I wonder if you have a method to add battery capacity to the balance board yet? I notice on the opposite side from the battery there appears to be space where another battery could be added in series and possibly extend the range/riding time pretty significantly. Seems plausible that a lead could be run through the pivot of the board. Seems like the extra battery wouldn't adversely affect stability and add just a little weight. Is that something you might be willing to try? If not, could you suggest a battery with the form factor required so I could try it myself please? Helpful video!
Can you send donor parts? I'm looking all over but can't find any, I need the right pad sensor. I have this exact problem you are describing but can fix myself. Please let me know.
both sides of my board are not responding. No balance function on either side. What does this mean? Balance sensors on BOTH sides or some other problem?
The board you pointed out inside the motor is not the tilt sensor! That is the hall sensors for the motor, it tells the motherboard where the motor is in its rotation. The board you replaced is the gyroscope and activation board. It measures the angle of the board.
Is there a way to control that sensor from some of the pin outs on the sensor board? I’m wanting to use the guts out of one and change the throttle control to a pedal
i bought the sensor tabs from your given link .now i have a problem,my battery light does not turn into red and does not beeps while the battery is running out any suggestion?
I got a brand new board from China and I feel that it's too sensitive about going left/right, making it difficult to go straight line. It's quite dangerous when I go a little fast and the board suddenly and slightly turns. I don't think my feet changes position or even if they do, it would be very slightly. (this is why I said too sensitive). I'd love to bring it to your shop but I'm in Singapore :(. Maybe you know what the problem is? I've tried other board and they are not like mine.. will greatly appreciate if you can tell me how to repair/modify this issue.
Hi, hoping someone can help me with our brand new board. It's never been ridden because it won't self balance. When turned on, the green battery light operates, however when you step on the pad, a red light keeps flashing. I've tried resetting it and it does the same and then beeps if you try to ride it. Any suggestions would be greatly appreciated.
It sounds like one of the cables just got disconnected inside. Mine had the same problem. When I opened it to examine, one cable became disconnected. I reconnected and it worked.
i have a problem my board is not self balancing any more i am just getting a blinking red circle i tried to recalibrate 3 times but still getting the red light do you have a suggestion
On my board, I have a similar problem. When I lean forward quickly the board completely shuts off. I can only get it to turn back on with the charger. How can I send it to be fixed? What do you think is wrong and how much would I expect to pay for a fix?
I notice all the repair videos are boards with a main circuit board and two balance boards. I have the cheap board with just two boards. is there any repair for these boards? Can I upgrade my balance board with your kit? The sticker on the bottom of the board says Chic. The front of the board says Zipcraft. Its a cheap board all plastic. It only worked for 14 days.
Hey bro I have a uwheel not the actual uwheel but I have the one that has the LEDs on top and plays music they say it's the "Lamborghini's of hoverboards" we'll both my sensors aren't working :/ how much would it be to send it to you and fix it ?
one side of mine doesn't work at all doesn't light up or respond the other side only lights up when stepped on but doesn't move do you know what the problem may be?
Hey im trying to fix my hoverboards right now and all they do are you step on and the red circle comes on whenever you first step on, we have tried calibration and we have opened it up and the red led indicator blinks 9 times, we have look at all the parts and they seem like they are good any help?
Hi one of my sensors went bad, i replaced it, everything is normal no stable blue light but now it's going like 10 times faster only on that side can that be fixed?
hey! the problem im having is both the blue lights stay on, on each side. when i turn it on and get on it it doesnt balance nor go forward.. will replacing the sensor do that trick ? it worked fine. but the calibration was off so i reseted it like 3 times. and then boom it doesnt work anymore. i hope u reply
Hi, again, my balance scooter suddenly turned off without any warning and it won't turn on. Could we send it over to you? I think that maybe there's a blown fuse somewhere. But I'm not sure, so thanks in advance sir (:
but me friend havethat 3 days and wehn he do it on he puts his finger to loong and we have the same problem with the light how much costs a new sensor or can he reapr then to buy nothing pls
I'm having a similar issue my left sensor light is staying on as in this video but my motor still works basically its staying on as if I was on it and when I get off it goes crazy cuz it won't turn off like it should when u get off please help ASAP!!! Thanks
Thank you for posting this. Hopefully it works. I might try and fix it on my own or send it to you. My problem though is that both of them are like that. Can I order that sensor thing that you replaced on your website?
Hi don't know if u can help. My scooters been having problems I ride it and its fine for a couple of minutes then all of a sudden red light comes on and the scooter tilts back and flings u off. Any idea what the problem is. Can any 1 help Thanks
Hello I need help so my light is just like the one you have in your first video but both lights are on like that so I took it apart like your video say and removed everything but it's still not working and then there is a red light flashing on the inside of it after I took it apart any help??
I fell about 4 times outside (stumble/small crash) and I recalibrated and it's fine but the 4th time the red circle (indication that needs re calibration) kept appearing and if I step on the first pad works but the second doesn't and if I switch same thing HELP!!
My scooter's left pad isn't working. It doesn't move, only the right side one is functioning. Not sure what's going on, when it's turned on, it beeps every second and it shows a red light like the video displayed. Any fix or suggestion for the left pressure sensor, it's not detecting weight, light isn't turned on or anything. Please help!
Any ideas how a calibration could disable 1 side, and then after a few more attempts the other side is dead too, seems weird as it wouldnt of been dropped or hit, for the second side to go down?
and now when i try to recalibrate it, i dont get the flashing red circle, instead it just powers up? help. bricked? bit dodgy how something can brick by use of the on off button!!!
+Cory Kozminski Hi, if you are certain the battery is defective, we have the battery available at shop.digitallifex.com. Please refer to your balance board manual to ensure the voltage for the battery specs match the replacement battery at shop.digitallifex.com. If you have any questions, please feel free to call us at the shop during normal business hours
I have a bluetooth one that is newer, but all the lights are on, like the blue lights are on, and there 2 green lights at the top are on which it only does that if you are on it, but when I try to stand on it, it doesn't balance.
hello!I need your help. In my scooter 1 wheel is not working properly.Whenever i turn on my scooter to drive one wheel stops working after 10 to 15 secs of driving and red light starts to blink.The wheel is on the power button side. please guide me how to fix this
My board is completely unresponsive now to anything all it dose is light up now and the left side which was the side I was having the issue with the flashing red light now it's flashing just the led light on the left side is flashing consistently at this point i don't know what's going on now ...
Hey. I'm having the same problem with my hoverboard, but this is on the opposite sensor and not on the side that you are fixing. I have tried looking for a spare part for the other side as they are minor differences in the wiring. If there is anyone with any suggestions or links, I will defiantly appreciate it.
Question: Don't you have to calibrate the new sensor first? You just replace it, and switch on the board? And that's it? I got my board and probably screwed up calibrating it. So I never used it.. yet. If I get a new part I do not want to mess up again, hence my question.
the issue that im having is one of my wheels dos a jerking motion and wont move forward. very similar to this video in the link... is there a fix for this videos here "Broken monorover2/ smart balancing scooter""
+Aaron Madero We are located in Virginia, and we have a repair shop. You can fill in online repairs at digitallifex.com/repairs. If you have any questions, please feel free to contact us at 804-918-0777 during business hours
The LED light in one wheel was cut off, so when i open it to fix i heard a buzz sound and stop working, and when i open the power i can not close it unless i remove the battery socket can any body help?
Hope you are having a nice day. When make power on, both sides blue led lights come on and they stay on. It doesn't move at all. Can you tell me, what is the solution? Eagerly waiting for your Valuable Feedback.
don't see any video in how to fix the bluetooth, suddenly one of the hoverboard stop working and now it does not recognize the bluetooth at all, have you experiment such a problem? any videos showing this issues will be appreciated, don't see any at all at this moment.
both my lights are solid blue. this happened after i tried to calibrate it. i think i put it in a weird mode. anyway out of this. I'm in california. my board was working fine before the calibrate attempt....please help
+Vu Hoang Dieu Anh Hi, we accept online repairs at digitallifex.com/repair - Please fill out form, and we'll send an email confirmation with your order and instructions to send in your repair. If you have additional questions, please call us during normal business hours
Hello I have exactly the same problem, but I'm not as good as you by fixing things so do you guys actually fix it yourself if I send you my board? I'm french by the way. Reply to this comment and give me your price please
Hold the power button for 10 seconds then you will see both lights blink but make sure you have all the board level before you do so and let it sit there for 3 minutes and then power off then it should be fine
so i have the bluetooth version that looks nothing to this hoverboard its slightly bigger but anyways can anyone help me the hoverboard doesn't turn or rotate in a 360 motion to the left but it rotates right so everytime i meet a left turn i can't turn because the right side won't allow me to turn.
+William Lamboy We are now accepting online repair orders at digitallifex.com/repairs. Please fill out the form, and we will email you confirmation and instructions to send your board. If you have any questions, please call us during business hours
Yeh the one I got the sensors am on the 2 controller PCBs and the flat edge of the motors mount is facing down but like this issue one motor works if I tilt the controller's it trys to change direction just can't get em both to run need that balance bypass cus I'm converting a mobility scooter nightmare lol
It isn't calibrated. Turn the board off and on again, only this time holding on the power button until you hear another beep. This means that you are in calibration mode. Tilt the board until it is level and turn it off. NEVER STEP ON THE PRESSURE PADS WHILE CALIBRATING!!!! This will fry your hoverboard's gyroscope, and you won't be able to use it again
Awesome video !5:29 That is hall sensor for brushless motor mechanism ,whereas balance control is done by HoverBoard Gyro / Sensor / Balance PCB
Hi! isn't it possible to repair the gyroscope board ? It's just simple SMD components + MPU6050 Gyroscope + STM32F microcontroller.
Is it the same for a 10 inch swegway?
I wonder if you have a method to add battery capacity to the balance board yet? I notice on the opposite side from the battery there appears to be space where another battery could be added in series and possibly extend the range/riding time pretty significantly. Seems plausible that a lead could be run through the pivot of the board. Seems like the extra battery wouldn't adversely affect stability and add just a little weight. Is that something you might be willing to try? If not, could you suggest a battery with the form factor required so I could try it myself please? Helpful video!
O, x
Can you send donor parts? I'm looking all over but can't find any, I need the right pad sensor. I have this exact problem you are describing but can fix myself. Please let me know.
both sides of my board are not responding. No balance function on either side. What does this mean? Balance sensors on BOTH sides or some other problem?
I love your company and I think its awesome what you are providing your costumers!!!
thanks man I haven't tried but I luv how u don't try to sell me the parts and you show us how to do instead of selling us and going for money thanks!
where is ur shop located, my hoverbourds left wheel not working at all, I tried everythiing. Pls help
The board you pointed out inside the motor is not the tilt sensor! That is the hall sensors for the motor, it tells the motherboard where the motor is in its rotation. The board you replaced is the gyroscope and activation board. It measures the angle of the board.
Você sabe onde fica o sensor de inclinação? Tem como desativar
will this work if both motors will not turn on?
Nice video but the links to buy the pieces of the Board do not exist
Is there a way to control that sensor from some of the pin outs on the sensor board? I’m wanting to use the guts out of one and change the throttle control to a pedal
Same here bro I came here for that exact reason, I want to use it to make a rc tank
what do you suggest is a solution for a creaking noise coming from the middle when tilting or moving?
hi where do u think i could buy this from the balance sensor
Hi can u help me I have a Segway that works fine but on the left wheel it makes a weird annoying squeaking noise what can I do to fix it
Mine did this except the other green light is on too. Is it the same problem?
Do you do repairs at your shop because I don't know how to do it even if I did have the part
Hi where do I get a sensor replacement from
Same reparation steps for a 10 inches wheels overboard ???
Wheels are more hard to turn then my 2nd scooter?? are screw tightned to hard??
How can we tell what Gen balance board the we have ?
i bought the sensor tabs from your given link .now i have a problem,my battery light does not turn into red and does not beeps while the battery is running out any suggestion?
Do u think u can fix mine is having the same problem
I got a brand new board from China and I feel that it's too sensitive about going left/right, making it difficult to go straight line. It's quite dangerous when I go a little fast and the board suddenly and slightly turns. I don't think my feet changes position or even if they do, it would be very slightly. (this is why I said too sensitive). I'd love to bring it to your shop but I'm in Singapore :(. Maybe you know what the problem is? I've tried other board and they are not like mine.. will greatly appreciate if you can tell me how to repair/modify this issue.
Boyke Wijono calibrate it
Hi, hoping someone can help me with our brand new board. It's never been ridden because it won't self balance. When turned on, the green battery light operates, however when you step on the pad, a red light keeps flashing. I've tried resetting it and it does the same and then beeps if you try to ride it. Any suggestions would be greatly appreciated.
It sounds like one of the cables just got disconnected inside. Mine had the same problem. When I opened it to examine, one cable became disconnected. I reconnected and it worked.
How do you discharge the hoverboard battery so that when you reconnect the battery leads it does not spark.
If i send my board to be fixed how much will it cost and how long will it take to get fixed
i have a problem my board is not self balancing any more i am just getting a blinking red circle i tried to recalibrate 3 times but still getting the red light do you have a suggestion
Hello I have exactlyt the same problem must i buy the LED Sensor or Can i Fix it Otherways!HELP pls !
On my board, I have a similar problem. When I lean forward quickly the board completely shuts off. I can only get it to turn back on with the charger. How can I send it to be fixed? What do you think is wrong and how much would I expect to pay for a fix?
I notice all the repair videos are boards with a main circuit board and two balance boards. I have the cheap board with just two boards. is there any repair for these boards? Can I upgrade my balance board with your kit? The sticker on the bottom of the board says Chic. The front of the board says Zipcraft. Its a cheap board all plastic. It only worked for 14 days.
Hey im having trouble with the wheel on the side of the battery .. It does work for like 2 min then that one side stops what do u think it can be?
Hello, can you guys repair any balance wheel from any company?
Droped in water how can I fix
Hey bro I have a uwheel not the actual uwheel but I have the one that has the LEDs on top and plays music they say it's the "Lamborghini's of hoverboards" we'll both my sensors aren't working :/ how much would it be to send it to you and fix it ?
one side of mine doesn't work at all doesn't light up or respond the other side only lights up when stepped on but doesn't move do you know what the problem may be?
Hey im trying to fix my hoverboards right now and all they do are you step on and the red circle comes on whenever you first step on, we have tried calibration and we have opened it up and the red led indicator blinks 9 times, we have look at all the parts and they seem like they are good any help?
Hi one of my sensors went bad, i replaced it, everything is normal no stable blue light but now it's going like 10 times faster only on that side can that be fixed?
hey! the problem im having is both the blue lights stay on, on each side. when i turn it on and get on it it doesnt balance nor go forward.. will replacing the sensor do that trick ? it worked fine. but the calibration was off so i reseted it like 3 times. and then boom it doesnt work anymore. i hope u reply
mine has the green circle on and a side unresponsive will changing the balance sensor fix my problem. PLEASE HELP!
Hi, again, my balance scooter suddenly turned off without any warning and it won't turn on. Could we send it over to you? I think that maybe there's a blown fuse somewhere. But I'm not sure, so thanks in advance sir (:
how could I fix my swegway one well spins good and the other well doesn't spin at all
but me friend havethat 3 days and wehn he do it on he puts his finger to loong and we have the same problem with the light how much costs a new sensor or can he reapr then to buy nothing pls
How much to fix?
I'm having a similar issue my left sensor light is staying on as in this video but my motor still works basically its staying on as if I was on it and when I get off it goes crazy cuz it won't turn off like it should when u get off please help ASAP!!! Thanks
Thank you for posting this. Hopefully it works. I might try and fix it on my own or send it to you. My problem though is that both of them are like that. Can I order that sensor thing that you replaced on your website?
My left pad doesn't work but the right one is functioning well and when it's turned on, it beeps every second. What does it mean?
Hi don't know if u can help. My scooters been having problems I ride it and its fine for a couple of minutes then all of a sudden red light comes on and the scooter tilts back and flings u off. Any idea what the problem is. Can any 1 help Thanks
Hello I need help so my light is just like the one you have in your first video but both lights are on like that so I took it apart like your video say and removed everything but it's still not working and then there is a red light flashing on the inside of it after I took it apart any help??
I fell about 4 times outside (stumble/small crash) and I recalibrated and it's fine but the 4th time the red circle (indication that needs re calibration) kept appearing and if I step on the first pad works but the second doesn't and if I switch same thing HELP!!
Do they ship to Australia
+frank sergi yes we can
mines is working all sides but one side stays on before i get off?
My scooter's left pad isn't working. It doesn't move, only the right side one is functioning. Not sure what's going on, when it's turned on, it beeps every second and it shows a red light like the video displayed. Any fix or suggestion for the left pressure sensor, it's not detecting weight, light isn't turned on or anything. Please help!
Any ideas how a calibration could disable 1 side, and then after a few more attempts the other side is dead too, seems weird as it wouldnt of been dropped or hit, for the second side to go down?
and now when i try to recalibrate it, i dont get the flashing red circle, instead it just powers up? help. bricked? bit dodgy how something can brick by use of the on off button!!!
+Mason D Happen the same thing to me while calibrating, people are saying its time to buy a new gyrosope
1. day. old!
+Mason D mine has just done the very same thing after recalibrating 1 light stays on and right side dead
+Mason D did you figure out how to fix it ? I'm in the same situation
I think my battery pack is shot in my smart balance wheel, do you think I could send it to guys for repair?
+Cory Kozminski Hi, if you are certain the battery is defective, we have the battery available at shop.digitallifex.com. Please refer to your balance board manual to ensure the voltage for the battery specs match the replacement battery at shop.digitallifex.com. If you have any questions, please feel free to call us at the shop during normal business hours
I have a bluetooth one that is newer, but all the lights are on, like the blue lights are on, and there 2 green lights at the top are on which it only does that if you are on it, but when I try to stand on it, it doesn't balance.
does not turn on hoverboard segway! What is a problem?
Does anyone know where I can find a sensor that won't cost me as much as the board itself!
This happening whith me ho much do i need to pay for a new sensor
where can you buy the sensor replacement
+FatCatz2104 Hi, please visit shop.digitallifex.com for parts
All my light are on but the scooter doesn't work
+Harry Ayala I have got the same problem have u fixed it yet and if u have can help me please
when ever I turn mine on it starts beeping and won't stop unless I turn it off, also one side doesn't work. Any suggestions?
hello!I need your help.
In my scooter 1 wheel is not working properly.Whenever i turn on my scooter to drive one wheel stops working after 10 to 15 secs of driving and red light starts to blink.The wheel is on the power button side. please guide me how to fix this
My board is completely unresponsive now to anything all it dose is light up now and the left side which was the side I was having the issue with the flashing red light now it's flashing just the led light on the left side is flashing consistently at this point i don't know what's going on now ...
Hey.
I'm having the same problem with my hoverboard, but this is on the opposite sensor and not on the side that you are fixing. I have tried looking for a spare part for the other side as they are minor differences in the wiring. If there is anyone with any suggestions or links, I will defiantly appreciate it.
my hoverboard goes in the same direction no matter which way the pads are pushed . What can i do to fix it?
for parts: shop.digitallifex.com/products
hello, why does my battery run out so quickly, less than an hour or two after charging it full
+muawiyah haq because the battery in scooter is not real capacity as it shows
+muawiyah haq you should choose LG or SAMSUNG battery
man I have an issue with my hover board ...only one side moves I'm goin in circles can you help me fix it
where's your shop located
+bucky boone Richmond, VA
Question: Don't you have to calibrate the new sensor first? You just replace it, and switch on the board? And that's it?
I got my board and probably screwed up calibrating it. So I never used it.. yet. If I get a new part I do not want to mess up again, hence my question.
+Martin van Wijk you'll need a new logic board if you bricked it
the issue that im having is one of my wheels dos a jerking motion and wont move forward. very similar to this video in the link... is there a fix for this videos here "Broken monorover2/ smart balancing scooter""
hey were are you located at? my board been acting up lately the right side looses balance at random times nd often misfunction any help
+Aaron Madero We are located in Virginia, and we have a repair shop. You can fill in online repairs at digitallifex.com/repairs. If you have any questions, please feel free to contact us at 804-918-0777 during business hours
My hoverboard turns on both on green but when I go on it it would not move whys that reply ASAP pls
once side of my board isnt responding then when I step on it it does but it jerks around
can u make a video of how to fix wheel of hoverboard pls...
The LED light in one wheel was cut off, so when i open it to fix i heard a buzz sound and stop working, and when i open the power i can not close it unless i remove the battery socket
can any body help?
I need help please! When i get on top of my board it just turn off! Why? Please
Hope you are having a nice day. When make power on, both sides blue led lights come on and they stay on. It doesn't move at all. Can you tell me, what is the solution? Eagerly waiting for your Valuable Feedback.
+RUMA BD you'll need two balance sensor shop.digitallifex.com/products
both sides of mine are lighting blue constantly.. cant use the remote is it the censor thats broken?
+khantha420 yes both your balance sensors are broken
don't see any video in how to fix the bluetooth, suddenly one of the hoverboard stop working and now it does not recognize the bluetooth at all, have you experiment such a problem? any videos showing this issues will be appreciated, don't see any at all at this moment.
where can you buy the replacement part?
+FaZe Bong Replacement parts can be found at shop.digitallifex.com
my one wheel doesn't work and that light doesn't turn off what should i do?
+Madeline Salvadore same, did you fix it?
Same, I think this vid shows you how to fix it
+Habeeb Okhai no i sent it back
you hold the on and off button for ten seconds then do the same thing but do it the other way around that probably will fix it
How do I fix mine one side will come on and the board does a 360 degree turn each side is seperatly and my battery side won't come on plz help
both my lights are solid blue. this happened after i tried to calibrate it. i think i put it in a weird mode. anyway out of this. I'm in california. my board was working fine before the calibrate attempt....please help
please help me. Both the lights are green and blue but when stand on it nothing happens. What do you think is the porblem?
5 days ago•
Gyro's inside the board are fried. You can replace them for about $25 each
Gyro's inside the board are fried. You can replace them for about $25 each
Dude, please help me out! Is there a way to adjust the sensitivity of the motor to the foot pads?
hi! switch to beginner mode!
+yaloha, beginner mode?
mine turns off even though it has a full charge!! can u please help ! please
thanks for share.my problem is two pedal in diffiren position to keep me stand.can u fix it?
+Vu Hoang Dieu Anh Hi, we accept online repairs at digitallifex.com/repair - Please fill out form, and we'll send an email confirmation with your order and instructions to send in your repair. If you have additional questions, please call us during normal business hours
+iRepairMD UA-cam can u help me all my boards lights are on but it wont move can u help me please
Hello I have exactly the same problem, but I'm not as good as you by fixing things so do you guys actually fix it yourself if I send you my board? I'm french by the way. Reply to this comment and give me your price please
Yes. Go to their website link in the description
I bought a new motherboard and two balance sensors, but when I turn my board on and try to ride it, its shakes. What do I need to do to fix it?
+liltabuyo your sensors needs to be adjusted please call the store for instructions
Hold the power button for 10 seconds then you will see both lights blink but make sure you have all the board level before you do so and let it sit there for 3 minutes and then power off then it should be fine
Can you fix the Bluetooth board
Hi Bluetooth is so easy fix
so i have the bluetooth version that looks nothing to this hoverboard its slightly bigger but anyways can anyone help me the hoverboard doesn't turn or rotate in a 360 motion to the left but it rotates right so everytime i meet a left turn i can't turn because the right side won't allow me to turn.
How can I bring it in to u to fix
+William Lamboy We are now accepting online repair orders at digitallifex.com/repairs. Please fill out the form, and we will email you confirmation and instructions to send your board. If you have any questions, please call us during business hours
My overboard also do show one light if you turn it on
if i get on my segway the red light next to battery light wont stop beeping and flashing
Hi there my board turns on it has one steady light on the on/off side of board but it will not move at all help please motors do not run at all
+Annette Dartois looks like you have one bad sensor board
+iRepairMD UA-cam do you sell these
+Annette Dartois also would this make both motors not work
yes
Yeh the one I got the sensors am on the 2 controller PCBs and the flat edge of the motors mount is facing down but like this issue one motor works if I tilt the controller's it trys to change direction just can't get em both to run need that balance bypass cus I'm converting a mobility scooter nightmare lol
These balance scooter are a modern marvel
Can you guys repair any balance board from any company?
Yes we can
what is wrong with a ten inch scooter when it shakes real bad when you step on it ?
It isn't calibrated. Turn the board off and on again, only this time holding on the power button until you hear another beep. This means that you are in calibration mode. Tilt the board until it is level and turn it off. NEVER STEP ON THE PRESSURE PADS WHILE CALIBRATING!!!! This will fry your hoverboard's gyroscope, and you won't be able to use it again
I don't have the balancing part