Is there any way you guys can make a printer-friendly list of amiibos and the settings for scanning them? The ones at your site are pretty much impossible to read when printing them because you use pictures and text that is way too small to see when printed.
Okay, so I just got my AmiiPad in the mail. It syncs up fine with my Switch OLED. The thing is, I want to update it via the software. So, when I connect my AmiiPad to my computer and open the AP SPI Flash exe, it doesn't detect my AmiiPad and shows "Disconnect" in red letters on the bottom left of the program. Am I missing something? Do I need extra drivers for using the AmiiPad on my computer? Or should I wait until my AmiiPad charges? I REALLY want to update this controller as soon as possible so I can use the new ANCH Series Amiibo bins, but this is the only obstacle in the way that's preventing me from doing just that.
I'm just about to buy one but I have a question, hopely you guys can help me, is already available the new animal crossing new Horizons amiibos??? Specifically the 5 series with the new neighbors?
Hello, new animal crossing villagers are available. But You need to update the controller by yourself to use the new amiibo . Pls refer to this page amiijoy.com/pages/amiibo-updates
hi, I need help. I just bought the control and tested it on my switch and it does recognize it and the buttons and joycon without problems but when I try to update on my pc it doesn't update me at all, and I want to use the amiibo command in animal crossing but the led colors they change by themselves and do not execute any command
@@amiijoy9755 I already tried it, I don't have steam installed on my pc, besides I don't use it, I already restarted my pc, and closed almost all the programs, and the update simply doesn't start, and when I connect my controller, it gives me this message , Device detect fail, please try again!. Please try another. and I don't know what to do anymore.
On the latest update 1.1.8 I keep on getting a lot of "Error" in the error column after updating and refreshing, I restarted my PC and tried again (3 times already) and I keep on getting the errors. Update 1.1.6 never gave me a problem. It also takes almost 3 hours to update.
@@amiijoy9755 you were right!! It was the one drive app that was causing the problem (didn't even know it was on after start up, I usually turn it off).
I just purchased the controller and when I plug it in my PC it doesn't show it as connected. Any idea why? Also is it safe to say that the controller may already be updated to the latest version?
@@amiijoy9755 yea, I tried with other cable and another ports in my computer only on the red leds and on my computer show message USB don’t recognise, when I open the Upgrade tool always is disconnected state.
The screen AP SPI Flash screen pops up then immediately disappears when I am trying to update. I have only had my controller for 2 days, not sure what I am doing wrong. Any ideas?
Make sure you close the steam app and cloud app like one drive . Plug in controller first and then run the api program. If you still can’t figure out please contact the customer support , webshop chat/Facebook page chat/email . They will assist you to update and use the amiibos feature
Is there any way you guys can make a printer-friendly list of amiibos and the settings for scanning them? The ones at your site are pretty much impossible to read when printing them because you use pictures and text that is way too small to see when printed.
We will check if possible to make the list better . Do u want to print all the list or list for specified game ?
i am wondering why i cant have steam open while using this program what does steam have to do with this?
Well I guess I'm definitely getting one now. Wasn't sure if I could get new amiibo or not after buying it :P
Okay, so I just got my AmiiPad in the mail.
It syncs up fine with my Switch OLED.
The thing is, I want to update it via the software.
So, when I connect my AmiiPad to my computer and open
the AP SPI Flash exe, it doesn't detect my AmiiPad and shows "Disconnect" in red letters
on the bottom left of the program.
Am I missing something? Do I need extra drivers for using the AmiiPad on my computer?
Or should I wait until my AmiiPad charges?
I REALLY want to update this controller as soon as possible so I can
use the new ANCH Series Amiibo bins, but this is the only obstacle in the way that's
preventing me from doing just that.
Hello, press the reset hole on the back of the controller with a pin and retry. Also change a USB port
Anyone has a link to the website trying to see if there is a update to the list for newer games
Could you maybe make a video on how to use the function: Customize the Amiibo Characters’ light/button combination?
What do I do if I can't open the BGS31 app? I already tried everything
when i try to update it says update all error and the app crashes, what can i do?
does this controller play well on pc games too?
How do I update the controller being I don't have a computer?
I'm just about to buy one but I have a question, hopely you guys can help me, is already available the new animal crossing new Horizons amiibos??? Specifically the 5 series with the new neighbors?
Hello, new animal crossing villagers are available. But You need to update the controller by yourself to use the new amiibo . Pls refer to this page amiijoy.com/pages/amiibo-updates
i have a mac how do i do this
hi, I need help. I just bought the control and tested it on my switch and it does recognize it and the buttons and joycon without problems but when I try to update on my pc it doesn't update me at all, and I want to use the amiibo command in animal crossing but the led colors they change by themselves and do not execute any command
Hello, try to close as many app as you can during update , like the steam app , one drive app, antivirus app …
@@amiijoy9755 I already tried it, I don't have steam installed on my pc, besides I don't use it, I already restarted my pc, and closed almost all the programs, and the update simply doesn't start, and when I connect my controller, it gives me this message , Device detect fail, please try again!. Please try another. and I don't know what to do anymore.
@@amiijoy9755 Is it normal for this to appear? Device detect fail, please try again!
Please try another.
@@sinnombre9509did you run the update program first and then plug in the controller ? And can your pc recognize the controller?
On the latest update 1.1.8 I keep on getting a lot of "Error" in the error column after updating and refreshing, I restarted my PC and tried again (3 times already) and I keep on getting the errors. Update 1.1.6 never gave me a problem. It also takes almost 3 hours to update.
It won’t take that long time.. try to close the app you cloud in your pc , it may have conflict with the update program
@@amiijoy9755 you were right!! It was the one drive app that was causing the problem (didn't even know it was on after start up, I usually turn it off).
How do I update IFYOO ONE Pro
Could it be possible a mobile app is made for people like me without a PC or laptop
So far we only have the pc version
Can this be done using apple? All I own is a Mac. Not a windows PC.
It requires Windows system
I just purchased the controller and when I plug it in my PC it doesn't show it as connected. Any idea why? Also is it safe to say that the controller may already be updated to the latest version?
Same problem that nobody else seems to be talking about
Just to tell you if you still need help when you buy the controller it will be updated to the latest version
Hi, Is necessary some one diver? Because my computer didn’t recognise the controller. So I can’t update the controller, could you help me?
Change a cable to try ?
@@amiijoy9755 yea, I tried with other cable and another ports in my computer only on the red leds and on my computer show message USB don’t recognise, when I open the Upgrade tool always is disconnected state.
@@Emacias05 the controller charge port could be defective , you may need to contact the support for replacement
@@amiijoy9755 okey I will contact they, only as comment if I can charge the control when the battery runs out, so I didn't think that the port was bad
@@Emacias05 It charges but it can not transfer data.
The screen AP SPI Flash screen pops up then immediately disappears when I am trying to update. I have only had my controller for 2 days, not sure what I am doing wrong. Any ideas?
Try to close antivirus app, cloud app , steam . Then run the SPI app again
I am having this same problem. Did you find a resolution?
@@amiijoy9755 I am having the same issue.
@@melissaberrones8041were you able to solve it?
After updating and refreshing, almost everything in the "Error" column says error. I've tried to redo it multiple times without success.
Hi, restart your pc and try again , better close other program as many as possible
have you updated it successfully? because I have the same problem as you. thanks
@@myh5240 one drive or steam run in the background during update?
@@amiijoy9755 got it thank your. I will try it again
@@myh5240 I continued to get errors, but I just ignored them and tried using the controller with Animal Crossing and it did work.
Nice
could i do this in a libary computer
It works if that’s windows system
How to get the update files ?thanks!
Update pack here amiijoy.com/pages/amiibo-updates
it says disconnect for me when trying to update it
Make sure you run the program first then plug in the controller. Check if the usb-c cable fully plugged in the controller and your PC can recognize it
Nothing comes up with I click Update All.
Make sure you close the steam app and cloud app like one drive . Plug in controller first and then run the api program. If you still can’t figure out please contact the customer support , webshop chat/Facebook page chat/email . They will assist you to update and use the amiibos feature
Now how do I do it without a PC
Need PC to update the controller