Great video. I just installed these this evening. It took 15 minutes from start to finish. Your instructions are spot on! I installed these on a 2022 4Runner.
Thanks for making this video, man. Of all the raptor install videos yours is the one that finally solved my low-beam switch activation problem. Worked perfects on my 2021 TRD Off-Road Premium Predator. Thank you!
Hey man thanks a lot for making these. you should make more 4runner content. I love that color on your car. Do you know which Fuse i should use if I want to the raptor lights to come on at Ignition instead of Low beam headlights being turned on?
Great video. A very helpful step by step installation. I finally decided to put a raptor light on wifey's '20 Venture... How's the bracket holding-on now? Aside from Seven Sparta Raptor Light, would a different brand of Raptor light (same spec of the Seven Sparta) fit with the bracket?
I was just watching some videos on the correct way to install a "add a fuse". Most people are installing incorrectly, just like in your video because you can't put the wire leading out of the "add a fuse" facing the left side (where it belongs) there is not enough room. The powered female connector on the block, is on the right side and so is the wire on the "add a fuse", which means your not adding a fuse, your tapping directly into the power side and not actually running the power through the fuse. I have not found one that will accomdate this issue, I thought about adding an additional in line fuse (just in case). Watch the you tube video on correctly installing a "add a fuse" and youll see what im saying. If someone ever does short to ground could be a major issue.
Just traded my '12 Ram for a '21 Venture this weekend.. I modded a lot of lights onto the Ram and am really loving your final look here! Excellent tutorial video! 👍 One question though... I prefer (at least I did on my Ram) accessory lights like these to activate with the parking lights. If I install as you did, these will activate with the low beams - which are what activate as the DRLs in my '21 Venture (I think). I prefer to drive with my DRLs all the time. So, please correct me if I'm wrong, if I'm understanding this right... I turn my rig on and have my DRLs on, then my low beams are activated and these grille lights activate as well. Then, if/when I activate my headlights (not just DRLs but the headlight selection that activates my taillights) these will stay on as well. ?? Basically, these grille lights will be active ANY time the low beams are activated. I do apologize for being a bit long winded (and perhaps a tad repetitive), however I like to think every aspect through and ensure I understand what my final end result will be before I tackle a project like this. I really appreciate your video and your reply/confirmation!
@@MtnTownDetail is there a way for the lights to come on when the switch is set to DRL? would want them on in this mode since this is what i normally use when driving.
Great video I’ve been going through a bunch of ideas on how to put lights on my Venture. I ended up ordering the brackets before I finished watching the video. Lol.
The video is great but the bezels are expensive for what they are, plastic, but they fit into my 2022 4RUNNER TRD Off Road grill as advertised and they look good.
Awesome video! Just ordered my lights and bezels from Ed at 3bMakers. I plan to stay away from the in INJ fuse because that affects the fuel injector and will most likely use your recommendation since I run with my DRL’s all the time. My question is, if I tap the low beam and turn on my headlights will the raptor lights remain on? Thank you for your guidance in advance and great content!
Hi there, thank you for the video. I just got a set for my SR5. They are DOOD ( don’t know what this means). There are no instructions included but I have a question to see if you can help me. I got the 4 lights, the wiring hardness and 2 pcs add-a-fuse. First of all why 2 add a fuse pcs? And second, the fuse is # 15 instead of # 10?? Thank you for your help GG
Great video! I wanted the lights to be on all the time, so I tried runing this in the "INJ" fuse location - that fuse is hot all the time that the ignition is on - and it works, but the problem is that the fuse box lid won't close with it in that location! I guess you could always wire it to the fuse box inside the cab and use the INJ fuse there? Wish that SevenSparta offered these in the "blacked out" amber lens, and I wish someone would make a fuse box lid for the 2020+ 4Runners that would accept the add-a-fuse taps in any location!
Hi Bro, thank you so much for the video that you posted.. it really help & educate me a lot for installing raptor lights to a specific model.. i have a 2020 limited. And i am planning to install also. By the way is the brackets included when I order the amber lights? I click uour llink through amazon but it doesn’t show up the brackets..again thanks alot for the video.👍👍👋👋👋
Can I purchase a set that comes with the bezels shown in your vid? Your description indicates that they are purchased through easy? Can you share a link for the complete set including those bezels? Thanks much.
Thank goodness I didn’t order them yet!.. I have the sr5 premium and the grill is that one you have. Most raptor lighting don’t have those brackets or option to select them
@@martinpicon757the 10amp accessories in the engine fuse box my man. The lights came with an adapter to put an extra fuse. The lid of the fuse box wont close properly so I just ziptied the clips and it has been a while without any problems
For some reason when I used the low beam fuse it gave power to the raptor lights nonstop….with the car off and everything..so I used the “INJ” fuse and it works properly by only coming whenever the car is running….sucks cuz I did want to have it come off if I turned all lights off but the deal fuse also did the same thing as the low beam
How did you get the fuse box lid to close with the add-a-fuse in the INJ location? That's actually the one I *want* it to use to be able to have them on whenever the ignition is on? In my 2020 the lid won't close at ALL with the add-a-fuse in the INJ location...
Any problems with these 2 years later? My 2022 4runner starting throwing a “brake override malfunction”. Comes to find out something is burning a fuse and causing this. Took it to the dealer and they said it could be the raptor lights causing it.
Hi, can someone please let me know if this will fit my 2021 Toyota 4Runner sR5? It’s because I bought a pair one day and they didn’t fit the holes were too big that’s why I wanna know if this one’s fit so I could buy them for my 2021 Toyota 4Runner sR5. Thank you 🙏
@@MtnTownDetail there is a little hole on the Frame where you insert the cable I was just wondering if that area gets hot I don’t want to melt my cord thank you 🙏 the raptor lights are beautiful. Love your channel and your beautiful Toyota 4Runner and the tundra.
Thanks for the simple and thorough demo - Great Job! Off to install mine on a 2023 4Runner SR5 Premium (XP) X-series. 😊👍
Great video. I just installed these this evening. It took 15 minutes from start to finish. Your instructions are spot on! I installed these on a 2022 4Runner.
Hi, did you put the cord into the hole 🕳️ like he did?
Did you also buy the bezels?
@@michaeljon1116 yes I did and I love ❤️ them thank you
I have difficulty finding the right fuse. Can you show a picture or exact location please?
Thanks for making this video, man. Of all the raptor install videos yours is the one that finally solved my low-beam switch activation problem. Worked perfects on my 2021 TRD Off-Road Premium Predator. Thank you!
Thanks man! This was my 3rd install in a 2021 Toyota so I’ve got it down lol.
Can you provide a link to where I can buy these exact lights? I have a 2021 TRD premium with the chrome bar in the top grill. Thanks
Thanks for the video! followed it step by step and made the install super easy
No problem! Thank you!
Hey man thanks a lot for making these. you should make more 4runner content. I love that color on your car. Do you know which Fuse i should use if I want to the raptor lights to come on at Ignition instead of Low beam headlights being turned on?
Dude…thank you sooo much! You made it very easy for a guy who had trouble changing a light bulb…lol
Great video. A very helpful step by step installation. I finally decided to put a raptor light on wifey's '20 Venture... How's the bracket holding-on now? Aside from Seven Sparta Raptor Light, would a different brand of Raptor light (same spec of the Seven Sparta) fit with the bracket?
Thanks for the Vid, installed it on 2021 TRD Off-Road Premium watched your video a couple of times and done.....thanks again keep it up.
Much appreciated!
I was just watching some videos on the correct way to install a "add a fuse". Most people are installing incorrectly, just like in your video because you can't put the wire leading out of the "add a fuse" facing the left side (where it belongs) there is not enough room. The powered female connector on the block, is on the right side and so is the wire on the "add a fuse", which means your not adding a fuse, your tapping directly into the power side and not actually running the power through the fuse. I have not found one that will accomdate this issue, I thought about adding an additional in line fuse (just in case). Watch the you tube video on correctly installing a "add a fuse" and youll see what im saying. If someone ever does short to ground could be a major issue.
Great walkthrough video! Thanks for putting this together and posting it online!
Nice vid! I got a 21 also and I immediately covered those chrome strips.
I actually don’t mind them that much
Just traded my '12 Ram for a '21 Venture this weekend.. I modded a lot of lights onto the Ram and am really loving your final look here! Excellent tutorial video! 👍
One question though... I prefer (at least I did on my Ram) accessory lights like these to activate with the parking lights.
If I install as you did, these will activate with the low beams - which are what activate as the DRLs in my '21 Venture (I think).
I prefer to drive with my DRLs all the time. So, please correct me if I'm wrong, if I'm understanding this right...
I turn my rig on and have my DRLs on, then my low beams are activated and these grille lights activate as well.
Then, if/when I activate my headlights (not just DRLs but the headlight selection that activates my taillights) these will stay on as well. ??
Basically, these grille lights will be active ANY time the low beams are activated.
I do apologize for being a bit long winded (and perhaps a tad repetitive), however I like to think every aspect through and ensure I understand what my final end result will be before I tackle a project like this. I really appreciate your video and your reply/confirmation!
Correct
@@MtnTownDetail is there a way for the lights to come on when the switch is set to DRL? would want them on in this mode since this is what i normally use when driving.
Great video I’ve been going through a bunch of ideas on how to put lights on my Venture. I ended up ordering the brackets before I finished watching the video. Lol.
So awesome!
The video is great but the bezels are expensive for what they are, plastic, but they fit into my 2022 4RUNNER TRD Off Road grill as advertised and they look good.
Just installed yesterday. Works great. Thx for the video
Awesome video! Just ordered my lights and bezels from Ed at 3bMakers. I plan to stay away from the in INJ fuse because that affects the fuel injector and will most likely use your recommendation since I run with my DRL’s all the time. My question is, if I tap the low beam and turn on my headlights will the raptor lights remain on? Thank you for your guidance in advance and great content!
Tap into the low and they will act the same as your low
Thank you Sir, this video really helped me find the correct fuse
Nice vid! If you decide to convert the grill to a pro later down the road will these lights still work? Thanks a ton!
They will not unfortunately
New to all of this...if the lights are wired to the low-beam fuse, does that mean that they'll cut off when the high-beams are activated?
Hi there, thank you for the video. I just got a set for my SR5. They are DOOD ( don’t know what this means). There are no instructions included but I have a question to see if you can help me. I got the 4 lights, the wiring hardness and 2 pcs add-a-fuse. First of all why 2 add a fuse pcs? And second, the fuse is # 15 instead of # 10??
Thank you for your help
GG
Hey, did you end up getting any answers for your questions?
@@jeffboulet3616 hello, nope, no answer.
Just ordered thanks for video 👍
Awesome!
Great video! I wanted the lights to be on all the time, so I tried runing this in the "INJ" fuse location - that fuse is hot all the time that the ignition is on - and it works, but the problem is that the fuse box lid won't close with it in that location! I guess you could always wire it to the fuse box inside the cab and use the INJ fuse there? Wish that SevenSparta offered these in the "blacked out" amber lens, and I wish someone would make a fuse box lid for the 2020+ 4Runners that would accept the add-a-fuse taps in any location!
Just cut a little square on the fuse box and run the cable thru it.
Hi Bro, thank you so much for the video that you posted.. it really help & educate me a lot for installing raptor lights to a specific model.. i have a 2020 limited. And i am planning to install also. By the way is the brackets included when I order the amber lights? I click uour llink through amazon but it doesn’t show up the brackets..again thanks alot for the video.👍👍👋👋👋
You need to get the brackets on Etsy. @3bmakers
Ok copy that.. thanks again bro.. unlucky they dont have any stock gor the brackets. 😩✌️. Do you know other company that i can purchase? Tnx
Link to the lights and brackets that you used please ? Amazon ???
Where can I order the 3B Makers bracket?
Why are the Sparta lights listed for a 2016-2018 Tacoma? Do I need those lights to fit into these brackets or should I buy the 4Runner ones??
Buy the ones I linked in the description. Those are the ones you want. 👍🏼
The bezels are made for the 4Runner specifically and to use those Tacoma lights with them.
Can I purchase a set that comes with the bezels shown in your vid? Your description indicates that they are purchased through easy? Can you share a link for the complete set including those bezels? Thanks much.
Thank goodness I didn’t order them yet!.. I have the sr5 premium and the grill is that one you have. Most raptor lighting don’t have those brackets or option to select them
This is definitely the way to go.
Does it work on my 2021 4Runner Trail Edition please give me the link to order thank you very much.
Yes it does. Link in description
Thank you so much for this. I have a 21' venture this is perfect!
which fuse did you tap into if you don't mind me asking?
@@martinpicon757the 10amp accessories in the engine fuse box my man. The lights came with an adapter to put an extra fuse. The lid of the fuse box wont close properly so I just ziptied the clips and it has been a while without any problems
@@martinpicon757I changed out the grille to the pro grille tho, not using these pockets no more
Can we install 2 raptor light? Does it will over 10amp? The second one can we plug in to low beam as well
I’m sure you can.
Will the 3bMaker brackets fit a 2020 Toyota SR5 extended cab?
For some reason when I used the low beam fuse it gave power to the raptor lights nonstop….with the car off and everything..so I used the “INJ” fuse and it works properly by only coming whenever the car is running….sucks cuz I did want to have it come off if I turned all lights off but the deal fuse also did the same thing as the low beam
I usually run with my lights on all the time. However, mine aren’t powered unless I turn my lights on. Interesting
How did you get the fuse box lid to close with the add-a-fuse in the INJ location? That's actually the one I *want* it to use to be able to have them on whenever the ignition is on? In my 2020 the lid won't close at ALL with the add-a-fuse in the INJ location...
Dremel a little spot. There has to be something hitting it.
Same here I used the add a fuse and the lights won’t turn off
Looks great - that link goes to Tacoma Pro for the raptor lights - does it need Tacoma or 4Runner raptor pro lights to fit bezel - thanks !!
Those lights are what fit into the 3B bezel.
@@MtnTownDetail The Tacoma lights fit the 4Runner bezel you used ? Awesome vid but confused cuz link
For spartan lights goes to Tacoma
@@KTB3007 correct. The Tacoma lights are what you want
Great video. Thank you
Any problems with these 2 years later? My 2022 4runner starting throwing a “brake override malfunction”. Comes to find out something is burning a fuse and causing this. Took it to the dealer and they said it could be the raptor lights causing it.
I no longer have the 4R
Does it matter LH-LO or RH-LO for the fuse? And is there any dimming on the particular light?
It doesn’t matter. No dimming
Does seven Sparta sells the brackets for a 2021 Tacoma sr5 that doesn’t have a tdr grill ?
Hi, so this brackets would not fit my 2021 Toyota 4Runner premium SR5? Because in the video you say that they will fit an SR5?
Grille is the same so it should
Cuanto seria el precio . Esas luces para mi 2021 4runer trd off road
Hi, can someone please let me know if this will fit my 2021 Toyota 4Runner sR5? It’s because I bought a pair one day and they didn’t fit the holes were too big that’s why I wanna know if this one’s fit so I could buy them for my 2021 Toyota 4Runner sR5. Thank you 🙏
I do not think it will
How do I rig these things as running lights that work with headlights off
You will have to wire this to a switch if you want that to happen.
Thank you
Hi, I installed mine today I did what you did I put it into the hole but im afraid that it will melt the cord. I left it like that what do you think
Anyone please let me know if I’m risking my lights by leaving the cord and touching that body frame of the 4 Running. Thank you 🙏
What hole
If you did what I did it will be fine
@@MtnTownDetail there is a little hole on the Frame where you insert the cable I was just wondering if that area gets hot I don’t want to melt my cord thank you 🙏 the raptor lights are beautiful. Love your channel and your beautiful Toyota 4Runner and the tundra.
So, the bezels need to be purchased separately correct?
Yes
Can you put the link to buy the bezels
@@jmendez0212 The link is in this video description. TY - Ed @3bMakers
where do gonna order that product
Can this also be hooked up to the ignition so when i turn on, the lights automatically goes on.. thanks
For sure! Hook them up to which ever you prefer. I preferred low beam
Hola gracias me hacía falta un video haci . Para mi 2021 4runer trd off road primiun.
Disculpa en contraste esas luses o si tienes el lik de donde las compraste ya que la parrila no es agual
How can I order? Do they ship to Canada?
I’m sure they do. Google 3bMakers bezels or link in description
Yes they do - I got them.
where to buy bracket
Check my video description
What is the difference using the relay fuse by the engine or inside under the foot brake?
Different sizes
I cannot get my fuse cover back on lol
What kind of problem are you having?
Are you putting it in the INJ location or the headlight low beam? Mine won't fit at all in the INJ location...
@@MtnTownDetail I got it to shut but kinda tore a little of the plastic covering off the wiring
@@CKMX I dremeled a little slot for the wires.
Anyone needs bezels fit your lights for sr5 2001 I decided not to install my lights so I can sell my brackets for same price I got them
nooooo sold out lol hopefully next time :)
less airflow
That is true