Hi JP do you have a copy of the Luckfox pico pro max original Nand. I chose to write directly to the Nand, because I was having issues with the device running from the micro sd card. However I selected to jailbreak at 9.60 and now although the ps4 is jailbroken it dont automatically run the jailbreak, and the hdd keeps randomly rebooting, yet github states all firmwares are stable, from 9.00 to 11.00, and that isnt the case. I know it's a long shot, but I need to rewrite the Nand back to factory settings. Any help would be much appreciated. Kind regards Andy
Cheers for the print file should come invery useful if I ever need to print one out. Bad experience with AliE my LF arrived badly packaged in a jiffy bag and got bent in transit, so back to the Pi for me.
Followed your tutorial, why mine keeps getting kernel panic after the connection failed notification pops up and never in hen mode yet? i am using ps4 fat 1106 with fw11.0
the only problem i have with the luckfox is you can't pass a wifi signal through to the ps4 like you can with a raspberry pi for stuff like ftp transfers etc
I have a Luckfox Pico Max and it works great with my PS4 Pro 11.00 to jailbreak it. The question I have is my Luckfox Pico Max came with pins soldered onto it. So I have a little foam pad to protect the pins - do you think it will fit in the case with the pins and a thin foam pad? Thanks in advance. Love your videos
Hi mate any chance you can do an update video for the luckfox seeing as the GitHub page as been updated I'm trying to do my PS4 11.00 for the life of me I can't work it out it don't jailbreak it my PS4 works a treat with luckfox but that was before the GitHub page was updated grrr thank you by the way ordered a 2nd case for the luckfox
Is it possible to make a case for pico mini b? I have tried and failed. The problem is i dont have a 3d printer, i sent the sketch to a printing service. So i cannot make fine adjustments.
@@ARG that would be great. For ps4 only (micro sd card way). I think only one side type c is required and the other side the user can drill a hole according to the wires or cable used on rj45. Just a thought, maybe you have better ideas. I see plenty of people asking for this in reddit and forums; not everyone are capable of doing it right. Thankyou 👍
@@ARG you already have a LF pico mini, right? Hmm. Btw, AliExpress is banned in my country (india) so most of the stuff are difficult to source and could get pretty expensive due to import duty. Sometimes electronics can get confiscated as well. Thankyou for the effort.
@@ARG Yes. At least my pico plus has these pins. After printing your case, it seems the bottom is 8 millimeters shorter in height. I can send you pictures if you let me know how.
@@andregrillo961I’m sure you know this but the case is designed for the pico without the header pins so you can remove them either by sliding the plastic separator off and de-soldering them one by one or use snips to remove them. The header pins are useless in the case of using the pico for the ps4 and rather than making a case that has them for no reason I just made the slimmer case.
I have had an issue when I turn it off and then on again the ps4 thinks it was not shut down correctly but I would say once out of six turn offs and on again.
@andregrillo961 I've tried to plug the pico to a power bank, but the issue wasn't fixed.. i am worried that this kind of problem could destroy my hdd :/
Hi JP do you have a copy of the Luckfox pico pro max original Nand. I chose to write directly to the Nand, because I was having issues with the device running from the micro sd card. However I selected to jailbreak at 9.60 and now although the ps4 is jailbroken it dont automatically run the jailbreak, and the hdd keeps randomly rebooting, yet github states all firmwares are stable, from 9.00 to 11.00, and that isnt the case. I know it's a long shot, but I need to rewrite the Nand back to factory settings. Any help would be much appreciated. Kind regards Andy
I don't but let's pin this comment in the hope someone can reach out and help.
Cheers for the print file should come invery useful if I ever need to print one out. Bad experience with AliE my LF arrived badly packaged in a jiffy bag and got bent in transit, so back to the Pi for me.
I just got the case 3d printed for 5 peices it looks so clean and so accurate thanks alot man❤
No problem 👍
Printing mine right now! Thank you for the design! Great job!
Hope you enjoy it!
Will you ever make joystick clips for like, a ps4/ps5 controller?
Yeah I have already made a start on them and they will be coming soon for ps4/5, Xbox one s/x, and switch pro.
Hope you make STL for Luckfox Pico Mini A or B. Thanks sir.
I can just need to grab them and I will make a case for them on thingyverse
When are you gonna make a crystal clear case?
Make sure you watch till the end for a sneak peek of the internal install of the luckfox pico
Followed your tutorial, why mine keeps getting kernel panic after the connection failed notification pops up and never in hen mode yet? i am using ps4 fat 1106 with fw11.0
the only problem i have with the luckfox is you can't pass a wifi signal through to the ps4 like you can with a raspberry pi for stuff like ftp transfers etc
yeah I tested the pi 4 and that is a great feature but pi's are so expensive right now so only good if you have a spare one already.
Looks amazing and looks flush!
I have a Luckfox Pico Max and it works great with my PS4 Pro 11.00 to jailbreak it. The question I have is my Luckfox Pico Max came with pins soldered onto it. So I have a little foam pad to protect the pins - do you think it will fit in the case with the pins and a thin foam pad? Thanks in advance. Love your videos
You will need to remove them, you can snip them off if you do not have a soldering iron.
Good job bro. Case looks clean
just ordered a case from you thanks looks smart good work
Thanks and it’s on its way ☺️
Had my case delivered today very happy with it will order a 2nd one soon for my other PS4 thank you top man
@@paulhudson9990glad you like it and if you want a custom one off colour for the next one just let me know. 👍🏼
Hi mate any chance you can do an update video for the luckfox seeing as the GitHub page as been updated I'm trying to do my PS4 11.00 for the life of me I can't work it out it don't jailbreak it my PS4 works a treat with luckfox but that was before the GitHub page was updated grrr thank you by the way ordered a 2nd case for the luckfox
@@paulhudson9990 I would but my luckfox is soldered inside my ps4 🤣
My black case turned up broken in transit. Could you send me another please ?
Sure just message me Via Etsy and I will get this sorted for you.
@@ARGI tried to send picture but Etsy won't allow me to
Wonderful video Alien ❤❤
Is it possible to make a case for pico mini b? I have tried and failed. The problem is i dont have a 3d printer, i sent the sketch to a printing service. So i cannot make fine adjustments.
I can, do you want it to mod the ps4 ?
Or do you want to use it for other stuff ( need a slit for camera etc
@@ARG that would be great. For ps4 only (micro sd card way). I think only one side type c is required and the other side the user can drill a hole according to the wires or cable used on rj45. Just a thought, maybe you have better ideas. I see plenty of people asking for this in reddit and forums; not everyone are capable of doing it right. Thankyou 👍
@@hsp1316 I can add a hole the same size as a standard network cable.
Leave it with me and I will order one so I can design it.
FYI just ordered one from AliExpress 👍🏻
@@ARG you already have a LF pico mini, right? Hmm. Btw, AliExpress is banned in my country (india) so most of the stuff are difficult to source and could get pretty expensive due to import duty. Sometimes electronics can get confiscated as well. Thankyou for the effort.
What can you do with a jailbroken ps4? Is it the same as a jailbroken nintendo switch where we can download games for free like tinfoil?
Yeah very much the same 👍🏼
can i buy in Hong Kong,thanks
Yes, of course
Looks very cool dude!🔥
Thanks! 😁
Man, your design does not fit the Luckfox Pico Plus model. The plus has longer connectors in the bottom. 😢
Do you mean the pins that go down each side ?
@@ARG Yes. At least my pico plus has these pins. After printing your case, it seems the bottom is 8 millimeters shorter in height. I can send you pictures if you let me know how.
@@andregrillo961I’m sure you know this but the case is designed for the pico without the header pins so you can remove them either by sliding the plastic separator off and de-soldering them one by one or use snips to remove them.
The header pins are useless in the case of using the pico for the ps4 and rather than making a case that has them for no reason I just made the slimmer case.
Does this work with any firmware or specific ones?
not any firmware only up to 11.00 for now.
I don't know if someone has the same problem, but my ps4 pro can't turn properly off with the luckfox plugged in through the ps4-usb..
I have had an issue when I turn it off and then on again the ps4 thinks it was not shut down correctly but I would say once out of six turn offs and on again.
Same here, but in fact anything plugged in the usb ports will cause this in my case (pendrive, external disks..).
@andregrillo961 I've tried to plug the pico to a power bank, but the issue wasn't fixed.. i am worried that this kind of problem could destroy my hdd :/
Great video
stlファイルを頂きました
心から感謝しています
I downloaded the stl file. I am truly grateful.
💪