Turning a Sub $100 DELL OptiPlex into a FAST Gaming PC
Вставка
- Опубліковано 23 лис 2021
- If you want to convert a Dell Optiplex (790, 990, 7020 and 9020 etc.) into a full fledged gaming pc, then this is the right video for you.
Sponsor: quickly and easily get yourself activated on Windows 10 Pro for only $12 using the coupon code "BFTYC" on checkout www.vip-scdkey.com/sk/BFTYC
Check for OptiPlex's with i7s (they are even really cheap on ebay): ebay.us/lv1XjM
pin jumpers: ebay.us/SDq9hW
GTX 1060 3GB: s.click.aliexpress.com/e/_ALAayc
✅Shop Aliexpress WorldWide: s.click.aliexpress.com/e/_etUbxJ
✅Shop on Ebay Worldwide: rover.ebay.com/rover/1/711-53...
✅Amazon US: amzn.to/3j0CsHM
✅Amazon UK: amzn.to/3lG7TJh
✅Amazon CA: amzn.to/3nPEhLq
💯Merch - www.redbubble.com/shop/techyes...
❤️Support Directly - / techyescity
💻Discord Access - / discord
-------------------------------------------------------------------------------------------------
DISCLOSURES: Generally all links tied to products are either Amazon, AliExpress or Ebay Affilaite links, this means that if you purchase a product we earn a small sales commission, which costs you nothing extra (if you end up purchasing a product). All sponsored content will contain the word "SPONSOR" if directly sponsored or "AD." Any additional revenue stream will be disclosed with similar disclosure.
Music Provided by either: epidemicsound, audio library or royaltyfreeplanet.
#hustle #used #techyescity - Навчання та стиль
Lots of comments about adapters being available so why bother like I did in this video? I checked prices of the front i/o and power switch adapter kit, would cost me $57 AUD to get those connectors shipped to Australia. I pick up the whole hardware itself cheaper than that a lot of the times....
Separate from what you said, on the newer 6000 and 7000 series intel optiplex's you can use the Qtj1 and Qtj2 ES 6 core cpus from aliexpress with a bios mod on them, I have a friend who is running it with an old hd 7870 6gb
You did a good job on the video Bryan. I know tons of people who have these builds with these stupid errors. The whole point is to keep it cheap. Keep up the good work
That sound card was $30 Bryan! $25 shipping?😆
you do know to go to ebay an get a Front Panel Header Adapter Kit For Dell Optiplex
ive had a gtx 1060 on an alienware x51 motherboard in an asus mid tower
These are great value for money boards! These also work with E3 Xeon chips, so I have found E3-1220 (i5-2400) CPUs for $15 USD or less. Pair it with a nice 2GB GPU and you have a custom gaming PC for around $200-$300 that will play all major eSports games respectably.
Yep. The E3-1230/E3-1240's (i7 2600) go for around $25-$35.
@@The_Plump wait so it works? if i just buy e3 1230 on my dell 790
@@The_Plump or theres some setting in the bios
@@speedwagon5951 Should just straight up work but they don't have iGPUs so you need a dedicated GPU.
@@speedwagon5951 you may have to enable Hyper threading in the BIOS. Sometimes Dell has it disabled by default. Otherwise it should work.
Bry man, thanks so much for all the excellent content the last year or so. I used to build 2 or 3 pcs for general sale each year, until the pandemic hit and the market went haywire! When I watch your content, it scratches that price performance itch by proxy. Really appreciate it dude. All the best and Merry Christmas!
Thanks for making this video. Very detailed n most importantly, it solved my headache regarding the power button issues where other videos failed to do. Bless u mate
Great video Bryan. I've converted a few optiplex sff in the past. They are tricky things to get going but fun to troubleshoot, and rewarding when you get them running in a shiny new case
Absolutely love it man!!! Such an amazing complete guide!
man I love these videos I want to see a lot more use/budget builds for techtubers
THIS IS THE VIDEO IVE BEEM WAITING FOR! I've done so much looking around for videos on how to get around the connectors and such and this has saved me! Thank you Mr. Yes Man!
second that!
3way that
Foursome that.
@@boingkster ok handsome 😉
I have been meaning to do it for a long time! and funny story that I didn't talk about in this video, was those connectors on the bench in the broll were actually left overs from when I was going to do it the last time, but the motherboard pull ended up being completely gonskis, so I just took the CPU and ram etc. Though this time when this one came in I thought "we are doing this".
Dude I look up tp you like crazy, thats why I started my own channel and this is literally gonna be a life saver!! Thank you Tech Yes City!
what a great video TYC managed to help me with many issues I've had in past
I want to see a lot more use/budget builds for tech-tubers, please keep up the good work.
Great guide Brian! The pin bridging was new to me, but l've dealt with censor and fan before. Maybe a future video on finding good motherboard power adapters (24 to x pins) with the various newer OEM machines?
Thanks for the video! Have been living with those 4 errors for the last 2 years. Might be time to actually fix them next. Cheers
Cool to watch these transformation vids. Have done a few recasings. Usually end up having to swap out the power supply in adding a proper gpu anyway.
THANK GOD BEEN WAITING FOR A CLEAR GUIDE THX
Thank for this vid bud actually doing similar build right now helped a lot mine ended up bit lower end mid you with 260x and only 11gb ram but still holds up for esports with that i7 👍
Bryan your knowledge with this pc's are incredible man
I love this video you can still use these great Dells for music productions, i5 and i7s are plenty of processor power for it. Power supplies are also cheap now non modular of course. Thanks Brian you did it again, I bought a HP Z600 and OptiPlex because of your videos. Cheap is my middle name.
Audio upgrades are underrated. They just make the pc experience even better.
Dope vid I have struggled with this in the past - v. useful tips and knowledge. Thank you
thanks for this Brian it was much needed.
This video is so helpful!!! I had to keep the old front panel because of these connectors on the motherboard. Now I can get around that!! Thanks!!!
Great work on all the Dell proprietary stuff!
You can "jump" the data wire over to the next fan connection so both connections read as connected even though only 1 actually is, eliminating the need for a fan placed flat on its back doing nothing.
thank you so much for this video, cause i moved my old pc in a new case and had to use the old power button and it was kinda wiggling up on the case ports, and now i could use the normal case cable
Crazy you got that working. Well done.
I did this conversion recently on a 3020 small form factor, currently doing it on a 9020 haswell sff unit. Like what you said, adapters are good if youre willing to pay, not feasible if you're not in the US (the only place that makes the custom mini boards for the power and front panel adapters is Harbin in Georgia, USA). I learned a lot from the work arounds you had to bypass the boot warnings. These 2nd/3rd gen Intel optiplexes are the last time Dell used a regular ATX PSU connector, the Haswell and later optiplexes need an additional PSU adapter if you're doing a case swap.
Awesome video Bry 🥰👍🤩🤯🏆! This was a time when “pc tinkering” was an art form of the more technically inclined with pc’s as was the traditional overclocking 🥰🥰. Ahhh, the good old days 🥳🥳
So cool you came with this one out ✌️
Love your videos mate, have done a heap of these from 9010 sff, I just rewire everything, no adapters
I've done a few of these. Surprisingly capable machines.. and they look pretty good with RGB bling.
I did this a few years back. For the power switch, I spliced in the power in and led connectors then used heat shrink tubing. The front audio/usb cable I zip tied to the bottom pci slot to keep from moving.
This is awesome, I picked up an optiplex from my neighbor who was just throwing theirs out earlier this year before the snow fell. Been sitting in my room and I've been meaning to clean it, but I just never knew looking at the parts what I'd end up doing with it. Thanks for the inspiration, I'll see if I can flip this.
Did you build it?
personally love these kinds of builds the extra problems experienced with proprietary connectors is all part of the fun but in the instance i don’t have a or can’t afford a case swap oem case modding is just as fun
Like father Xeon was saying, there are adapters available, but depending on where you live they can be kind of costly. Also, there tend to be different boards even used in the same product line, so some of these are very easy to transplant and take almost no work, while others need a fair deal of troubleshooting… So this video is a godsend for anyone looking to put together a budget PC with a pretty thorough guy. Thanks for the video!
new member to the tech yes loving ,hi all. love the work. been following for some time . just was lazy lol
Great work mate! I do really hate this Dell to convert in Gaming Case, but now I'm confident! Gonna try this soon! Thanks Brian! =D
Nice one dude, thats pretty much what im gonna do, ive took pictures of your fixes por el power switch and the other stuff, Cool!
Love the vid Bryan. Did almost the exact same with my girls rig a couple years ago down to even the add in sound card, only thing I did different was I wasn't sure how to short that 34pin connector, so that ugly front I/O hung out till her upgrade recently! Those sff optiplex can be some used bangers
Fantastic video, thanks for posting this. Subscribed 😊
love this sort of content, tech yes city you are the goat thank you for the video
Jumpers were the only way to configure hardware addressing back when I was a kid. The juggle of "old ex upgrade" hardware was mostly forcing it to work together as platform compatibility was still in its infancy. It was referred to as bridging the pins, not shorting.
Computer building and repairs have changed a lot over the years I remember when you left the pc plugged in to ground yourself now they no longer do that. But that was like 18 years ago.
@Chris yeah in 1998 I was taught that cause if you open the psu you will see it is grounded to the case and if make sure to touch the case while working in it that gives the esd somewhere to go.
man good deal! i been wondering what to do with the fan case lol great place and thanks for the idea!!!!
Great video! Thanks for all the info!
Long Live The OptiPlex!🤘
I would like to thank you for the tips, it worked very well on my pc, thank you very much
Tips and workarounds around Dell motherboards are great. Not a lot of people are touching this subject, i hope for more maybe with higher Dell models. Workaround with fans could be great in those bigger 2 socket towers.
I have a Dell Optiplex with an i5-4590, R9 Nano and 12gb (4x4gb) ddr3, it's excellent for a budget build and the R9 cards are still relatively cheap due to their bad rep, but with a bit of undervolting and a sturdy 500/600W PSU it'll run fine given that you buy the PSU adapter for a proprietary Dell board. If all you play is ~5 year old games or esports one of these builds are great.
tip: there are two pins in the proprietary dell power button header for blinking error codes, you can plug your HDD activity light front panel wire into those two pins to keep your error code functionality
the old jumper pins :O havent seen them in forever, when we use to use them to set a hdd as master or slave... forgot about them. thanks for that trip down memory lane lol
Happy new year Bryan and everybody.
Thanks for putting up this video. I just got the motherboard for one of these (the MT model) to make a decent low end gaming pc for my nephew. I can stick an i7 2600 or the K variant in it and pair it with a gtx 750 ti or 680. As long as it can play Minecraft, Among Us, Fortnite and some emulated games, he is happy.
My absolute favorite builds to do. TechYes=BudgetKing
Brilliant vid! So many people throw these out for vergeside pickup. I think I might have one lying around and already have the adapters needed :)
Brian, the man of miracles. Man loved the video and the PC
DLM Tech garage (precision/optiplex build guide) has a video that covers all the adapters you needed for this build and avoid all of those error messages and annoyances you went through with the front panel. It will make this a cleaner build.
I have an Optiplex 790 and the on board audio is actually quite good. Better than what many mainstream boards have.
Jumper plugs to the rescue ;) I did this very same thing with a Dell optiplex 790 board. Jumping pins 3+4 on the power port fixes the power cable issue. the front usb header errors can also be bypassed by jumping the 4th set of pins from the left. can then use a PCI-E X1 slot to add a USB 3 card so there is a header for the new case front I/O. Dell fan header adapters are cheap luckily.
This video is EVERYTHING!
TYC you are the magic man!
I have done an optiplex case swap two times in the past, was an absolute nightmare without adapters
Nice guide. I didn't realize these Dell motherboards were such a pain. The HP Prodesk 400 boards are way less work to mod in my experience. You just have to solder a bridge wire on the USB ports and cut a little piece off of the case fan header plastic then they work like a standard ATX board.
I remember I did an experiment on the Optiplex once. The power button jumper (5 pins one), 2 pins are designated for power button, the other 3 pins is designated for power LED. The LED is dual colour, if not mistaken, having 1 common ground and 2 inputs to signal the system is switch off, standby or hibernate in amber colour and the system is switch on in blue or white colour.
And as for the Front Panel IO, it is possible to use the existing Front IO port, and you can cut those cable and solder jumper pins so you can just plug in the USB cable from the case into it, but you need to check the connection.
Anyway, As for Dell desktop system (Vostro or Optiplex or Precision) up to third gen Intel Core i series can actually move to a new case with a few tweaks, but most of them uses standard stuff.
Thanks TYC, been working with OptiPlex 990 MT's a while (and lately some 9010's and 9020's) and done a few case swaps, never knew it was that easy to get rid of the Front I/O error as well as the power button error so I'm definitely going to try that. Keeping the temp sensor is easy enough but as for the system fan I'd rather not keep the original since not many cases accept fans of that size anymore so I'm gonna see if I could just cut the connector off and short some of the pins to get rid of the error
Also, connecting a standard front power button connector directly to the left most pins of the 5 pin is what I've also done, but I've found it's not a very secure fit and can come out easy but I assume this will vary from connector to connector because of slightly different sizes. One last thing, the OptiPlex 9010 MT motherboard has a USB 3.0 header but the fit is slightly different (Dell used a locking USB 3.0 cable, which I have no problem with as those things are too fragile standard) but it does work I believe for standard case 3.0 cables. This combined with the fact that the 9010 still uses a standard MOBO 24 pin power and also has rear USB 3.0 makes it the ideal OptiPlex board to use for case swaps in my opinion since pretty much any case you buy now-a-days will have front USB 3.0 and having 3.0 speeds is very useful for things like flash drives or connecting drives externally. Can of course use a PCI-e USB 3.0 adapter but this makes it easier
I have done this in the past... i even tore out the front io on the dell optiplex and did EVERYTHING i needed to do to get rid of ALL the errors.
I love Optiplex builds, I usually keep the stock case though, I kind of like the “sleeper” look with them. Good video man 👍
You are limited to gpu options though
@@samuelmccoy5505 not if you remove the hard drive cage like me in the optiplex 7010mt
@@MF.Shadow thats for mt I was talking about sff
All depends who the end user is going to be, kids wants LED bling.
Would love to see you trying working magic on more modern Dell pcs
Your a clever little duck! subbed immediately Bryan, you know way more than me bro and that's heaps ;) G'day from west QLD
Thanks for the sub!
Ty sm 4:15 been trying to fix my pc for days was about to hang omgg
I have done the 4th gen conversion before. I kept the motherboard ends of the dell case cables and wired standard layout pin blocks to them so that you could just plug in the new case connectors into those as extensions. The extra pins on the 5pin power button header are the power buttons leds, so you can wire it up as a power led and a power switch header for the requisite case cables. These adptations removes the errors and still allows you tto use the on board usb, hd led, power switch, power led and sound facilities. Less to add, more profit to gain.
Also you don't need to keep the little fan in there. Cut the cable off it and put a standard wired pwm fan header tto the cut end to move the errant wire to the correct side. Then you have a working pwm fan header on the motherboard. Dell's proprietary fan header just moves the pwm cable to the other side, so you just have to switch it back.
Sir! You're a legend!
Amazing. Love it!
My first PC was an Optiplex 790, and after bouncing around various junk gaming PC parts around I've returned to it and gotten some surprisingly good performance with just an Nvidea Quadro and 16 Gb of RAM. Games run pretty well if I tweak the settings a bit, and I've yet to run into any issues with the hardware. I even managed to pull a 2nd-gen i7 from a burned out machine and the processor was so much better than the old i5 it came with. If you can sneak into a recycling center and have the time and patience, building a hacky machine based off of an Optiplex can be pretty rewarding.
EDIT: I've come back to this video to put my Opti in an old ASUS gaming case I got, and I've been using this as a reference for how to get stuff to stop working. Soldering is necessary, but I've got power and HDD LED's now. And for anyone wiring power and getting errors, solder the red and yellow wires together. Stupid Dell, crappy failsafe right there.
This is the best video i have seen thus far.. can this also be done with the dell optiplex 9020 i5 sff 4th gen?
I don't know if you celebrate Thanksgiving in Australia but Happy Thanksgiving tomorrow or today their its really important to feel gratitude in your heart have a wonderful day.
Wow really good job!
It’s definitely fun to do this stuff. In 2019 I turned my 2014 HP Envy (GT 640 and i7 4770) into a gaming machine. I started with my older GTX 970 paired with a new i7 8700K, but since then its had parts swapped every now and again. Today it has a RTX 3060Ti paired with a i9 10850K running 5.1GHz.
@Michael's Productions Haha yeah it's a good experience.
I got a i7 4.5ghz with 24 gig ddr4 for free,only used for light work.with amd 2100 videocard but that one is going to be swapped with a 580.recently i bought already a gaming pc but this one i got for free is probably going to be faster.Also got another i5 free computer with 32 gig ddr3 going to upgrade that one to currently there is a 4890 (very old videocard)in it but thats going to be a 580 to.🤔still making sense of what im going to do with 7 pc,s
I recommend doing this to an Optiplex 3010, as it's much more easier (Don't get an SFF, else you need a PCIe extender cable and it comes with just two PCIe slots, x1 & x16 ) . Front IO header are standard, got the case front IO to work with the proprietary motherboard (with a few slight modifications on the connectors) , Front Audio works and the two front usb 2.0 works as well. The only problem is the fan error which only disappears if the fan is running. I didn't think about using extra jumpers on the power switch. Great tip on using those motherboard jumpers LOL.
There’s actually some pin outs online and a guide for Optiplex conversions. There’s a Reddit post as well stating which boards use the same IO assemblies, etc. I’ve built two 990 systems a couple years ago having picked up the boards for $10 each. The 790 and 990 are very similar even among the SFF models. Of course, the older Optiplex boards like the 380, 745 and 755 are fun to mess with as well because there are modded BIOS releases for them to use socket 771 Xeons. People dump on Optiplex, but I love using them. I have two 380 MT found on the curb for bulk trash pickup. I modded one, tricked it out with replacement fans and RGB, and then threw in a descent GPU to make a pretty good XP retro machine. One man’s trash is another man’s treasure 👍
Did this recently with an optiplex 3020 and an RX 570. Needed a 24-pin ATX to 8-pin Dell PSU adapter, but that was 14 Canadian bucks shipped. Got it sold within a day. These are a great option regardless of the GPU. An RX 550 will do you just fine for gaming on the cheap.
Holy shi I just bought a dell precision and a gtx 1050 ti for $220 on Craigslist and look who uploads while I’m making a list of things to buy to upgrade it 😂
Definitely my favorite kinds of vids! 👍 I’ve got a similar computer with a Xeon e3 1241v3 ($45 i7 4790) on a Lenovo m83 ($19) with 16gb of memory half of which I took out of a dell on the side of the road. It’s also got a gtx 770 but it’s a bottle neck unfortunately.
1241v3 can hold even 2060! for 50 dollars is amazing value
Yes, time for some Tech Yes loving.
a bit late but im working on an optiplex 9010 that im pretty much doing the same with except Ive been meaning to dabble with it for about a year now but i had other projects to do. the mother board is similar minus the 34-pins connector. if you want, before i get further into it, i can provide some details on it and you could make a video on it
Great stuff!
i got a dell precision t5500 with dual cpu and 32gb ram for free from my friend and i changed the internals to a phanteks p400s case i got used for 20€. works perfectly and had no issues except mounting the board as it is BTX
I plan on doing a weird reverse at some point. Use the Optiplex MT case, preferable the 4th Gen cases for the USB 3.0, to build a rig in. The tip about the forum helps me figure out the front I/O problem. All I need now is $1,200 that I specced and we golden 🤣🤣🤣
you can use an LED to short those pins to remove the error as well from my memory, if i remember correctly its because they wire an led in the switch..been a while but.. i do remember using jumper terminated led's to short these and similar boards from dell and hp.
to get around the fan error just jumper the speed signal wire from one fan header that is used by an actual fan to all fan headers that need to see a speed signal. the other pins aren't needed to be used just the speed signal pin jumped to any fan header that needs to see an rpm signal. temp signal bypass is simple as a resistor jumpered in place of the sensor to act as a bypass if not needed.
Another adapter that may be needed if the board came from a USFF (Ultra Small Form Factor) model would be a miniPCIe to PCIe x16 (or x4) as for the USFF models the spec sheet (for the Optiplex 790 & 990 for example) shows the only expansion slots is a microPCIe instead of a x16 (& x16 wired x4) of the larger form factor models.
Great video as always! Tho my Lenovo TC M17 works as it is, out of dumpster(with FullHD monitor btw) thru CPU/RAM change/slap-in a 1030 and voila! Enough for some GTAV/APEX.
For the selecting the boot order you need UEFI boot enabled, those small errors are easily skippable with F1 as none is critical, they're just for different peripherals that are connected, I think they're all able to be turned off in bios, I used to have an optiplex but older, I think it could be turned off
Regarding rewiring power button connector (at 8 min position in the video), you can connect Power LED of your new case to 3/4 and 5 pins of the MB power button connector (check the polarity).
I found the lenovo motherboards to be the best standardised oem boards. The only thing that needs an adapter is the usb 3 connector. You can work around the hd audio connector by removing a pin
Which pin are you removing to work around the audio connector?
You should check out the 7040's there are some good deals on ebay the sff Dell optiplex 7020's and 9020's are good but the small chassis limits upgrades a low profile graphics can can work though I would love to see you work on a 7040
Well I might now have a use for all the used Optiplexes that sit underneath my work desk
Nice build! Loving these videos - they stimulate the need for tinkering. Inspired by the Tech Yes man, I've been building some systems and flipping them (X58 is still ok cheap here
Checkout the Fire Pro S7000
Just an fyi to anyone looking for a super cheap lga 1155 motherboard, Look for the Dell MiH61R. These boards normally float between $15-20 but I find them all the time for only $10-12! It has a non-proprietary front panel pin layout for everything.
Budget parts are more interestng because its fun to try get the most performance you can for the least you can spend. Sometimes the results are interesting!
The goodwill by my house sells optiplexs. It’s called goodwill computer-works, they sell a lot of office pc stuff donated usually from cities and state offices. All you need is a hard drive thru don’t come with one, and they are all pretty new, I brought 5 of them with 16gb of ram and i7 4770 in them as well as one with a 4770k. The best 2 I got had a Xeon in from 2019 the i5 systems go for 19.99 i7 for 29.99 and the Xeon for 59.99
I have a Dell mobo too! If you want to bypass the error message (for servers purpose) just unplug the keyboard when booting up