12 midnight oct 1962 ,fired up my first rebuild 283 small block . sitting on a wooden engine stand.. no muflers gravity gas line to the 2 4 barrels. 10 seconds of my life that I will never forget. THANKS FOR BRINGING BACK THE MEMORIES.
That Corvette sounds like a Beast and I can't wait to see how it will sound with the exhaust is fully instead plus to see the Corvette 1'st Test Drive!😁
If I could help tune Watch JR Goes Corvette I would drink the shot of whiskey and the cold Bartle Skeets and roll up the Number and get all schmoked up
Do you have any recommendations for deleting the Vats, Knock Sensors and EGR on the ECM? I just need someone to swipe the ECM to be able to start the engine on an LS?
I have Flowtech 11500 Flt long tube headers for my sbc. Hit and miss with them, sound and flow great but make some spark plugs and header bolts near impossible to reach
When you started it up at the beginning it sounded exactly like a boat my ex and I had (a Scarab or “go-fast” boat). Great sound especially on the water! 😁
I have no knowledge compared to you about mechanics. However I would like you to recommend me a good Corvette year to buy? I am in the market for a Corvette like that one. Thanks
If I were doing it, I'd make sure everybody involved in each of your videos was introduced to the viewers, and maybe a little about them if they haven't been around before. People just to appear and disappear without attribution. But I'm not, and you are, so. . . OK, you did introduce Chris.
After all the anxiousness and excitement that jr constantly expressed about getting car to start and run, he was not even close to having it ready when the tuner arrived. No coolant, no maf/map, no brakes ready, I think, exhaust just barely ready before the tuner arrived, etc.,wtf jr , quit fooling with starting it a dozen times and get your shut ready! We all want to hear the beast, but you have stalled on many items that could have been ready earlier.( I know you were waiting on some parts) but the coolant and the air sensor?Are the wheels even ready to be put on ? If not, how are you going to drive it tonight ? Love you and what you do , so no need for anyone to blast me, I was just giving my insignificant option!
12 midnight oct 1962 ,fired up my first rebuild 283 small block . sitting on a wooden engine stand.. no muflers gravity gas line to the 2 4 barrels. 10 seconds of my life that I will never forget. THANKS FOR BRINGING BACK THE MEMORIES.
That tuner was fast! Heck yes!!
Get him to tuneup the road runner/satellite!
@@B0xlife1 Randy has a Plymouth Roadrunner Not a Dodge Challenger.🤦♂️🙈
@@kirkacola7942 it's a Satellite lol not a Roadrunner
Well he is Chris Johnson, ran the 40 yard dash in 4.24 seconds back in the day.
@@kirkacola7942 lol I didn’t pay much attention honestly
The sound and starting difference in tuned vs untuned - amazing. So close!
The tune guy gets an intro but not the guy we see every day holding the camera and helping out 😜😂👍
Dorrell has been in videos before lol
He was in the last Vette video for a few seconds on the first start up with open headers. It sounded so nasty he had to react.
@@WatchJRGo If one misses the video in which a new friend is introduced, one may miss one's only opportunity to know who they are.
Rastaman Vibration!
Lol! That little snippet at the end “and don’t forget to shop watchjrgo” (Fail) 😂
Yep 😂
WatchJRgogo 😅
Glad Chris was able to get it lined out!!
That Corvette sounds like a Beast and I can't wait to see how it will sound with the exhaust is fully instead plus to see the Corvette 1'st Test Drive!😁
I have such a new found respect for gys working on Corvettes. I never realized how complicated pulling engine trans and torque tube
Easy to work on and service... Cheap too
This does not look very modular. Considering how everything requires complete removal of entire powertrain.
@@windronner1 dumb design like most GM stuff after like 1992
@@ryanm4319 LoL. Otherwise known as a dealer only service. Or specialty corvette shop that thoroughly knows. Go JR. 👍
Awesome JR - sounds great, with the new exhaust you'll fall in love with it....great build, thanks for doing it!
Love it when an outro comes together.
I am looking forward to the first run to the drive-through.
Very cool! I still can’t believe how cheaply you bought this car!
What a difference the proper tuning makes!! Sounds very cool!!! Look forward to seeing the final result!!
If I could help tune Watch JR Goes Corvette I would drink the shot of whiskey and the cold Bartle Skeets and roll up the Number and get all schmoked up
Such a nice build, this is going to be fun once ready.
Fun video JR. Looking forward to seeing it drive! Certainly worth more than $3.5K.
Good to see it running
Like your earlier posts. Your late night ones was killing me and pissing my boss off when I kept falling asleep
Look forward to test drive!!
We need to see and hear more from the camera guy. He seems like a cool guy!
Woohoo it is finally running.
Do you have any recommendations for deleting the Vats, Knock Sensors and EGR on the ECM? I just need someone to swipe the ECM to be able to start the engine on an LS?
Great video from JR.
I have Flowtech 11500 Flt long tube headers for my sbc. Hit and miss with them, sound and flow great but make some spark plugs and header bolts near impossible to reach
Great job! Streets are callin!!
the air bridge was cleaned but i never saw a new air filter go in ?
Should I get headers for my vette. I saw a video saying that they will destroy your engine something like that.
Great work!
What about that white truck on other side of shop ? S10?
Great stuff thanks!!!!
We're back with JR's $35 Corevette, CHEAPEST IN THE USA!!!!! WHOAA - Video title.
sounds great can't wait too see how she pulls!
It's nice to see John bait us with the O2 sensor comments.
Sounds mean, way to go !
Good luck jrgo.
When you started it up at the beginning it sounded exactly like a boat my ex and I had (a Scarab or “go-fast” boat). Great sound especially on the water! 😁
A favorite of the Boys of Bogotà. 😉
We saw tthe debut of WatchJR's new Composition For LS Hose in F Major.
Soooo whos White S10 is that in the background there?! new project? or someone else using lift space for now?
Are you running the orange gm approved dexcool? That looks like yellow coolant.
I think he is using Peak coolant which is a good brand and he isn't mixing coolant because he had the entire system apart.
Hope you take the old owner for a rip in it when you get it finished.
Sounds pretty good! At least when the magic sound isn't giving heart attacks...
Great get!
Nothing like sweet success
Sounds awesome!
That is a nice corvette, I bought a battery for mine today but the rain wouldn't stop and was depressing me. I had hard time going to store.
I'd totally buy a Taco Bell shirt from your store!
Do excited to see this run
Want kind of race car is this going to be? Thanks for getting a video out early for us East coasters.
How common is the red seats and carpet because it looks way better than black
lifters or injectors ticking?
Awesome ! What Vette are you going to get next?
What am I going to watch before work tomorrow morning? I never catch the drop before I go to bed.
I have no knowledge compared to you about mechanics. However I would like you to recommend me a good Corvette year to buy? I am in the market for a Corvette like that one. Thanks
Congrats!
You seem pumped!
Dang got chris on board?! Hot dang!
If I were doing it, I'd make sure everybody involved in each of your videos was introduced to the viewers, and maybe a little about them if they haven't been around before. People just to appear and disappear without attribution. But I'm not, and you are, so. . . OK, you did introduce Chris.
Your slippin detail the car before you drive it lol 🤣
if you ever find a mobile dyno for sale you should buy it, just for fun and giggle smiles per hour etc
I really enjoy your content! Keep it up!
Finally you’re working on the vet again
I literally just replaced the bottom hose on my work truck 60 and now we need a water pump
Sounds great! 👍
I didn't even know I had a tuning company in Wichita... Do I tune Vipers at all?
No, mostly LS stuff 😂
YEAH BABY!!
Whos the best youtuber! David dob... i mean watch jr go! 🥳🎉
Corvette sounds awesome! But anyone else wonder why he never wears any of his own shirts
Rally Fighter 💪🏼 😁
10:03 lol sorry, I couldn't resist.
8:13 looks like you need new motor mounts
Hey JR....who is your friend holding the camera for you?
Nice wirk
You should have mercy with "cool shirts not like this"
what you paid and what you put into corvette still cheaper than new corvette.
14:25 Who would've figured that you had a Hookah under the hood.
Gonna have it detailed ?
Oh for sure
Work
I didn't know Drake was into tuning cars up. Lol
Sounds really good and the ending was pretty kweal also. Lol 😆
That cam sounds kind of small...
Nice!!!
the corvette sound good and it will be fun to drive in the summer time and it look good paint red
Hey!
got here early still watching bet she rips tho
Did you replace the motor mounts?
👍🏻👍🏻👍🏻
Lol we sell tones of air pumps on a daily basis
I'm saying $7to $9k easy
Burn out time!
😊
You should buy a really old motorhome and restore it
At the end, I thought you were just going to strip down "not like this" and we'd be in for a real show. LOL
I'm a Mustang girl, but the sound of that Corvette makes me want one soooooo bad. 😄
Dang, you're early!! KaBoom!
Woot woot!
I think it needs a mount LMAOOO
After all the anxiousness and excitement that jr constantly expressed about getting car to start and run, he was not even close to having it ready when the tuner arrived. No coolant, no maf/map, no brakes ready, I think, exhaust just barely ready before the tuner arrived, etc.,wtf jr , quit fooling with starting it a dozen times and get your shut ready! We all want to hear the beast, but you have stalled on many items that could have been ready earlier.( I know you were waiting on some parts) but the coolant and the air sensor?Are the wheels even ready to be put on ? If not, how are you going to drive it tonight ? Love you and what you do , so no need for anyone to blast me, I was just giving my insignificant option!
Let's go Brandon!
Leave the exhaust off and fit in at no muffler Newton……
$3500 = $25000 +