Mine is 2WD but if you decide to do a spindle lift on a 4x4 you’ll need to remove cv axles and use 2wd wheel hubs. I just got the cheap maxspeedingrods spindles for like $145 no issues
I have good luck with local used tire spot in my area. I paid $200 each for a set of 35x12.50r20 and 37x12.50 r20. The latter is what I want you to put on my Yukon after you do your magic. The 35s i stuffed on my OBS k1500 with snowflakes. Im not going flashy for the yukon and Suburban not wheels anyway. Kinda feelinf like doing a throwback to a time where the music was far better, at least😂, yes im a young-old 🥷 at heart.
excited for this build bro it looks mad good already. but you think i can get away with spending around $330 on amazon lift spindles without them screwing me over in the long run? cus i can get 5" spindles and 2" bottom level for half the price of maxtrac spindles but i dont want to have to pay for it later on
@@BackyardBuiltPerformance Bruh I been playing that song since I first heard started watchin you last year. Your mixtape on my most replayed on Apple Music but this one my favorite frfr
Got the keys off Amazon they are the KSP 3” Chevy lift keys, I’ll link the uppers below: Upper Control Arms for 1999-2006... www.amazon.com/dp/B0BBZR8VGH?ref=ppx_pop_mob_ap_share
@@rogeraverill8989 don’t really install step by step on my channel, it’s really for folks who know what I’m talking about that need tips or maybe another way to go about things
Already looking good 🦅 keep the content coming brother 🤠
Those grapps on 17s gonna slap clean and simple
i see that wasp killer on standby i feel that lmao
I hope this channel takes off. You seem like a good dude with motivation! Keep it up homie. Do you install body lifts?
I don’t unfortunately but I appreciate it man!
@@BackyardBuiltPerformance no problem brother hope to see your videos blow up soon man 💪🏻
Did you change the hubs to a 2wd hub?
@@shorty6469 mine is already 2wd but if you are 4wd you’ll need to swap
Hell yea I fw it dawg
Nice bruh stance 🔥🤘🏿🤘🏿💪🏿💯 Yes sir!!
Yukon is coming out clean , I got the same lift setup on an avalanche but 3 inch lift shocks, would u recommend the 6 inch shock?
You have a 4 by 4 four-wheel drive what 3-in spindle should I purchase the ones on Amazon say two wheel does it matter?
Mine is 2WD but if you decide to do a spindle lift on a 4x4 you’ll need to remove cv axles and use 2wd wheel hubs. I just got the cheap maxspeedingrods spindles for like $145 no issues
I’ll see ya soon mane 💪🏽
How do those upper control arms ride?
@@GavinBose they’re pretty decent, no issues no boot tears and the bushings are still in good shape prolly cause I’m not maxed out like most
@@BackyardBuiltPerformancetrucks clean man love the color
Was your keys maxed?
@@PostinQuickies bout 3/4s of the way up
Farm use tag goes hard
What tie rods did you use
@@89HamSammich just some I found on Amazon
I have good luck with local used tire spot in my area. I paid $200 each for a set of 35x12.50r20 and 37x12.50 r20. The latter is what I want you to put on my Yukon after you do your magic. The 35s i stuffed on my OBS k1500 with snowflakes. Im not going flashy for the yukon and Suburban not wheels anyway. Kinda feelinf like doing a throwback to a time where the music was far better, at least😂, yes im a young-old 🥷 at heart.
This just motivated me. What’s the link to the material for the headliner ?
Suede Headliner Fabric with Foam... www.amazon.com/dp/B0CSCLRKSW?ref=ppx_pop_mob_ap_share
I put 3” keys on my Tahoe 2004 4x4 and my keys are barley up at all and my control arms are already sitting on the bump stop
Are tie rods specifically for a lifted truck or are they just new oem ones?
Just oem replacements
@@BackyardBuiltPerformanceok presh8 u dawg💪🏾
You get ford keys or chevy ?
Chevy
excited for this build bro it looks mad good already. but you think i can get away with spending around $330 on amazon lift spindles without them screwing me over in the long run? cus i can get 5" spindles and 2" bottom level for half the price of maxtrac spindles but i dont want to have to pay for it later on
I think you’ll be fine with them
@@BackyardBuiltPerformance thank you man ima try it out
Whats the paint code?
WA214M
Whts yo intro song thts hard
Sorry - RicooBanzz
@@BackyardBuiltPerformance Bruh I been playing that song since I first heard started watchin you last year. Your mixtape on my most replayed on Apple Music but this one my favorite frfr
I been playing rico in my rides since 2020
Whats the links to your parts? Especially the keys and control arms?
Got the keys off Amazon they are the KSP 3” Chevy lift keys, I’ll link the uppers below:
Upper Control Arms for 1999-2006... www.amazon.com/dp/B0BBZR8VGH?ref=ppx_pop_mob_ap_share
Bet. Thatnks bro. Looks good.
Another question. What spindles you run?
@@ejayhenderson6638 3” lift spindles
That’s definitely a Bermuda blue truck right
Yessir
@@BackyardBuiltPerformancecould tell my 2007 Avalanche has the same color. Coolest color GM ever put out
@@vaggnick1920 I’m gonna repaint it the same color I love how it hits in the sun
I got some brand new 33 mud tires rbp mt
Mann find me one boe 😫😫😫
Not much sense in showing a video when you’re not showing how you did anything we’re good as the video just my thoughts
@@rogeraverill8989 don’t really install step by step on my channel, it’s really for folks who know what I’m talking about that need tips or maybe another way to go about things
👎🏻
I’m building my 03 Yukon with you my guy 🫱🏼🫲🏾