How to Replace Radiator Cooling Fans 2010-2013 Ford Transit Connect

Поділитися
Вставка
  • Опубліковано 1 лют 2023
  • Buy Now!
    New Dual Radiator & Condenser Fan Assembly from 1AAuto.com 1aau.to/ia/1ARFA00503
    This video shows you how to install radiator cooling fans on your 2010-2013 Ford Transit Connect. Radiator cooling fans keep air flowing over the radiator when the vehicle is stopped or moving slowly. They are an important piece of your vehicle’s cooling system. If yours is failing, or broken, you should replace it immediately to avoid overheating and causing more damage to your vehicle.
    This process should be similar on the following vehicles:
    2010 Ford Transit Connect
    2011 Ford Transit Connect
    2012 Ford Transit Connect
    2013 Ford Transit Connect
    Tools you will need:
    • 10mm Socket 1aau.to/oaRR/1AXAA00017
    • 8mm Socket 1aau.to/oaRR/1AXAA00017
    • Trim Tool Set 1aau.to/oYm/1AXXX00006
    • Needle nose pliers 1aau.to/oyY/1AXAA00051
    • Needle nose pliers 1aau.to/oyY/1AXAA00052
    • Torque Wrench 1aau.to/oaqz/1AXAA00044
    • Gloves 1aau.to/oEZ/1AXSS00048
    • Safety Glasses 1aau.to/oyG/1AXAA00343
    • Pick 1aau.to/oF5/1AXAA00037
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 4

  • @TRQ
    @TRQ  Рік тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @kirkpratt
    @kirkpratt 3 місяці тому

    Great video, much appreciated

  • @edy5082
    @edy5082 Рік тому

    This can be done with Jack stands, no need for a lift

  • @robburnquist
    @robburnquist Рік тому

    I must have missed the part where we go buy a garage lift and mount the vehicle 😅 very crucial but left out