Husqvarna AWD Drive Belt Replacement
Вставка
- Опубліковано 7 чер 2022
- My AWD Husqvarna HU800AWD has been sitting for almost 3 years and it also needs the drive belt replaced. Then I find out it needs the 3 idler pulleys as well. Don't worry I get it all worked out and get it running on 3 year old ethanol free fuel. Tag along with me to figure out how to replace the drive belt and the 3 idler pulleys on this Husqvarna mower.
Thanks for Watching. Please Like & Subscribe!
New Videos Every Wednesdays & Saturdays
Checkout DJ's Hot Rods & Fabrication!
/ 644100722353291
@Djshotrodfab On Instagram
#husqvarna #diy #lawnmower #mower #smallengine - Авто та транспорт
The easiest step by step instructions
Thank you.
Thank you so much for showing it close up with that little spring went.
Your welcome. It's a weird little spring
If you take off the two bolts for front housing it pops out enough so you don’t have to take off the whole axle
Best how to video for this. Thanks!
Glad it was helpful!
Thank you for a very good demonstration.
Your welcome
Thanks so much for showing where the tension spring goes. When i was cleaning the area, it came off and had no idea where to reattach it.
Glad I could help
Thanks! One of my pulleys just seized up yesterday and completely destroyed itself and the belt.
That seems to happen pretty regularly with these things. I guess its a maintenance item. most of us don't worry about it. we just mow our lawns until something stops working. Mine was only on its second year of mowing when this happened.
Thanks for the video. I'm about to replace that belt and this helps me know what I'll be dealing with. By the way, your shop looks rather clean to me.
Happy I could help
About to do what you did. Thanks for letting me know what the process will be like.
Glad I could help.
Thanks for help have to do this with mine soon
Your welcome. Glad I could help
Great video - As complete as it gets for pulley and belt replacement. I had to modify the bracket on mine since the part that screws into the deck broke off, which tore up 2 pulleys and snapped the belt..... had to drill a hole on the other end of the bracket and put another screw in. So far, everything is working again..... coz pushing the mower up a hill without AWD really s@cks!!!!
Thank you again !! 😃
Glad I could help.
This was a huge help. What a terribly designed cover - oye ! Thank you!
Glad I could help
You think that one is bad, try a newer craftsman/briggs and Stratton mower deck. 😂
Do not screw in oil dipstick on Hondas. Wipe just put in check oil. Then tighten her down
I didn't know that was the proper way. Thanks
DJ, those pulleys have a bearing cover that can be easily popped off with a knife or pick. They are dry with no grease! Put a little grease in them so they will last a lot longer!
Thanks for the advice!
I have a similar lawn mower, and so much grass gets under that plastic cover that it rots and almost smells like cow dung. And the more you mow the lawn, the more grass goes into it, making it very heavy.
Yep, mine did something similar. Just have to scrape it out.
What does the retainer washer look like that holds the blade
Not sure, I don't have the mower anymore
Moral of the story, never buy a self-propelled mower again... I'm facing this (and likely a stripped gear in one of my rear wheels - may just be easier to replace the thing... GREAT video though!
Sorry for your troubles. It definitely overcomplicates things. I ended up pushing this thing for the rest of the mowing season before I fixed it. It's nice when it works
What we call those little wheels that spin the belt . My mover belt broken and found out 2 of those little wheels not spinning like in this video but Lowe’s don’t carry those parts . I want to order them online but don’t know if it is really called wheel ??
That is the drive belt and drive belt pulleys. You might want to order the whole set. There's three pulleys in a belt.
Bad photography. You need 100 watts of light more. Maybe 200. Otherwise a pretty good explanation of the process. I will save the video for that reason alone.
Thanks. I'm in a new shop with a lot more light. Lighting and audio are always a struggle for me. I know a lot about mechanics/fabrication and practically nothing about videography.
Dude you are very good. Don't stop creating your content@@DJsHotRodFab
3 pulley and belt, 45.00 ebay
Did you get yours fixed?
@@DJsHotRodFab yes it’s a customers
Why not grease the wheels shafts
The pully doesn't spin in the shaft. The pully spins on the bearing. putting grease on the shaft wont do anything for you.
Pack rat?
😂 probably
This is horrible!! It shouldn't be that hard to do.
It's definitely not a fun job.
You dare to speak the truth ?
It’s not hard after your first time
@@philliphall5198that’s what she said!