Interested in grabbing this and the block offs in textured black if you’re still doing them. Seeing 2 different emails in the comments and the paypal link doesnt give any options
Yeah! Still selling them. Email is gifty74@comcast.net. Email me there and I’ll get you hooked up. Should be able to get them out early next week. USPS takes 2-3 days.
Super interested in grabbing one of these from you, my only concern is how visible are they? I feel like the riser would block most of the gauge? Thanks in advance!
I don’t have one so can’t test. But I can send you one with some very light scratches (shipping from vendor before they started packing individually) and you can try it out? Email me at gifty74@comcast.net and we can work something out.
Hi, I’m thinking about doing this and then getting my whole tank custom re-sprayed, can I just dremmel off the bracket that sticks up from the tank easy enough do you know? Also what’s shipping to the U.K.? Cheers 👍🏼
Hi! Yes, I think cut off the bracket and sand it down and paint is what some do. Shipping to UK is around $40 I believe. I could do $140 shipped for the bezel in powder coated black, and $175 with a blockoff plate for the gauges.
@@mikew2054 just email me at gifste74@gmail.com and I’ll send you a PayPal link. You pay and I’ll ship within a few days. Just sent one to Australia last week.
Hey. I have 5” risers and no extension needed. The risers height actually isn’t a factor because the wire gets routed up front, not into or around the riser.
Yes! Here is a link for the bezel & blockoff. $165 shipped. I have the bezels in gloss & textured black powder coat, and the blockoffs in textured only. paypal.me/gifty74/165
@@jameswatkins2752 saw some pics, yeah. Looks like on bars? At least we’ll maybe have an option to buy a console that is slim with no holes for the tank
Can you send me a few pics? Does the stock plastic piece fit in front of the fairing? My bezel is same as the stock piece. I’ve been asked before, but don’t have a way to test it.
@Gifty74 I'm not near my bike next few weeks but will look through my pictures and see what I have that may show it. I did remount the stock plastic half moon shape piece behind the road warrior , Memphis shades
@@bkress9638 I just received a new order, ready to ship out as soon as tomorrow. If you email me I can send you some pics of the block offs, but they're very basic. Just a flat piece of steel powder coated, to cover the holes. Email is gifty74@comcast.net
Hi! Yes, still making them, have both textured & gloss black powder coated bezel plates available. Didn't see your email yet, can send to gifty74@comcast.net. Thanks!
Installed mine yesterday, and used a MyMachinist gauge block off plate. Great gauge mount. Instructions are spot on in this video!
Wow, thanks! Wish you could post pics in replies!
Looks fantastic
Can you add a picture of the block off plates installed? Thanks in advance!!
Not sure how to do this. But, if you email me at gifty74@comcast.net I’ll send you a pic with the block off installed on the bike!
Looks great......nice job
Thanks 👍
Good
Great vid.
Where did you source the blanking grommet for top if frame?.
Hi. I just used the stock one that was in that location and cut it from the wiring, and then just reused it to plug the hole.
Do you make with one opening in the middle of it for just the Speedometer?
I do not have one 'in stock', but could pretty easily design it up and make a one-off. Probably would cost about $135 shipped.
Very nice job! Will those work with the dyna version? I have and FXDLS and plan to do this modification!
I don’t know for sure, but I can send you one to try and if it fits you can pay then, if not, you can send back
Interested in grabbing this and the block offs in textured black if you’re still doing them. Seeing 2 different emails in the comments and the paypal link doesnt give any options
Yeah! Still selling them. Email is gifty74@comcast.net. Email me there and I’ll get you hooked up. Should be able to get them out early next week. USPS takes 2-3 days.
Hey there are you still making these ?
If so will you send to Australia ???
Cheers 👍
Still making yes! Email me your address at gifste74@gmail.com and I’ll get you a quote. I think it’s usually $25-$30 shipping to AUS
I have emailed you today .
Cheers 🍻 Buddy 👍👍👍
@@angusterrasson5480 did you end up getting them and fitting it all up?
Super interested in grabbing one of these from you, my only concern is how visible are they? I feel like the riser would block most of the gauge? Thanks in advance!
I have the 5.5” risers (2” more than stock) and I get almost full view. Stock risers should give full view. Have them ready to ship!
@@gifty7464 sorry for the delay in response but absolutely! I’d love to get one of these from you
@@d00dz45 Sweet! Just email me at gifty74@comcast.net and I'll send you a Paypal invoice!
Super cool. Are you still making them? And shipping to the US?
Yes sir! Have the bezel in gloss & textured black powder coat. Email gifste74@gmail.com. $115 shipped.
Great. I'll write you an email.
@@gifty7464
Are the gauges on the FXLRS 4” diameter? Thank you kindly
The holes for the gauges I went with 3.630"
Hi. Are you still selling shipping? I am interested in the relo bezel and blockoffs. Thanks!
Sure am! Email me at gifste74@gmail.com and I’ll send you the details. Shipped 2 last week.
Any updates on if this fits behind the Memphis shades fairing?
I don’t have one so can’t test. But I can send you one with some very light scratches (shipping from vendor before they started packing individually) and you can try it out? Email me at gifty74@comcast.net and we can work something out.
Apparently it does work with the Road Warrior fairing! Someone in forums just posted a pic showing it fitting.
Hi, I’m thinking about doing this and then getting my whole tank custom re-sprayed, can I just dremmel off the bracket that sticks up from the tank easy enough do you know? Also what’s shipping to the U.K.? Cheers 👍🏼
Hi! Yes, I think cut off the bracket and sand it down and paint is what some do. Shipping to UK is around $40 I believe. I could do $140 shipped for the bezel in powder coated black, and $175 with a blockoff plate for the gauges.
@@gifty7464 ok great thanks, I think I’ll just for for the mount for the gauges. How do I place an order? Thanks
@@mikew2054 just email me at gifste74@gmail.com and I’ll send you a PayPal link. You pay and I’ll ship within a few days. Just sent one to Australia last week.
Hello. Did you have to replace the cables with longer ones? assuming a new riser 5 "
Hey. I have 5” risers and no extension needed. The risers height actually isn’t a factor because the wire gets routed up front, not into or around the riser.
@@gifty7464 clutch cable and brake hose no extension is needed?
For 5” risers, no.
Have you made the block out plate(s) yet?
Ordering some next week. Will probably make those as a simple oval plate in textured black powder coat.
Block off plates in textured powder coat, and another round of relocation bezels will be available to ship first week of January!
Do you still have the link?
@@gifty7464 ok just placed the order thanks
@@themann713281 cool! Yep, got it. Order is placed with the supplier, I’ll keep you posted on when I’ll receive and ship to you. Thx again.
Do you have a link for your bezel
Can I still order this and mail to the uk
Hi! Yes, shipping is pretty crazy, but I can send it USPS. Email me at gifty74@comcast.net for details and a Paypal link. Still making them yes!
Hey ,can you ship kit to Australia
Think so! I’ll get it quoted for shipping.
I’m in Australia too .
How did you get on with it ?
Cheers 👍
Hey! Sent one over there a few weeks ago. Think it was about $30 in shipping.
Would this work if u had the new quarter fairing?
I’ve been asked before, and not sure actually. I’d like to know. Can you send me some pics of the area where it would fit?
I want to order both, have a link for that?
Yes! Here is a link for the bezel & blockoff. $165 shipped. I have the bezels in gloss & textured black powder coat, and the blockoffs in textured only.
paypal.me/gifty74/165
@@gifty7464 awesome, thank you! got my order in
Can the bezel be used (gauge visibility) with the stock risers/handlebars?
Yes it can. I have 5.5” risers (stock are 4”) and I can pretty much see both gauges in full. I’m 5’11”, stock seat.
I'm not that tall. I'm concerned about seeing the fuel gauge, etc. I've been looking at maybe getting some stock (or there about) height pullbacks.
@@gifty7464 Hey. Not sure if you've seen them yet, but guess where the gauges are located on the '22 Low Riders?
@@jameswatkins2752 saw some pics, yeah. Looks like on bars? At least we’ll maybe have an option to buy a console that is slim with no holes for the tank
Will this work with a Memphis shades fairing, I'd love to have one
Can you send me a few pics? Does the stock plastic piece fit in front of the fairing? My bezel is same as the stock piece. I’ve been asked before, but don’t have a way to test it.
@Gifty74 I'm not near my bike next few weeks but will look through my pictures and see what I have that may show it. I did remount the stock plastic half moon shape piece behind the road warrior , Memphis shades
How can I send you the pictures.?
Ah, good point. Email me at gifty74@comcast.net. I have a few with some shipping rub marks. Can send you one as a trial.
@Gifty74 will do
Also check ua-cam.com/users/shorts5C5rMIMFHtM?feature=share
Where did you get the kit from?
I designed and had them made for me, to sell. I'm still selling them, $115 shipped in gloss black powder coat.
what risers are those?
Basic 5.5” just to give it a little pullback.
@@gifty7464 how does the brake line and clutch cable feel? is there enough slack? i was thinking doing the same thing on my 22 lowrider
Are these still available?
Yes they are! Got your payment overnight. Thanks! I’ll be getting it out early this week.
Are you still making these?
Yes! Let me know what you need.
What's the turn around time looking for gauge relocation. Do you have any pics of the block off plates?
@@bkress9638 I just received a new order, ready to ship out as soon as tomorrow. If you email me I can send you some pics of the block offs, but they're very basic. Just a flat piece of steel powder coated, to cover the holes. Email is gifty74@comcast.net
Hey man! Awesome video. Just sent you an email if you are still making these interested I. Purchasing
Hi! Yes, still making them, have both textured & gloss black powder coated bezel plates available. Didn't see your email yet, can send to gifty74@comcast.net. Thanks!
@@gifty7464 yes Ive sent it. I'll send it again!
@Gifty74 check your junk mail too. Lmk what process you usually take for buyers to purchase your item. Thanks
@@jkengine02 I did get your email and replied. Did you receive?
@Gifty74 I did but I responded again asking for the link and did not get a respond yet!
Gifty74 do you have an Instagram ?
No, not currently