Це відео не доступне.
Перепрошуємо.
So, I Gigged the BluGuitar Amp1 - Here's My Verdict
Вставка
- Опубліковано 16 сер 2024
- For my Presets visit: johnnathancord...
For ArtistWorks courses: artistwork.prf...
For TrueFire courses and All Access Memberships: prf.hn/click/c...
Use the code JNC40 for a 40% discount off all courses, or JNC100 for $100 off all access membership!
00:00 Tony asked if I'd try it on a gig
1:28 How I had it setup
1:50 Tony's settings on the side
2:05 the Cab I used
2:49 the Remote1 and how i used it
5:00 Amp1 settings
6:35 Modeler workflow, but Amp vibes
6:50 Using the Speaker Out?
8:00 Would I change anything about the Amp1?
/ johnnathancordy you can get my backing tracks and lesson tabs here.
www.buymeacoff... - if you like what I do and
only if you wanted, you could buy me a coffee!
Get my PADs bundle here: www.paypal.com... (this folder will grow, and I'd encourage you to ask for different keys/songs and stuff that might suit this type of preset?)
I've decided to make it possible to grab both my Helix/HX Stomp bundles (the expression bundle with freeze presets has always been separate) together - www.paypal.com... - I will then email you a link to both bundles!
Try my general patches for Helix or HX Stomp in this bundle using this link - I will then send out the patches! www.paypal.com...
You can get my EXPRESSION patches in this bundle using this link - I will then send out the patches! www.paypal.com...
Try my patches for Pod GO using this link - I will then send out the patches! www.paypal.com...
/ johnnathancordy get my backing tracks here
www.buymeacoff... - if you like what I do and
only if you wanted, you could buy me a coffee!
I am gigging with it for years now. Using it with the HX FX with the 4 cable method and the Bluguitar MIDI adapter. I am controlling the amp completely with MIDI, even gain levels within the presets. Works absolutely reliable and sounds fantastic....I am using the clean and the classic channel most of the time. The HX FX and the Amp1 have a perfect form factor to sit on one pedal board. Bluguitar offers two small magnets for fixing the Amp1 on a pedal board. Which is very practical if you want to use it without the HX FX from time to time.....When I travel with the amp, I can store it easily in any hotel safe.....
I’m doing essentially the same thing with Helix LT in 4 cable method with Amp 1 Iridium and controlling the Amp1 through midi using the Midi 1 adapter. Using Two Notes CAB M+ from Record out to the board ( disabling the on board cab sim). Love the sound from the Amp 1. Best sound I’ve ever had, bought it used for 800 CAD.
@@Eliminator-rl9sn I too use that ability to adjust the gain level via MIDI within a patch, such a useful feature.
I use the same set up for #majikband And love it.
I just got the Tom Quayle Laney Lionheart Loudpedal. It’s awesome! Very happy with the tone. It was a little more in my budget than the Amp 1.
@@victorvaldenegro4001 I would love to know... how is the "feel" when you're playing clean? Does the attack have some "bounce" or "give" like a valve amp?
Best Amp ever....
After countless valveamps, which i still own, this one is really doing it...
90 gigs a year since 2016 never let me down, designed for the live guitarist rather than the tinkerers, it's a working guitarists amp that delivers for me night after night.
Say it again brother!
:-)
I've gigged amp 1 for three years now and love it.... Thomas is a genius 👏🤘👍
In stead of using the recording out to FOH you can consider using the BluGuitar BluBox: it's got IR's of many vintage Cabs with a balanced xlr out for FOH and a 'through' jack for connecting a real cab (if you want) for your stage sound. A very versatile piece of gear!
this is PRO giging amp and mainly working musicians are using it and to me is a special thing i love. It is the only thing in this category that is aimed at a live use, which today is so rare, everything is youtube and siting in your chair and for that it pushes me to work more
If you get the MIDI1 adapter from Bluguitar, then you can control the Amp1 via MIDI from the HXFX and you don't need the Remote 1. Also, if you really have just the 3 main amp options that you described you can program the Amp1 directly in preset mode (see the manual) again without need for the Remote 1 or MIDI. (I have nothing against the Remote 1, just pointing out that you can gig with just the HXFX and the Amp1). The later Iridium Amp1 (voiced for heavier more metal tones) has an option to disengage the cab sim on the Rec Out so you can apply your own. It doesn't provide an option to load in your own IRs.
The only issue I've encountered is a player fault where I held my foot on the boost button for too long in a gig. This put the Amp1 into 'listen mode' for programming via MIDI. So when I selected my next preset on my MS3 controller I didn't get the sound I expected. Something you do once only....
I understood some of these words, and they seemed really helpful
I agree with this - I got the MIDI cable rather than the remote .. everything you want from the remote can be done by MIDI instead and that means one less box to carry ..
Ripping solo, John! And the Amp1 sounded great!
I love my Iridium, no one control needed for me.
Classic channel, all set to 5-ish, sounds like a great Jcm 800.
I have a small board with mini tuner, SD1 and a mini wah. I run a long cable to Amp1 that sits on top of 4x12.
I do have a Blu box as well that sounds great, but the out to FOH is good enough for the drunk people at my shows.
I love the simplicity and ease of tones and setup.
I constantly get asked what amp I’m using.
Been gigging with it. Sits perfectly on my pedal board. Use 4 cable method. Has tone for days and takes pedals great for a fantastic and easy live performance. It has been a game changer for me and I have used all the popular heads. I am looking to grab a used one for a backup but with the Nano tube I am not sure I will ever need one. Terrific piece of gear by Mr Blug.
Bass player at the gig is pretty damned good.
Have been gigging with it for some years now, couldn't be happier. All the sounds I need. When I talked to the soundman at one of the last gigs (before we played) and said I might consider getting another amp (I was thinking about the AmpX when it comes out), he told me after the gig he saw (soundwise) no need why I should get another amp.
While I have gone silent stage with a Fractal, the Amp1 was what I used for a few year. I had an HX Effects, Amp1, and Thomas's BluBox on a pedaltrain board. It was a very powerful setup. The BluBox completely opens up the possibilities of the Amp1. The built in cabinet of the Amp1 is an IR based on Thomas's Marshall 4x12. That's fine if you like that specific cabinet. I much preferred the Fender-ish 2x12 setting on the BluBox with the Amp1...and I could tweak the virtual mic position on the BluBox to adjust the EQ as needed.
I gig one sometimes. It is a great amp in its own right. Last festival gig I used it with no cab, straight to front of house and used foldbacks for amp sound. It sounded great. Lazy set up for me.
Amp1
Bag of leads
Guitar.
Job done!
The recording out has more mids without a speaker connected. Or in other words: a speaker imprints it's mid scooped impedance curve when connected (like on most tube amps).
I gig it often since the 1st version. Now I use the Mercury edition in Low Gain mode (as I would never use the bright cap in an old Fender amp) and it's even better for my needs. In the Mercury edition the shared EQ is no longer a problem for me. In the Silver edition it was always a bit of a compromise. When drive channels set to my liking the Clean was too bright so I had to lower the Treble and Mids controls. No need for that in the Mercury.
The Vintage and Classic Channels beat plenty of all tube amps. Amp 1 is one of the smartest pieces of gear I've used.
Thanks for Your videos!
Used the amp1 and HX for a few years now, 4 cable method, no issues whatsoever.
I sent the Amp 1 back 1st time I tried it using the record out - the one you sent to front of house. I tried again with Thomas's BluBox speaker sim and to my ears (50 years plus a pro!) it just brought it to life. I use it through QSC's and blueBox is great. Through a guitar speaker not so important I guess. Had communication with Thomas, who wasn't trying to sell me one, just helping me to get an IR box I already had to work. It didn't so I got the BlueBox and it did it for me. I would just like a bit more control over the boost volume btw. Whaddya gonna do. I use Nobells and a Bluesdriver and works for me as a pedal platform. Good bit of gear, like everything you have to work with it, even if it is simple.
I don’t gig at all, but I used my Iridium with my Hx Stomp going 4CM, programmed my presets with the MIDI adapter, and monitored it with my 1x12 cab, used the BluBox to go FOH.
I really loved the tones I got… it’s very easy to program with the MIDI learning feature. The BluBox is also a breeze to use, very simple and the giant tone knob (mic placement) makes it so versatile and simple to adjust on the fly.
As a Metal guy I mostly use the Mesa V30 and the Marshall G12H75
Your playing indicates that you could probably use just about anything and get great results…
Nice job!
I’ve used mine at many gigs.
Didnt realize at first this had a power amp when I first saw it.. was like “how he driving that cab” watching this vid. pretty cool.. wish my stomp xl had a power amp, even just 15-20W for home/practice into a cab. I think there is room in the market for that kind of thing. Have to buy a power pedal at some point I guess.
I LOVE Behringer, as there is a surprising amount to be discovered in their products, for those who just "dig in" and learn how to get what's there. Their old "V-tone" amps can be as good as Fender's tone masters if you do the digging.
I’ve been gigging one for years 🤷🏻♂️
It’s a great sounding unit. Thomas is a really clever guy, hope he has some success with the AmpX
1. I would have liked to be able to switch the cab simulation on and off via MIDI so I could use the HX IRs without conflict.
2. The Eq is really for the room. I set mine at 555 and then change it to taste on-site. Other eq I do from the HXFX.
3. As @spharr says above, the Remote is redundant if you use midi from the HXFX. Any preset or snapshot can completely change the Amp1’s channel, volume, gain, boost and reverb. That’s loads of flexilibility.
Great Amp with huge sound. I used this for a while and changed it for a Milkman Amp 100 in combination with some drive pedals and a Boss MS-3 for modulation and switching. Thanks for posting this video, maybe i will look for a second hand Amp 1 as a backup amp
As far as I know, Thomas is using his Amp1 live with his Bluguitar BluBox (IR-Unit in size of an DI-Box loaded with 16 IR´s) to achieve the tones he is looking for. The 16 IR´s are carefully selected, always with the goal to be as flexible as possible, while keeping it as simple & reliable as possible...
Thomas is a freaking genius!! Great tones...
That live clip was 🔥 (i would stick with the AmpOne)
Enjoyed your gig playing here. Do more of that on your channel :). Now what I suggest you do is to use your TONEX to build tone models you want and then run it into the FX Return of the Amp1 and use it as a power amp live. You'll want another 10 band or parametric EQ pedal between to help adjust to rooms because you won't be able to use the onboard Amp1 EQ since you are bypassing it.
What would I change? Several things. I think the EQ should have be saved/modifiable per channel as presets. I think the tiny crappy pots on the side should have been mini pots on the front. I think there should have been option to chose to run the EQ pre/post preamp vs FX loop, and the MIDI should have been a separate standard midi input either 5 pin or mini, but otherwise yes a phenomenal invention otherwise.
I hear you! Some of your points I totally agree-some maybe not… Thank you so much for your feedback!!!
Greetings, Thomas Blug 😊
Get a used two notes Captor x and you’ll have an amazing sound with this. My favorite is running it into a Vibrolux or Twin cab. Sounds incredible.
To me it's all about the natural interaction with the power section which you don't get through the recording out. It's basically a solid state preamp at that point.
I hear you! You get poweramp reaction with AMP1 on the recording out as the recording out gets it’s signal from the speaker out. Mind that AMP1 can create even poweramp saturation without a speaker connected.
To get the real deal speaker feel experience: a speaker should be used at tge same time, then the speaker impedance curve reacts with the “current feedback design” of AMP1’s poweramp stage. Just like a traditional tubeamp….
how are you not drowned in studio work with those skills? you play amazingly!
To be an in demand session guitarist, playing well is only a pre-requisite cause all of them can play extremely well. The other pre-requested is able to sight read, and play any styles on demand.
@@vmx23 Nah, studio work is different. People generally want a guitar player to come and write parts under direction. Reading will most likely be chord charts if it’s involved at all.
Not many people making records know how to write music, so the odds of you being presented with a score on a session are pretty low.
Film scores are probably the most likely.
Generally it’s about having a big enough bag of tricks to be able to pull suitable parts from and play with feel.
John's had some involvement in similar work. Couple of years ago he went to real world studios to play on an album. You could probably find the videos he did about it at the time
ua-cam.com/video/Gtbaaw2IGgM/v-deo.htmlsi=3Whpm1TgNh9IY6n9
@@tonystartup3817yep the keyboard player from Marillion has a project and album called "Marathon"
Those 80s mesa cabs are fantastic, I got one with a celestion mc90 and I haven't found an amp that it sounds bad with
Borrowed an early one -sounded decent and was plenty loud, but one of the custom designed footswitches would stick. My recommendation would be using stock off the shelf switches
@ John Nathan Cordy been trying to get the 1Control for probably almost a year in the states here. BluGuitar accessories aren't easily available to us in the states FYI.
For a player of the level of john the gear does not really matter anymore , it always sounds great .
Only things I'd really like different, is a presence control - though it does seem to work ok without it, and a switch to turn off the bright cap on the volume
Agreed
A Built-in Tuner seems like a good idea. One less thing to have to bring to a gig, or accidentally forget. 🤷
Needs more tonal control of the upper mids, without affecting the top end. That goes for most recent amps. As they've been generally voiced brighter, if you try and tone down the top end, you get a muddy sound, as the top end tone controls wipe out the upper mids too. Alternatively have a mids voicing switch, so you can adjust where the mid control operates. I use a Hartke HD75 for extended range guitars. It has a 3 band eq and 6 band graphic. The 3 bands are under and over the graphic, with one between the 6 bands. It was the first amp I found which produced the full tonal range of an 8 string without bi-amping.
I have been gigging (church gigging) a Quilter Superblock US. I would definitely gig a BluGuitar Amp1. However, it might be more wattage than I would ever use at church. Does it do power scaling?
It can do with the remote 1, or the new small one control thing. Instead of the second master volume you can use the power soak button and dial down the wattage. To be honest though, unless you want a sound that is softer and mushier like your power section is clipping then it's best just to turn the amp down but run it at its normal 100 watt. It's not like having a full tube amp that doesn't like running low, it's more like just turning the sound down on your stereo. I run it at the full 100 watts through a cab at home and can easily run it at taking volume
Powerscaling is possible*, but not needed. The vintage channel eg uses power sagging like a cranked tube amp.
*there’s the internal half power mode.
With external controller like Remote 1, 1Control or via Midi the power is scalable from 100 watts continuously to 7 watts without any sacrifice in tone. And from 2watts down to 0,150watts for home/bedroom (with a little dampening similar to a powersoak with an ok reactive load).
Greetings, Thomas Blug
Is this much better than say the new Laney Loudpedal Tom Quayle? I'm thinking of buying one. There's a lot less features but the price is right and it sounds great.
Waiting for review of the Laney! :)
Feedback - ditch the reverb switch and have the master volume switch instead!!!! Please for pity's sake do this!!! Leave the reverb control on there but you don't need to switch it!.. Use the switch for a volume boost..
Isolated XLR DI Output would be an improvement.
Having the tones change dependent upon loading needs to b addressed IMO.
Did Thomas mention anything about when we’ll be seeing Amp X … It’s been almost ready/coming very soon, for about 6 months now … 😊🙏🏼
I feel it's been talked about for years now.
We are finalizing the last hardware on AMPX. It’s already like the 5th… this time it’s the last - I promise! So we will see it finally in the near future…😊 greetings, Thomas Blug
@@BluGuitar Good to hear!
@@BluGuitar Thank you for the reply, Sir! 🙏🏼 Be well! 🙂
Actually, Thomas probably wants to send you an AMPX when they finally get released.
"I'll release it when it's ready"
-Tom Blug
;-)
I’ve had 3 (first 2 didn’t work properly- 1st one had a faulty foot switch, 2nd one the boost got stuck at maximum level and would not adjust). 3rd one is great and sounds huge
The boost thing was a known problem with the spindles of the adjustment dial. The boost uses two pots so is harder to turn and the spindles on a batch of controls were not strong enough and quickly broke. I had it happen to my first two as well
@@tonystartup3817 glad it wasn’t just me. The retailer was great about it and replaced them no problem.
The elephant in the room in terms of alternatives is the black star amped 1 series etc which is a bit controversial given Thomas comments on the copying. What about Laney lionheart loud and laney ironheart loud pedal
Many people waiting for the new one...: BluGuitar AMP X!!!!!!!!!!!!!!!!!
Im looking forward to the ampx
Haven't watched the video yet - but I didn't get angry messages cursing my name last night so I'm assuming at least it worked and didn't end in disaster?!
Ah good, it worked ok, I'm not in the dog house 😅
How was the live audio & video captured?
I tried it, its almost perfect, loud and small, but i cant dial out those fizzy high ends, even in full volume. A presence or more high and mid eq would be good
Try low gain mode (hold boost button/switch) while turning on AMp1, the LEDs will blink in about 3sec and you are in low gain mode ,which will shave off the high end.
Seems like the BluGuitar Amp X is nearing its release date. ;)
Nah, just a coincidence as far as these videos from John. I've had the amp 1 for a few years and have often talked about it to John. Last time we met up to loan him the Satriani guitar he was bringing the Headfirst dirty Shirley clone, so I thought as he was lending a marshall type thing I'd bring a marshall type thing for him
I need to buy seeds for the f-cking birds.
Also, I ordered the Source Audio Artifakt, which should arrive this week. Lots of lo-fi effects in one box.
I might use it in the loop of my EHX Superego, you gotta transform those "frozen sounds"... So I also have a chorus and the Whammy DTS in this loop.
So when I freeze a chord, I can change it through 2 Whammy...
And keep playing over it.
Those are my thoughts right now.
Unless I missed it, I'm surprised you haven't had a go with the Marshall Origin 50? Blug was after a Marshall tone IIRC; and went further with the Mercury and Iridium, I stopped waiting for the Amp X, but if you want portable Marshall tones on a budget, the Origin is worth a look IMO.
I have both the Origin 50 combo and head, and for the money I'm extremely impressed; guessing they're even cheaper in the UK; the range of tones, the power scaling, responsive to player nuances, and cleans up with guitar volume, etc. all work great. The only thing I don't use is the amp boost as it loses definition in the high end (i.e., adds muddiness) IMO.
I've owned many Marshalls over the years, and still have a 1959HW and JVM410H (haters gonna hate, these open up if you get the master at 2 o'clock or higher) and the Origin isn't far out of the league especially considering the price.
Totalt agree, lots of hate for the origin, but it does the job perfectly! It is not a high gain amp and the boost is a bit useless, and it has no reverb but stick a p90 guitar in it and u instantly get the sound! Wish they Will make a 50w 2X12 combo or a 100w head, with reverb and Di that is either really good or just a line out so u can add ir’s! Fender bassbreakers are a good allternative also in that anything else then a Blues Deville market! :)
... and if you start using the MIDI, be VERY careful about not accidentally plugging the custom MIDI cable into the wrong jack bc you will fry the components inside the custom midi cable.
What are the benefits of putting the high pass filter in relation to FOH connection?
ISP Theta Pro? Any experience with it? Interesting?
I have a question for everyone here that uses one of these with the line 6 HX effects, or stomp, etc.…
I tried an HX effects with mine, but there was a strange digital feedback/interference with it. It was constant quiet and in the background, but constant. I wasn’t able to use it. Anyone have this experience or suggestions on what it may be and how to fix it?
there´s an issue with hx effects from a certain year of manufacture. I had that problem with one that i bought used. That problem got fixed by line6 in a later release. I then bought a new hx fx and no noise whatsoever. It´s a hardware problem, not software.
I think it was actually in the first edition of the Amp1, NOT the Iridium and Mercury versions, where the manual said not to use the recording out and powered out at the same time, as I can’t find a reference to it in the current manual. However, I did see that at least one other person commented on one of Thomas’ original videos asking for clarification, as he himself was using both outputs in that demo vid. Sorry for any confusion! Sounded great at your gig. Cheers
I'll confess I don't really understand these devices. Is it similar to the Laney Lionheart and Ironheart units? For a live gig, if it goes to the desk only, and then you hear the sound through your monitor, I assume that'll save on carrying gear (an idea I like). But could that be done with a Tech 21 Fly Rig, just the same? If you do have to take a speaker cab, then why not just take a combo to the gig. Like I say, I don't really understand them.
The idea is: think of it as a full multichannel head in a stomp format. EG replaced many Marshall JVM410…
As a pedal it is easy to put on a pedalboard too. All cabling get easier and shorter.
You can drive a cab and go direct at the same time-or just use 1 out-whatever you need. Having full 100 watts power and sounding exactly the same on any power outlet on this planet it became the choice for many touring professional players…
But hey, if you like your good old combo: that’s also great!
@@BluGuitar Thank you. I do like my combos, but I also like travelling light! I take on board what you say about touring musicians.
Not a comment, so much as a question, which is I wonder how this might compare with the Friedman IR-X used as a tube preamp, with a good Class D amp as the power amp? Just asking since you have good experience with the Friedman IR-X, which I thought sounded really special. And a class D amp with that combine with the Friedman to put the pair in a similar price ballpark (Seymour Duncan Power Stage, Palmer Macht etc...). Albeit with the faff-factor of two boxes. Though the Friedman could fit on big enough pedal board, as could the SD Power Stage.
You can use the amp 1 FX return to power the IRX. I think maybe we need to suggest John giving that a go whilst he has it
@@tonystartup3817 Good idea. I mean, no doubt there's different qualities of implementation of Class D power amps too. And no doubt Amp1 is a very well designed. But, for Power Amp only, there are some other good options (even Bass amps, which have had great super high power Class D Power Amps for a long time, Thunderfunk, Aguilar, and the recent Ampegs - like the Venture series all sound great. Sometimes going massively overpower is a great way of getting super clean power amp. Tube Power Amp modelling, with sag etc, is an area pedal / amp designers need to explore next.
As someone fairly new to the channel, who is this mysterious Tony From Up The Street?
Honestly, just someone who started watching John's videos but then realised didn't live very far away and offered to loan a guitar to try out once..... And been swapping gear around since then as and when I've had anything remotely interesting in
@@tonystartup3817 Ah, cool. Thanks for the demystification. I've always loved swapping gear with friends; definitely a great way to try stuff out.
I must have got a dud! The amp has let me down twice at important gigs by shutting down - went to adjust master volume, suddenly no sound - ouch! Took it back to where I bought it from but out of warranty by then so they couldn't help. Believe it's a heat issue ( thermal shutdown?) as it worked fine when I got it home... unlikely to use at gigs again as twice bitten...Pity cause it sounds great when it works.
I had 2 of them die on me. Both would shut down randomly then both eventually went up in a puff of smoke. Several others had the same issue with them shutting off on The Gear Page. There must have been a bad batch produced.
Shame cause they sound great but too unreliable 😢
@3:44 when you realise all cover bands in the UK and AUS play the same songs 🤘
I have a question… I saw the schematics and I think that the reverb is before the fx loop… which means than if you put a delay in the loop, you will delay the reverb.. isn’t it a non sense for you?
Hmm, not sure. Certainly reverb doesn't seem to apply when coming back in to the FX return - when using the amp 1 as a power section for a preamp pedal so I guess the reverb has already been added at this stage. I've never had a problem with running a delay in the FX loop though, sounds good to me, and Thomas uses a delay in the loop a lot too.
How does it work with a normal amp that has reverb? Isn't it exactly the same? Pretty sure my combo amps that have reverb on board have it in the preamp section
The reverb is after the effect loop on my Mercury edition for sure.
@@tonystartup3817nope reverb is before loop.. the only irritating thing is that the noise gate is after reverb and kills the reverb tail.
@@dr.gregoryweisswassernd7251 I just checked the manual and it says the reverb is before the noise gate and the fx loop. In the signal flow part
I think it sounds very unnatural for what it proclaims to be. The Friedman IRX and IRD are far better options, that sound like tubes should, even though it’s “unpowered”. Nothing a Seymour Duncan Powerstage can’t rectify.
I've used John's IRX into the return of the amp 1 so I can use it's power stage to power a cab. It was cool, it worked well, but I didn't think any of the sounds that you could get were really much different than you could get just using the amp 1 by itself.
Maybe I should suggest John giving it a go whilst he has both of them himself
I’ve had the Amp1 for a bit. Even purchased it twice but I kept selling it. For a few reasons.
1. Although it sounds awesome, I don’t think it’s well suited for today’s modern player. No single DI output or ability to load cab sims.
2. The design layout is a little weird. Those little switches on the side are a pain to deal with. Rather have a master presence
3. Although it can be controlled far beyond whats offered as a stand alone, I’m turned off by having to buy all these exclusive items to make it work. Proprietary midi cable? Magnetic locks? A huge controller? A DI/Cab Sim box? Most of those things are built and designed into most products today, felt like I’m already paying over $800 for an unfinished product if that makes sense.
4. Then of course there’s no availability of those add ins in the US
For these reasons, I think this product hasn’t taken off. It’s just not as practical. I know Blackstar also make an Amp1 clone and it generally does the same thing but a bit better designed in my opinion.
Please pleas pleas dont say Blackstar makes something similar. They do not! They only copied the layout, stole the name but thats all. Totally different technology!
"It’s just not as practical", that's really weird considering it's main points is being small, portable and practical 100w amp (not multi-effect digi box).
Behringer never did anything to anyone. They knew what they were getting into it when they bought it! LOL Bass players...
Did you play anything they could dance to...
superstition - cool as ...
Play that Funky my man 🤘🤘
@@mikeyo3230 the 1st clip was superstition wasn't it?
You need a new drummer
Love bluguitar amp1 mercury ❤️