Wire Wrapped Cabochon Chain Bracelet Tutorial
Вставка
- Опубліковано 8 тра 2021
- 2 pieces of 20 gauge square wire, each about 6.5 inches long
22 gauge half-round wire(just a small piece about 3-4 inches long)
1 cabochon (mine is a round acrylic rhinestone that is 18 mm in diameter)
Chain: 20 gauge square wire pieces that are a little less than an inch long(mine are about 23 mm long) -the number of pieces will vary depending on length of chain you need, I used 17 pieces.
Hook/clasp: 20 gauge square wire - 1 pieces about 85 mm
All my wire is dead-soft bare copper from Rio Grande
How I oxidize my bare copper wire using liver of sulfur:
• How to Oxidize Bare Co...
My pliers(Xuron Needle Nose): amzn.to/2Vghbyw
My Wire Cutters(Xuron Micro-Shear): amzn.to/2UcRWg4
My Round Nose Pliers(Beadalon Ergo): amzn.to/2U6ee3d
(the above are all affiliate Amazon links)
All about wire: • All About Wire (Wire W...
All about tools: • Wire Wrapping Basics: ...
General FAQ video: • FAQ: Stones, Wire, Oxi...
All about buying stones: • FAQ: Stones, Wire, Oxi...
My Website(where I sell my jewelry): oxanacrafts.com
Instagram: / oxana124
Patreon(where you can support me via donations): / oxanacrafts
Facebook: / oxanacrafts - Навчання та стиль
these kind of wire wrap design only suits certain kind of gems, in certain kind of situation. Normaly we design to reveal the best of beauty.
yes definitely, you have to make the decision if this design will work for your gem as it does cover up a portion of the stone.
I must say this is one of my favorites. Great job and tyvm for shaking😊
That looks cool. I love all the ideas you show for making so much. I think what I like most is you don't talk down in your videos. I feel like you are a great teacher of wire wrapping. I don't feel stupid when you are talking. I am just starting out in wire wrapping and in lapidary, so you are perfect for that. Thank you so much.
Great way to turn scraps of wire into a cute bracelet!
Pasaron muchas cosas y no tenía tiempo para hacer mi hobie favorito…..gracias por leer mis comentarios!!!!!
It's great that you packed an entire project clasp and all, into this one video. Thanks so much!
Very pretty! Thank you for demonstrating how to make it. 😊
You are so welcome!
Oxana, that is absolutely stunning!
Thank you for sharing this tutorial! I love it!
Thanks for making things so easy, it's nice that you go at a slow pace and explain everything so we'll. Love your designs as well.
I learn so much from your videos! Thank you for sharing.
I really like this!! Beautiful and something I think I can tackle 😊 TFS 🌸
Beautiful. Thank you. Your videos are easy to watch. I should say you are, because you have a beautiful voice, very relaxing. And because of that, I believe I can learn a lot from you. Looking forward to watching all of your videos.
Gorgeous
Love this beautiful jewelry creation 😍. I can't wait to give this one try. This may make a great graduation gift for my nephew 💙❤. Thank you for sharing this beautiful jewelry creation with me.
Thanks for all your no mystery video’s
Beautiful
Love your tutorials
Very good idea and very well done! Thank you for sharing,
Love, Love, Love this video. I made these links with 26 gauge wire many years ago for practice. They were too week to use for jewelry so I just stored them. It never occurred to me that I could hammer them to add some strength. Thank you for the inspiration.
Beautiful bracelet, great tutorial. You are so talented👏👌
Really loving your videos and they’re so relaxing to watch too 🙏😍🇬🇧
Thanks so much 😊
Love your jewelry videos. So easy to follow. Beautiful results.
Thank you so much!
Wow, so simple and beautiful project! TY dear! :o)
Beautiful bracelet! You're inspiring me to give jewelry making a try. Great videos. I love your energy. Thx, Oxana :)
I love it ! Thank you for sharing ❤️💋🥰
I really like the way this turns out. What a beautiful bracelet. Thanks for sharing your ideas and talent. Be safe and stay healthy 😷⚒
Thank you!
You do such a great job of explaining and to the point. Video is great. Thank you for your talent and artistic tutorials!
thank you!💕
Beautiful😍I love your tutorials they are very easy to follow ty.
Thanks so much 😊
Lovely!!💕
Absolutely Beautiful as alway's. I Love this design. Thank you so very much for sharing this with us. 💜💜💜💜
Thank you!
*Это красиво! Люблю твой талантик!)))))))*
Thank you ❤❤
J adore. Merci beaucoup ❤
Nice bracelet. Love it❤
Thank you! 😊
Woow, is beautiful🙏🙏🙏
beautiful... design ... can't cant wait to make it :) have the best mothers day...
Thank you!
2mm ,3mm ,4mm ,5mm, 5.5mm & 6mm are the size on the Bead Buddy jump ring pliers. Thank you for this beautiful tutorial I really enjoyed it!!
i love it
Beautiful project!, very inclusive and wonderful voice to listen to. I will be trying this bracelet to give as gifts 🎁. Thank you so much for sharing your talent.😻
Thank you!
Very beautiful! Deep blue+rose gold~😍❤🧡💛💚💚
Thank you!
@@OxanaCrafts I saw the wire bend in detail.
Even your hands looked as elegant as the wire design on the pendant.❤
Please understand that the content may be awkward because I am not good at English.
The camera work is amazing, great video.
Thank you!
Beautiful 😍😍😍👏👏👏👏
Thank you! 😊
Beautiful💕 Looks so similar to a design I have done. Great minds think alike!💫 Cheers✨
I really love the elegant yet simplicity of your design. And how easy it is to follow. The bracelet is absolutely gorgeous✨
I love your way amazing ♥️♥️♥️
Thank you!
Cool hint with the multistep bail shaping pliers is (and i use this tip myself so i can verify its truth on the beadsmith brand) the bit below the bottom bails (just above the pivot) is the perfect measure for the smallest mandrel (2mm diameter) so if you want to make sure that you have enough for a 2 mm loop, you can place the wire gently in the bottom part of the pliers with one side up against where you want your loop to end, and then cut flush with the other side, and you will have just enough wire to form a 2mm loop
Beautiful design, only thing I find is the weight of the stone makes it hang under the wrist
UM LIKE AQUI DO BRASIL VALEU 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
So pretty ❤️🇩🇰
Que lindo, amei
Congratulation
😍😍😍😍
more wire wrapped bracelet's plz
The first loop that you made, is referred as a SPOON....
Thank you for sharing your knowledge. I’m looking for the link you mentioned to these pliers. I’ve been looking for them.
Here it is: amzn.to/2Vghbyw
Omg🎉🎉🎉
🤗💐
Beautiful bracelet! Did you hammer the hook like you did the chain?
I did not because it being two wires thick would make it tricky to hammer
Don't you want to trim the wire scraps so the both ends are flush cut? They will sit better when rolling them into a loop.
Will this style work on other sizes and shaped cabochon?
Yes it will work with other sizes, and for shapes it should work for ovals too
I want to order wire from Rio Grande but I can’t seem to figure out the section on the page to find the wire like you use.
I just search for copper soft square wire and copper soft half round wire to find it on their website
Can we use same things for a square stone and other shapes?
square stone might slip out if all the wires are on the two sides of it where the loops are, you'd have to make sure to put some of the wires around the angles of the square so it is being trapped from all sides if you know what I mean.
I’m just starting in making resin pieces including cabochon but I have to ask about copper. I bought raw copper than turns your skin green. How do I fix that? I’d hate to sell a piece to someone only to get a bad review because it stained their skin. Thank you for your video. Very informative.
raw copper will turn some people's skin green, maybe you can put that as a disclaimer when you sell so there are no surprises. Most people like it because it is healing. Alternatively you could use brass or silver which won't turn skin green
Do you have anything more simple for beginners to make a bracelet with an oval cabochon as the center piece?
You could do this design with an oval instead of round. The most simple bracelet tutorial I have would be using beads.
You make it look sooooo easy. I tried it 3 times, all I got were mangled messes (sad face) (on my laptop, no emojis)
Oh no, I'm sorry it is giving you such a hard time :(
Hey can I ask for a request? , because I found a really beautiful bracelet and wanted to ask if you could do a tutorial on it ?💗
If it is a design that already exists and made by someone else unfortunately I can't as I would be copying the work of another artist.
Could I use any shape wire as I only have round
Yes you can use round
@@OxanaCrafts many thanks for reply. Have chosen this bracelet as my very first attempt to make something with wire!!! Wish me luck. xx
@@denniswilson3487 good luck!
How easy is your wire to bend.
it is called "dead-soft" so pretty easy to bend
How do use 20 gauge
My thumbs don’t bend like yours!
It's called hitchhiker thumb, only about 30% of people's thumbs bend back
Is this men's bracelet
I did not have a specific gender in mind when I made it, I think it can be for men or for women.
❤ Evet harikasınız bu konuda 👏🏼💞Güzel ve Akıcı Paylaşımlarınız çok harika ❤bende kanalınıza Aboneyim, sizi Takipteyim,,İyiki size Yutub da rastladım, tanışma fırsatım oldu sayfanızla.
Çok Sevgilerimi iletiyorum🇹🇷 Türkiye'den 💜💐🧏♀️💞Size❤
Beautiful
Beautiful