ASUS TUF Gaming Fx505d 📌 PROPER WINDOWS 10 Installation
Вставка
- Опубліковано 2 жов 2021
- In this video i will show you how to INSTALL WINDOWS 10 PROPERLY for ASUS TUF Gaming Fx505d laptop STEP By STEP.
🔵 Windows 10 Pro CD KEY Original: www.cdkeyoffer.com/cko/UfixTe...
🔵 Windows 11 Pro CD KEY Original: www.cdkeyoffer.com/cko/UfixTe...
📢Create windows 10 USB Drive: • How to create Windows ...
👉 recommended drives:
🔵 amzn.to/2QitsVW
🔵 1TB SSD sata 2.5" : amzn.to/3A4oH4n
🔵 1TB M.2 NVME SSD: amzn.to/3lgkdkL
👉 Tools used:
✔The proper Teardown kit!: amzn.to/2CATV8e
✔Shop Towels Origina: amzn.to/2TFXF0O
✔Tweezer Set: amzn.to/2yvNjVV
✔Guitar Picks: amzn.to/2XJc6lT
✔Electric Screwdriver: amzn.to/2D0iGvq
✔Thermal Paste: amzn.to/34UZI2Q
✔Canned Air: amzn.to/2yzuNf9
✔Alcohol isopropilico: amzn.to/2KoKqil
✔THICK insulated jumper wire: amzn.to/2XL9GTF
✔Kapton tape: amzn.to/3ksJTJD
✔Freeze Spray: amzn.to/31DyAFQ
✔Conformal coating: amzn.to/3iqd12o
✔Air Duster : amzn.to/3AM9GUt
👉 Equipment Used:
✔Portable Soldering Iron: amzn.to/31zPipL
✔Air Duster: amzn.to/3iqjUke
✔Hakko Hot Air Station: amzn.to/2O1k0PX
✔Nozzle for hot air station: amzn.to/2D21XYM
✔Hakko Soldering Station: amzn.to/2PRrtCF
✔Hakko Air Filter: amzn.to/2O2zJyf
✔Microscope: amzn.to/2CDqyCb
✔Kester Solder: amzn.to/2D2Bl9R
👉 Diagnostic tools:
USB amp meter: amzn.to/3knyElX
USB-C amp meter: amzn.to/2CbaPMK
On-Screen multimeter: amzn.to/33MV5uP
CHEAP multimeter: amzn.to/2DBnERh
Bench PSU: amzn.to/3kwiyGs
👉 Ultrasonic Cleaning:
ALL Laptops & CELLPHONES: amzn.to/2XLBnvM
Branson EC cleaning fluid: amzn.to/3aaa6Il
🔵 Leave a tip for us via cryptocurrency / PayPal if it helped you out:
› PayPal: is.gd/SL4AoD
› Bitcoin:36KgkZraGcSJsGU6snZDfmFfX9piZj4aqv
› Ether (ETH):0x7554389ffaf349c8ad6b484e25e03bfd57da244a
› Litecoin (LTC):MUvuymvrgB3ENYY1Tn8H9A7QupbXa1kib5
› Bitcoin cash (BCH):pzt0clpwj9tm07qvsnksdnvwdskps8kkxv03q9h6w9
› TrueUSD (TUSD):0x7554389ffaf349c8ad6b484e25e03bfd57da244a
› BAT (BAT):0x7554389ffaf349c8ad6b484e25e03bfd57da244a
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
#laptopDIY #Laptopservice #laptopteardown #laptopupgrade #laptopreview #DIY #electronics #laptopRepair - Наука та технологія
I kind of like the ASUS BIOS.
Regarding the CMOS battery should it be replaced if you will going to upgrade anything in your laptop, let's say after 4 years?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you don't need to replace the Bios battery every 4 years or so, the motherboard does not even use the Bios battery at all unless the main laptop battery is completely drained then it will switch to bios battery to keep its configuration alive, and it can keep using the bios battery for 12-16months before its drained. so the conclusion is as long as you keep you battery with 2% of charge the bios battery will be all 100%, and lets say you forgot to charge it and it droped to 0% and left it there for 2months and then you just took 2month off the life of the bios battery and as soon as you plug the charger and start charging the internal battery the bios battery will stop draining. its a CR2032.
here is a video about the internal battery and in the video you can see the bios battery on the motherboard.
ua-cam.com/video/wWlQjg11mpU/v-deo.html
Seguí 3 de sus vídeos; cambiar disco duro, usb booteable y este. Mi equipo ya funciona, gracias 😭
excelente, me da gusto que te ayudo mis videos, como le comente, el dia que gustes puedes llevar su equipo para mantenimiento or servicio gratis. :)
Questions. When I opened my asus tuf gaming fx505d there was no mechanical hard drive. I put in a wd black 1tb and wd black sn770 ssd m.2. When I was reinstalling windows it asked if i wanted to use drice 0 or drive 1. I chose 1. Wouldn't I need to use both 1 and 2 since I upgraded 2 things? PLEASE HELP ME!!! thanks for all your help by the way. Your tutorials are amazing.
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: no when you installed a two drives 1tb WD black and a 1tb nvme, during the installation you want to select the m.2 1tb and so the windows gets installed on the m.2. the best method is this:
remove the 1tb sata or HDD , and only install the m.2 ssd and then install windows on that,a nd once the windows is installed then turn off the laptop and install the 2nd drive and that's all the windows will detect as 2nd storage. this way your windows will not have dependency to the 2nd drive.
If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.
Thanks! I installed the way you show in the video. I have a problem, I have no drivers installed, I cannot use wifi or LAN, neither the touchpad. It's the 1st time the laptop is being used. I tried to download and send it via a pendrive but after driver installation didn't work. Any ideas? Thanks in advance
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: Did you create windows 10 usb boot and installed it correctly? you sure? because with windows 10 in this laptops the wifi and lan are 100% should be recognized. something is not right my friend try formatting again make sur you have windows 10 usb drive
ua-cam.com/video/uDu8j2lE-dM/v-deo.html
@@uFixTek Hi man! Thanks for your fast answer. Could it be something in the bios? Or related that is the 1st time installation after factory?
I'll try again as you suggest! Thank you!. I hope it's not a fail in the laptop
nothing to do with bios or anything in the bios, even we get this laptops new, and open and replace the ssd or hdd and direct install windows (fresh install) and never ever had an issue like you mentioned. i been doing this for over 18years. if it was windows 7 or late i would understand but never on windows 10 and this laptop. double check usb or use a different usb
I followed your tutorial and I'm stuck because of error "required files not available" on my usb.
When do you encounter this error? At which step does it occur? Is it when you reach the partition section (hard drive selection)?
try booting from different usb ports, this is very common issue.
My usb is not recognized by bios. I tried with different 3 usd drive. Somehow its not detected by bios. Any idea?
how did you create the windows on your USB, what steps you took to create the bootable usb for the windows?
@@uFixTek im using to create bootable usd and copy window image (by rufus as well)
try different usb ports on laptop, it is normal that not all usb ports are detectable for boot.
i want to buy this kind of laptop and there's no window,this method will work? and if i do these what os is the best or you can suggest,windows 10 or 11,i hope you will reply thank,already subscribe to your channel
🫠Regarding your question, you can use this method i recommend windows 10 for now at least for next two years and after that you can install windows 11, because windows 11 still has bugs.
in the video description i linked how to create the windows 10 usb boot drive.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Hello, I followed this tutorial as well as upgraded my ram/storage (32 gb and a 1tb m.2) and now my 1050 IGPU is always at 0%. I updated all of my drivers and whatnot, and I have confirmed that it is not a hardware issue by achieving normal performance when plugged into an external monitor. Any ideas on how to fix this? My guess is it has something to do with windows 11.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, that is a windows 11 issue we do get that problem with our clients, we recommend you to stay on windows 10 for next two years and in that time windows 11 will and should be stable and issues fixed.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
@@uFixTek I've found a solution for you then. For some reason installing Nvidia drivers through GeForce experience isn't enough for this card, so you have to find the specific driver installer for the 1050m from the Nvidia website, as well as to update your integrated graphics through the device manager (under "display adapters"). Windows 11 also forces you to connect to a wifi network on startup, but you can bypass it by using the command line by hitting shift + F10, and typing "oobe\BypassNRO". Windows 11 is running perfectly on it
yes we always bypass the installation without internet "BypassNRO"
and the display adapter driver will resolve it for sometimes but then again in a month your will need to re install it because of the windows update that messes with the driver.
the update : KB5025224 , KB5028182, KB5028245
they said they placed a fix in those, but never fixed for all models.
hopefully in upcoming updates they resolve the issue, also we find it very annoying for the windows to stick it's nose in the other drivers without permissions :P
Is it safe to follow your steps if my 1TB HDD storage already has datas?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: sure ma man you can, and it ill work just fine if you need any help let me know.
ua-cam.com/video/uDu8j2lE-dM/v-deo.html
@@uFixTek I did.Your video was very helpful. keep up the good work G.
Awesome my friend :)
@@uFixTek is there any chance to loss my all data from my computer ?
I have a problem. It show me that I don’t have USB files or thing like that. But I followed your steps….
Thank you for your feedback! If you'd like to support the channel, you can like, subscribe, or do both!
Regarding your question, here are the answers:
To create the Windows 10 USB, I used the method shown in the video you provided: ua-cam.com/video/uDu8j2lE-dM/v-deo.html
When you boot from the USB, please provide more details about the step at which you encountered an error. You can use this website imgur.com/ to upload and send me the link to the screenshots. This will help me better understand the issue and provide you with a more accurate solution.
If you have any further questions or requests, feel free to ask!
I'm stuck on "Getting files ready for installation" at 0% for 30 mins now. What should I do?
the issue could be two thing the HDD is bad and has a pad sectors, or try installing windows using different USB port!, but mostly is because of the HDD has bad sectors.
@@uFixTek What does that mean? I need to buy new one? and I'm using SSD
@@uFixTek Another thing is I'm reinstalling windows because after I updated my device to win11, it only work for few minutes after opening then go blue screen and restart
yes your SSD is degraded and is not responding well, you will need to replace the SSD and install windows,
ua-cam.com/video/hIbpboHw0cQ/v-deo.html
this happens to our clients a lot when you download and erase a lot then the SSD will degrade.
U don't explain how ur UEFI settings have to be.
you don't need to change anything in you bios: its set on default as uefi, the only time you may want to change the uefi to legacy is if you have burned the usb stick via rufus to MBR mode then you need to change to legacy from UEFI. but if you have created the window boot usb via Microsoft media creator then its created as UEFI and all you need to do is plug in and power on and press f8 and choose your usb from drop down list. if you have upgraded the ssd to a brand new ssd then no need to press f8 as it will look for a bootable devise.
speak lound
I believe you need to increase the volume for the speakers, my friend. check your volume settings.