Is This The Worlds First PS4 Internal Chip Install ?
Вставка
- Опубліковано 25 чер 2024
- In this video, we install the LuckFox Pico inside the PS4 11.00 Slim for the ultimate stealth ps4 jailbreak.
Join the ARG Patreon for giveaways and much more: / jpaliengaming
Install Images: drive.google.com/file/d/1pt2U...
Alien Gaming Etsy Store: aliengaming.etsy.com
Thingiverse link to STL files: www.thingiverse.com/thing:667...
PS4 ExtreameRate shell USE code ARG10 to save 10%
extremerate.com/products/extr...
Luckfox pico links:
Amazon Pico Pro/Max
UK : amzn.to/3KCAAFy
USA : amzn.to/3VfICsN
Discounts from online stores
SKINPIXEL!
10% off anything on the SkinPixel website just click here: shop.skinpixel.co.uk/arg
SNEAK ENERGY!
Grab the best energy drinks today at: affiliates.sneakenergy.com/s/jp
LITNXT !
Grab one of the hottest handhelds today with: www.litnxt.com/?ref=dj0h0upp
UMSOO !
10% off anything on the umsoo.com website with code ARG10
N Sabers !
Get your light saber today: nsabers.com/?ref=jf2mt4dx With code ARG7
ExtremeRate !
10% off anything on the extremerate.com website with code ARG10
BinBok !
10% off anything on the doyoky.com/ website with code ARG10
HexGaming !
5% off anything on the www.hexgaming.com website with code ARG5
PlayVital !
10% off anything on the playvital.com/ website with code ARG10
QRD !
10% off anything on the qrdgame.com Website with code YARG10 - Ігри
looking forward to this vid :)
🎉🎉🎉
Wooooooo
Nice work!
Too bad about not being able to swap the ethernet port.
Nice work figuring out where to solder everything!
Great tutorial man, cheers from Brazil
You're welcome!
Thanks for the video!
You're welcome!
Awesome as always! 🔥
Thanks 🔥
good job.
I was thinking about using the Luckfox Pico Mini RV1103, it would be better, since it doesn't have a LAN port.
same for me, and it's smaller. I'm currently using one right now, planning to put it inside my ps4 pro later.
Great vid! 🎉
Thanks! 😁
I've done this already 😊. Good job.
Awsome, How did you find the install ?
@@ARGhi I haven't wired it internally I thought I will do that after some testing. But I am typically (like 5 of 10 times) getting about 2 minutes (and the least I got is 1min very very rarely and the maximum is 4 minutes). I'm finding it a lot slower because the c++ port of the script was much much faster like 1 min typically.
Am I doing something wrong? Using mini B (the model with flash) and no sd card method which is supposed to be faster than sd card method)
Cheers!
Super tutoriel génial 👍🏼, j’ai des questions avant qu’il soit éteint, durant les 2,3 minutes du fonctionnement du luckfox:
• Est-ce que cela à une interférence ou dangereux (pour le matériel) si ont à un USB de brancher sur la soudure du luckfox ?
• Pareil pour un câble RJ45 relié à notre box internet, est-ce que cela est dangereux (pour le matériel) ? Une interférence ? Le payload ne s’effectue pas ?
Merci 👍🏼
excellent tutorial, thanks for sharing. I have a question. I have the luckfox pico plus. I can solder the ethernet cables underneath the luckfox board to avoid bending the connector pins.
I was unable to validate a direct connection from the pads/pins under the pico and I think this was due to the Ethernet port having some type of logic built in but others have used the pico that has no Ethernet port so it could be possible but I don't know how to do this sorry.
@@ARG Do not worry; there's no problem. As soon as luckfox arrives I will start testing.
I'll keep you informed.
greetings from Chile
Great vid.
Thanks soiltek ☺️
can you make one with rv1103 no sd? use some termofill for the large cable
Why not remove the big head and take the point from the lower side from the luckfox?
would you happen to know which pins i need to solder to on a CUH-1215A motherboard? if so, can you try to upload the pin schematic like you did for this one?
I did see a few people on Reddit have done this to normal and ps4 pros so have a look and if you can’t find it let me know and I will see what if I can find the post in my history.
What kind of wire do you use to solder the connections with the pico. Copper?
I have loads of network cables so I cut one and used the wire from that so yes copper, It also helped with wiring as I used the orange and green twisted pairs.
Is there room to plug an ethernet cable in to the Pico (rather than bend the pins) then strip the cable and solder that to the PS4?
Cable I have has a big plug you know the ones with the rubber shell so that looked to be too big but if you have a small one then yes it should fit also if you have a usb c cable and cut it you can do the same for power.
I managed to get my luckfox pro working but prohrammes like youtube or homebrew store dont work . Ps4 jailbreak though. . raspberry pi allows youtube with no issues . Is it a problem with the luckfox?
So the luckfox is not able to pass through an internet connection like the pi so once you jailbreak the ps4 you then need to connect to WiFi or then plug Ethernet from ps4 to router and set network settings back to lan / easy setup.
Goldhen will make sure the ps4 will refuse updates but after you turn off and on the ps4 if it reconnects it will try and update unless you make sure the auto update is turned off.
@@ARG thanks . Little bit less safe then than the raspberry pi method . A lan cable to the router would lose its appeal as I'm trying to cut back on cables
Not sure if it was mentioned and I missed it but can you still use the ethernet connection after this install?
I use wifi so I will test and get back to you.
Just tested this and yes you can BUT !
This is what I did
Turned the PS4 on from the complete power off state and the network settings had been set to pppoe for the luckfox
After it had done the jailbreak I plugged in the network cable and set the network over LAN and easy option
connected fine and I went on Home Brew store and updated some apps, FTP also worked fine.
Now the network settings would need to be changed back and forth so not great if every time you want to use the PS4 you also need
network connectivity but if it's only to send content to the PS4 via FTP then no big deal.
I hope this helps.
@ARG thanks jp, i was wondering this too. Seems like this might be the best way to use pppwn if someone moves their ps4 around a lot.
Is there any difference between this method and connecting with a LAN cable?
As far as how it works, no difference at all.
It’s just cleaner as it’s all internal but if you can’t solder or you want the easy way then using the plug in the lan port solution will do exactly the same thing.
Do i really need pico max? Other types of pico cannot be use?
You can use others yes
How about installing a laptop inside the PS4?
lol
Could use Pico mini, it is half size without rj45, just pins.
but has it got a network controller so you can direct wire? that is the question.
You can use luckfox without RJ45
@@ViiRoK77the only way to jailbreak ps4 11.00 is with the exploit the flow found and it’s through the network wired connection so ppoe.
Yes you need rj45 connection as no other way to do it unfortunately.
@@ARG you can solder direct
, without the big head conector
@@ARG you can even remove the lan conector, you can use the points below, i just see that can take the 5v an grnd fron hdmi ponts, so you can use short cables
Nope, done them years ago with esp32s
pre 11.00 and the flows new exploit days I take it?
No video, not believing.
9.00 and before had esp32 internal installs also in the really early days we had the "Brazil Method" installs
@@SpooktechParanormalUKoui mais cela n’est pas vraiment automatique, en pppwn avec un Raspberry avec wifi ou luckfox vous avez juste as allumé votre console tous est automatiquement sans rien touché. En 9.00 vous devez allez dans les paramètres guide utilisateur/ infos utiles ou aller sur l’application internet.
Where are all those RED BLUE console info? like the new shops?? Maybe comments are great too. LOL.
not doing that sort of content anymore, Have you not seen all the lawsuits being handed out?
Also currently as far as I know all shops gone and nobody is even thinking of making any new ones.
Echt gar nicht mal so dumm, das Teil zu integrieren. Das ist ein richtiger Fortschritt.
Can we still use gigabit ethernet for FTP installs or will this blow something up if I plug it to my router?
Just tested this and yes you can BUT !
This is what I did
Turned the PS4 on from the complete power off state and the network settings had been set to pppoe for the luckfox
After it had done the jailbreak I plugged in the network cable and set the network over LAN and easy option
connected fine and I went on Home Brew store and updated some apps, FTP also worked fine.
Now the network settings would need to be changed back and forth so not great if every time you want to use the PS4 you also need
network connectivity but if it's only to send content to the PS4 via FTP then no big deal.
I hope this helps.
@@ARG
Could you run a speedtest, I hope there's no packet losses due to this mod.
@@jackipiegg No packet loss as the pico turns off after the jailbreak is done and speed test is the same as before so no difference on that score.