Hey! Maybe you can pin this to help some dudes with the wiring: You have to connect the following wires: Harley Wires / Wunderkind Wires Black = Mass / Black = Mass Red = Brake light / Red = Brake light Green = Indicator / Blue = Indicator White = Back light / Yellow = Back light Remember to remove fuse before you cut the wires (ignition on + remove red 40 AP fuse, then ignition off) If job is done, add fuse and then start ignition Ride always safe guys. (Sorry for my bad English)
Looking much better! Thanks for yet another quality video! I found it easier to remove the struts and slide the whole assembly off to get to that bolt on the inside when I removed the stock turn signals.
Bought these without realizing they are not compatible with US models. Lol I should’ve read into it more before purchasing. Your video just made them look so good I bought them right away xD
Looks so much better. Thanks for doing this video, mate. You should do a video of what tools to buy; what to tighten and how often; etc. For beginners like me. 🤟🏽
Love these indicators. I currently have the Custom Design Ring LED’s on my SB. I would need to relocate my plate. Thanks for another great review and ideas. Cheers 🍻
Not a worry man, glad you liked the vid 👍. In my opinion these are the best looking rear indocators you can buy for the softail street bob....... although they're a little pricey. The rear end of the street bob is quite narrow and requires small indicators to flow with the lines of the bike. These LEDs are alot brighter than the stock indicators too.
Thanks for sharing..they look pretty slick..I'm gunna check em out..They're actually a lot brighter than what I thought they'd be considering their so small..That was the only worry I had about changing mine on my lowrider S..Vision from behind..They look like they do the job👍
Nice video... Regarding the fender, i think you should of removed the 4 bolts that hold the struts... Not the fender itself, then with them out the bike disassemble the fender. 👍🏼🍻
Yo Gingybeard I love this look, very awesome video mate. I have the same stock rear lights on my Dyna and I'm loving this sleek look. I'm in NSW as well and I've been looking online every where for these. Where did you get them? Cheers dude. ;)
Hey mate I bought them directly from Wunderkind in Germany. Here's a link to them wunderkind-custom.com/en/motorcycle-accessories-shop-details/140/motorcycle-indicators/136/led-indicator-taillight-combination-2stripes-for-fender-
Thanks for the great video I would like them on my Softail slim . Always good to get some great ideas. All the best from Auckland NZ P.s put some masking tape on your guard before removal stops scratching
@@TheGingybeardMan We have All been there rush into it and not plan properly that's how we learn. Nothing better than working on your bike. Thanks again 😊
@@TheGingybeardMan True that brother I'm always working on my bike . That's the great thing about HD you can change anything you want. I've done bars twice,white wall tyres, exhaust,side plate, stage one, indicators next. Ride Free
This video is awesome. Thanks for sharing your experience. One short question. Is there something to do with the indicator frequency? Or do they match with the old ones? I heard a lot of can bus systems and indicator frequency + error coming up in the display. thanks dude!
The flash rate matches with the old indicator frequency. The only error which will occur is if you also install led indicators on the front as the front indicators on the stock street bob are globes instead of leds. The error will be fast blinking on the indicator panel unless you install load resistors.
Can you advise where you purchased the rear wunderkinds ? (I am in Queensland and ride an 18 slim) and perhaps also which load equaliser you would use for the late softails for the front blinkers Cheers
@@carstenvp I bought them directly from wunderkind in Germany. Just Google search the name. There is no need for load equalisers unless you also install led indicators on the front. The stock rear indicators are also leds so no need for resistors when changing them for the wunderkind indicators
🇬🇧👍🏻canny mod ;;your doing a great job with the street bob Any more tricks up your sleeve ❓having a beer in a wet north of England all the best Mark ✌🏻🍺🍺
Hey Mark, yeah mate I've still got a fair few mods I'd still like to do to the bike. Definitely going to have a torque cam installed in the future and some more cosmetic stuff. Have a beer for me mate 🍻
Having seen your install of the Wunderkind Turn Signals I went ahead and bought some too as they look awesome.. Would you be able to tell me what turn signal colour wires did you match up to the bikes colour wires?? Cheers Bud.
I'm doing the same on my 2018 streetbob (wunderkind and plate holder on the side), but I can't access to the two last torx screw inside the mudguard :'( I think I will remove everything, including the fender brackets 🤷 Thanx for your vidéos that I Always find really interesring.
Brilliant video, I was inspired to purchase the same ones which have just arrived. Do you remember what wire colours connected to which please? On the video it looks like black to black - red to red - white to yellow and that leaves blue to green but is that right please? Many thanks.
@The Gingybeard Man & @ Martin Hall - Hey i got a set of these indicators, the instructions that came with the pack are all in other languages.... No English - Do you guys recall which wires colours match?? Just want to get it right. Thanks in Advance
looks real good mate. I'm curious as to how far they stick out compared to the OEM docking hardware, i know there's measurements on their site, but with the indent should cut one or two millimeters? been sitting a bit can't decide between these and alloy art's 3-in-1's. cheers from Sweden.
Thanks man, appreciate it 👍 just click on this link to purchase them: wunderkind-custom.com/en/motorcycle-customizing-parts-webshop-start/195/motorcycle-rear-light
@@ninocuffaro5619 here's a link to them on the website. wunderkind-custom.com/en/motorcycle-accessories-shop-details/237/motorcycle-indicators-rear/136/led-indicator-taillight-combination-2stripes-for-fender-
wunderkind-custom.com/en/motorcycle-accessories-shop-details/140/indicators-light/136/indicator-taillight-combination-2stripes-for-wing scroll down this page and you will see them advertised for specific models 👍
@@motorsicknick2988 mate you don't actually have to disconnect the battery to wire the indicators just disconnect your current indicators at the connectors. Much easier than disconnecting the battery
From the wunderkind website here's a link. wunderkind-custom.com/en/motorcycle-accessories-shop-details/237/motorcycle-indicators-rear/136/led-indicator-taillight-combination-2stripes-for-fender-
Anyone could do what you covered without instructions, you didn’t cover the most important part the actual electrical layout etc… this is more of a how to lift your fender than light install
Hey! Maybe you can pin this to help some dudes with the wiring:
You have to connect the following wires:
Harley Wires / Wunderkind Wires
Black = Mass / Black = Mass
Red = Brake light / Red = Brake light
Green = Indicator / Blue = Indicator
White = Back light / Yellow = Back light
Remember to remove fuse before you cut the wires (ignition on + remove red 40 AP fuse, then ignition off)
If job is done, add fuse and then start ignition
Ride always safe guys.
(Sorry for my bad English)
Thanks for the details wiring guide.
I just unplugged the the lights without removing the fuse. What could happen if the fuse was not removed?
Looking much better! Thanks for yet another quality video!
I found it easier to remove the struts and slide the whole assembly off to get to that bolt on the inside when I removed the stock turn signals.
Thanks man. Good point with removing the struts, in hindsight I'd do the same brother 👍
Bought these without realizing they are not compatible with US models. Lol I should’ve read into it more before purchasing. Your video just made them look so good I bought them right away xD
Probably the best turn signal lights.
Looks so much better. Thanks for doing this video, mate.
You should do a video of what tools to buy; what to tighten and how often; etc. For beginners like me. 🤟🏽
Thanks mate, appreciate it 🤙
Nice installation bro and they look hella bright too
Thanks bruv, I'm very happy with em 🤙
Love these indicators. I currently have the Custom Design Ring LED’s on my SB. I would need to relocate my plate. Thanks for another great review and ideas. Cheers 🍻
Not a worry man, glad you liked the vid 👍. In my opinion these are the best looking rear indocators you can buy for the softail street bob....... although they're a little pricey.
The rear end of the street bob is quite narrow and requires small indicators to flow with the lines of the bike. These LEDs are alot brighter than the stock indicators too.
Thanks for sharing..they look pretty slick..I'm gunna check em out..They're actually a lot brighter than what I thought they'd be considering their so small..That was the only worry I had about changing mine on my lowrider S..Vision from behind..They look like they do the job👍
Yeah mate they're a fair bit brighter than the stock ones and look heaps more clean 🤙
Nice video...
Regarding the fender, i think you should of removed the 4 bolts that hold the struts... Not the fender itself, then with them out the bike disassemble the fender. 👍🏼🍻
Looks way better man 🤙🤙 great vid keep it up 👍👍🇳🇿🇳🇿
Thanks mate, I'm really happy with them 🤙
Looks fantastic!
Cheers mate
Night and day mate!
I took my rear wheel off and did it that way. No fender removal
👤💥.. NOICE !! Lol 👍🏼 came out really good ... I will have to look into getting me a set also... 👌🏽
Thanks man, they're way brighter than stock to
I got German instructions with mine, trying to find English ones, I tried to freeze frame your install but can’t tell what’s what
Hey brother what website did you buy those from? They don’t seem to ship to Aussie/NZ on the actual Wunderkind website
Nice!
Yo Gingybeard I love this look, very awesome video mate. I have the same stock rear lights on my Dyna and I'm loving this sleek look. I'm in NSW as well and I've been looking online every where for these. Where did you get them? Cheers dude. ;)
Hey mate I bought them directly from Wunderkind in Germany. Here's a link to them
wunderkind-custom.com/en/motorcycle-accessories-shop-details/140/motorcycle-indicators/136/led-indicator-taillight-combination-2stripes-for-fender-
Thanks for the great video I would like them on my Softail slim . Always good to get some great ideas.
All the best from Auckland NZ
P.s put some masking tape on your guard before removal stops scratching
Thanks mate 🤙🤙🤙
No doubt I really should have thought about it and wacked some tape on the guard 👍
@@TheGingybeardMan
We have All been there rush into it and not plan properly that's how we learn.
Nothing better than working on your bike.
Thanks again 😊
@@davemagee no doubt, live and learn.
I find half the fun in owning a bike is working on it and making it your own 👍
@@TheGingybeardMan
True that brother I'm always working on my bike .
That's the great thing about HD you can change anything you want.
I've done bars twice,white wall tyres, exhaust,side plate, stage one, indicators next.
Ride Free
Look great!
Thanks man 👍
tidys the arse end up quite nicely , i took mine off and replced them with l e d taillight with built inindicaters, i
I love the way the back end looks now its heaps more sleek 🤙these led indicators are super bright too 👍
💯
This video is awesome. Thanks for sharing your experience. One short question. Is there something to do with the indicator frequency? Or do they match with the old ones? I heard a lot of can bus systems and indicator frequency + error coming up in the display. thanks dude!
The flash rate matches with the old indicator frequency. The only error which will occur is if you also install led indicators on the front as the front indicators on the stock street bob are globes instead of leds. The error will be fast blinking on the indicator panel unless you install load resistors.
@@TheGingybeardMan thank you so much!
Can you advise where you purchased the rear wunderkinds ? (I am in Queensland and ride an 18 slim) and perhaps also which load equaliser you would use for the late softails for the front blinkers
Cheers
@@carstenvp I bought them directly from wunderkind in Germany. Just Google search the name. There is no need for load equalisers unless you also install led indicators on the front. The stock rear indicators are also leds so no need for resistors when changing them for the wunderkind indicators
Great vid
Thanks man 👍
🇬🇧👍🏻canny mod ;;your doing a great job with the street bob
Any more tricks up your sleeve ❓having a beer in a wet north of
England all the best Mark ✌🏻🍺🍺
Hey Mark, yeah mate I've still got a fair few mods I'd still like to do to the bike. Definitely going to have a torque cam installed in the future and some more cosmetic stuff. Have a beer for me mate 🍻
The Gingybeard Man
Been on it the nite after work
✌🏻🍺🍺🍺canny take care
Having seen your install of the Wunderkind Turn Signals I went ahead and bought some too as they look awesome.. Would you be able to tell me what turn signal colour wires did you match up to the bikes colour wires?? Cheers Bud.
I'm doing the same on my 2018 streetbob (wunderkind and plate holder on the side), but I can't access to the two last torx screw inside the mudguard :'(
I think I will remove everything, including the fender brackets 🤷
Thanx for your vidéos that I Always find really interesring.
In hindsight the best way to access the inside fender torx bolts is by removing the fender struts which hold the fender 👍
Brilliant video, I was inspired to purchase the same ones which have just arrived. Do you remember what wire colours connected to which please? On the video it looks like black to black - red to red - white to yellow and that leaves blue to green but is that right please? Many thanks.
@The Gingybeard Man & @ Martin Hall - Hey i got a set of these indicators, the instructions that came with the pack are all in other languages.... No English - Do you guys recall which wires colours match?? Just want to get it right. Thanks in Advance
Hey Dude,
Is the wiring „color on color“, or is there is there a switch?
Nice work!
Great vid thanks for the info!! How are you liking them so far?? 👍😘
hello.. Nice lights .!!! what kind of decal did you use on the gas tank
I made the decals myself with a cricut machine and adhesive vinyl
Rear strut lights are way better..all in one ..well hidden.. looks way better..
Thanks mate, I like how subtle they are but they're also super bright.
Looks great, I'm about to pull the trigger on a set for my Fat Bob. Do they come with a diagram for the wiring colours?
No mate it didn't come with instructions to match the wires. It was a case of trail and error. I really should have filmed which wires go to which.
Would this lights in the way of leatherpro bags?
Like the number plate holder where’s it from ?
I've done a video of the number plate bracket install on my channel. Its the curved radius number plate bracket by custom dynamics.
looks real good mate. I'm curious as to how far they stick out compared to the OEM docking hardware, i know there's measurements on their site, but with the indent should cut one or two millimeters? been sitting a bit can't decide between these and alloy art's 3-in-1's. cheers from Sweden.
Thanks mate they stick out 25mm from the indent on the feder strut. Im very happy with how they look 👍
Great Video but why didn‘t just take the whole fender off?
In hindsight I definantly would take off the whole rear fender 👍
They look damn good! But $340?!
Yeah mate, they ain't cheap. But they are quality and I havnt seen man 3 in 1 indicators less that $300.00
And we thought Harley parts are a rip-off, these are genuinely a rip-off at that price, but if you really want them wait till there's a sale.
What’s kind of license plate mount is that and where did you get it? I want to put the same in my bike to
Its a custom dynamics number plate bracket. I've done an install vid of it which is on my channel
Nice... 🤙 Got details on where to buy them? Great channel mate.
Thanks man, appreciate it 👍 just click on this link to purchase them:
wunderkind-custom.com/en/motorcycle-customizing-parts-webshop-start/195/motorcycle-rear-light
@@TheGingybeardMan cheers mate.
Love these lights. Would they fit a 2013 dyna street Bob would you know ? There arent any in the fitment on their website.
Cheers mate
Are the wunderkind 3 in 1 indicators available in the USA?
They're from a German company who post worldwide.
Howzit Beardy man, these look schweeet. Did you order part number 106611-F15 softail models 2018 onwards? Cheers and keep the vids coming.
Hey man thanks for following the channel 🤙🤙🤙
yep that's the correct part number for the 3 in 1 indicators I went with 👍
@@TheGingybeardMan Order in cheers bud
Sorry to trouble you again buddy, could you help with which wire goes where or is it explained in the instructions? They arrive this week. Cheers.
@@caapstad hey mate I cnt remember off the top of my head, but I believe the kit comes with instructions 👍
Could you tell me which model is the turn signal? Good Video
Sorry I dnt understand when you refer to "model"
@@TheGingybeardMan back turn signal product numbers
@@ninocuffaro5619 here's a link to them on the website.
wunderkind-custom.com/en/motorcycle-accessories-shop-details/237/motorcycle-indicators-rear/136/led-indicator-taillight-combination-2stripes-for-fender-
@@TheGingybeardMan Thank you for the informations.
That's what I'm talking about,,how do I or find them
wunderkind-custom.com/en/motorcycle-accessories-shop-details/140/indicators-light/136/indicator-taillight-combination-2stripes-for-wing scroll down this page and you will see them advertised for specific models 👍
You're bike looks so damn cool.
Btw price of the indicators
Thanks mate, they were 184 Euro or $300.00 Au
Mate where did you buy them from?
Directly from the wunderkind website mate, just google softail streetbob wunderkind indicators and the website will pop up 👍
very nice! Do you disconnect the battery to install those indicators?
Yes sir disconnect the battery so the wiring doesn't earth out 👍
@@TheGingybeardManhello, sorry but what do you mean with earth out, my english terms arent that good. Thanks in avance!
@@motorsicknick2988 mate you don't actually have to disconnect the battery to wire the indicators just disconnect your current indicators at the connectors. Much easier than disconnecting the battery
Thanks for your fast reply! Tbh i installed them without disconnecting, is that a big issue?
Did you need to add a load balancer?
No need for just the rear indicators as the stock indicators are also leds. If you also install led indicators on the front you will need resistors
Where you get these from 😍
From the wunderkind website here's a link. wunderkind-custom.com/en/motorcycle-accessories-shop-details/237/motorcycle-indicators-rear/136/led-indicator-taillight-combination-2stripes-for-fender-
Didn’t have to disconnect the battery or main fuse?
Sure do I didn't film it
The Gingybeard Man was it hard to get to the negative? I’m about to do this once I get mine in
@@bobhog3969 hey man I followed this vid ua-cam.com/video/v46lis2gGho/v-deo.html
didnt you have to fit resistors
Nope the Led wiring already has resistors built in
S
I
C
K
!
wunderkind means wonderchild
Did you need to add resistors when installing these rear lights?
No but resistors are already inbuilt in the wiring for these indicators. Regardless the stock rear indicators are leds
Anyone could do what you covered without instructions, you didn’t cover the most important part the actual electrical layout etc… this is more of a how to lift your fender than light install
The idea was to show the process along with the before and after comparison. Anyone can also check the manufacturers instructions on wiring 👍
It looks so easy, thank you very much. I´ll try it at my 2008 Fat Bob😎😎😎😎😎
Nice 👍🏽