I found it easiest to bind the fc to the taranis using the USB cord. Do this by plugging the usb cord into the fc, then hold the bind button down as you plug the other end of the cable into the computer. Trying to plug in the lipo with one hand is like treading a string through the eye of a needle, but with one hand.
Wow, I'm an IT person by trade but have never built a quad of any kind. This video was excellent. One time through it and flying my quad now. For noobs like me, the next hardware step would be a noob oriented guide to learn how to tune the Flight Controller from a Noob perspective. Again excellent video, you didn't leave any of the essentials out.
+Tiny Whoop Helpful video! Do you know what the ESC/Motor protocol should be set at in the configuration tab? I saw in the manual it was set to brushed, but I saw that mr Steele had set it on 'PWM'. I got MMW Fast motors.
Could you do a video on PID setup for the Tiny Whoop. I have mine setup like you show but it is a little too snappy for my novice skills. I have been told that this can be fixed by adjusting the PIDs.
Awesome vid as always! I've got my bee brain on order due soon from drone Junkie here in the UK. I was wondering if you have any exact specs on the taranis rx in the board? I'm worried that it won't be compatible with the eu lbt firmware that all the UK taranis radios ship with.
hi, i just got my beebrain v1.2 and i flashed it with the latest beta flight 3.1.5 . could you help me tune my quad in acro mode since i think its very sensitive and going all around the place with the slightest stick movements. i'm using the default PID and rates and Expo
Q. How does this compare with a Lady Bird Controller? All in 1 FC , Receiver, ESCs for 4 motors. I am particularly interested in the handing capability of the FETs, what type are they? what Amperage can they handle? F1 board or F3? Pros Cons please. Thanks.
My props spin up way too much when I arm it in angle mode, it almost leaves the ground and I can hardly land. But in air mode it's completely normal and just barely spins the props. I tried clicking the setting for the props not to spin when armed in Betaflight but that didn't do anything. Any idea what setting I need to change either in Betaflight or on my Taranis to fix this?
FauxShizzl just built mine and its doing something like this. It just goes crazy. Now I can't even get bound anymore. I dunno what I've done and need help. Followed this video through and or didn't workout
Help! I have a tbs tango and I bought the frsky JR module and I can't get the thing to bind to the new beebrain boards for the life of me! I bought two!
Great video, thanks Jesse! Can anyone offer me some help: the throttle needs adjusting but I'm unsure what aspect of it needs adjusting. When I arm the quad the motors start to spin despite throttle being at 0 (about 900 when plugged into Beta Flight). The amount the props spin also change when moving switch between 2nd and 3rd position. If that's any help...?
do I need to flash the flight controller with betaflight_3.0.1_BEEBRAIN.hex? if so, what part of the video do you show us how it's done? I can't find it/am missing something.
hey Luke, after a bit of struggling I got the FrSky to sync up with my 9xrPro with an XJT modulr. I'm having some control issues still. trying to figure out if it's the FC, the bind, or the transmitter still, but it flies!
When i switched TAER to AETR it refused to take off... =x Also, when setting the airmode it started spinning the props on arm... very unlike the inductrix but much like a real Race quad =o
Actually- I just sorted it. I had the Tiny Whoop not level in boot- causes the fc to not be receptive to bind. I am bound, radio configed, and netaflight set up now. Waitinf on props and a cam.
Id make a video, but I have been unsucessful at armng the bee with my cheap dxe. I can't get the throttle below 1000; thus it will not arm. plug in ypur fc to betaflight and go into the radio parameters and see if they move. Mine binds, but will not arm to fly.
not hating, its an awesome piece of kit. But if its made for that specific frame, seems weird you have to modify it and have such an uncomfortable bind process...
+TonyFPV It's not running Inductrix firmware anymore so no, it's not going to behave the same. It's going to behave however you program it to in Beta/Cleanflight.
+SoLongSidekick thats exactly my question, does the board has a voltage meter? since it doesnt have telemetry, I think we will have to time the flights in order not to waste the batteries.
i am using the rakon frame and i only screwed in two of the four side...less weight i guess. also if you crash it hard you have to be ready to bend the frame back or it will prevent the prop to spin.
Answered my own question, figured it did but yes It does, settings are a little different. I think you just keep TAER in receiver settings & everything else is the same. I just didn't want to have to install more drivers... I just had a hard time updating Kiss fc firmware because I suck with dealing with different drivers.. So far this thing is pretty cool! It's a lot more responsive, I feel I need to turn down my rates if that's even possible. Ha! I'll get used to it!
+D Nesser You don't have to install any new drivers to use BF if you're already using CF. And as far as the TAER situation goes, Jesse and I think that different Taranis firmware releases do things differently. I had to keep TAER as well (in BF), while Jesse needed to change his.
I realized that as soon as I opened CF. I know there basically the same I just haven't downloaded or used BF yet. I have a cheap laptop I use for tuning Kiss & CF and it's weird about certain drivers so I didn't want to change anything. I use another for flashing firmware.
They're good, do you think they're a little thinner though? I had a set on a 3d printed frame of mine with no prop guards, and they seem to have gotten banged up to a point of uselessness much quicker
+c4pt1n54n0 c4pt1n54n0 They're definitely thinner. They're pretty much just temporary props for me until the standard props come back into stock. Now that the Inductrix FPV is shipping that should be pretty soon (hopefully).
+Dylan Stewart Jesse and I both use TW Race Edition motors, which are in between the fast and insane MMW motors. I love them, they really seem to be a perfect balance.
Was about to buy the motors just now. But saw the beebrain is back in stock. Looks like I'll have to buy that lol. Just going to have to rock the insane motors for now. As you could imagine the battery life I have with 210 mah battery isn't any good. 90 seconds Max was longest I got. Most flights aren't longer than 45 seconds. Going to switch to Losi connector to use some 380 mah from banggood.
two types of impedance here: electrical and physical. the two extra connection points, plus the added weight as well as air resistance created by the extra wiring. you can make a soldering iron out of an old toaster, battery, a piece of copper wire and some insulation. better yet, go buy one for like $15 shipped and give it a shot, its definitely a good skill to have. My local hobby joint even does small stuff like that for free at the counter.
+Mason Garland Are you talking about the recent switch from Picoblade to standard JST-XHP (what TW is calling the "power whoop") connectors? Then yeah, if you want to use those batteries you need to swap the battery pigtail.
thank you Ben, not sure how you do it, but you add so much originality and cool factor to Tiny Whoop
I found it easiest to bind the fc to the taranis using the USB cord. Do this by plugging the usb cord into the fc, then hold the bind button down as you plug the other end of the cable into the computer. Trying to plug in the lipo with one hand is like treading a string through the eye of a needle, but with one hand.
thx
Thanks!
I just finished my build with BeeBrain, it is awesome. Good job. Greetings from Slovakia for all fans.
and just as I was struggling to get my bee brain flying, jessie delivers! great video as always!
thanks Jesse for the video
I preordered five weeks ago. and this is on the way yes.
I'm so exciting
Great Video. Much better in dept on the setup. Thank you. I was looking for this one..
+Bacardiish thanks man!
Wow, I'm an IT person by trade but have never built a quad of any kind. This video was excellent. One time through it and flying my quad now. For noobs like me, the next hardware step would be a noob oriented guide to learn how to tune the Flight Controller from a Noob perspective. Again excellent video, you didn't leave any of the essentials out.
THANKS FOR THE GREAT VIDEO JESSE P. , WHERE YOU ABOUT TO PUT UP THE VIDEO SET UP WITH THE SPEKTRUM RADIO AND THE BEE BRAIN YET? THANKS AGAIN
Thanks man! Sick flying. Love your dive video 👍😊
+Tiny Whoop Helpful video! Do you know what the ESC/Motor protocol should be set at in the configuration tab? I saw in the manual it was set to brushed, but I saw that mr Steele had set it on 'PWM'. I got MMW Fast motors.
Fabien vg Curious about this as well
Lots of people wanting to know about the Spektrum setup video. He doesn't seem to respond to anyone on here ?
Could you do a video on PID setup for the Tiny Whoop. I have mine setup like you show but it is a little too snappy for my novice skills. I have been told that this can be fixed by adjusting the PIDs.
Victor Johansen where did you happen to find Jessie p's pid settings?
Ahh hellz yeah, Gotta love that Old Vine Zin!
Have you had a chance to build one or "tune" one with a Spektrum radio yet??
how soon can we see the Spektrum setup ? I'm excited to get mine setup right !
the music in this makes me feel good : )
Awesome vid as always! I've got my bee brain on order due soon from drone Junkie here in the UK. I was wondering if you have any exact specs on the taranis rx in the board? I'm worried that it won't be compatible with the eu lbt firmware that all the UK taranis radios ship with.
Jesse can you send me the link to the Spektrum setup. I created a model and bound it to my DX6, just need to know how to arm the motors. THANKS MAN!
hi, i just got my beebrain v1.2 and i flashed it with the latest beta flight 3.1.5 . could you help me tune my quad in acro mode since i think its very sensitive and going all around the place with the slightest stick movements. i'm using the default PID and rates and Expo
You are simply the best. Thank you.
ordered two. just hope I can solder on without burning fc. Have a recommended heat. all I have is .03 solder. atm
Does the power plug/cable on the beebrain seem to bottleneck the battery like many say they do on the stock inductrix?
Q. How does this compare with a Lady Bird Controller? All in 1 FC , Receiver, ESCs for 4 motors. I am particularly interested in the handing capability of the FETs, what type are they? what Amperage can they handle? F1 board or F3? Pros Cons please. Thanks.
Where's the video for DSM / DSMX ??
Awesome video! What is the name of the music used in the background?
My props spin up way too much when I arm it in angle mode, it almost leaves the ground and I can hardly land. But in air mode it's completely normal and just barely spins the props. I tried clicking the setting for the props not to spin when armed in Betaflight but that didn't do anything. Any idea what setting I need to change either in Betaflight or on my Taranis to fix this?
FauxShizzl just built mine and its doing something like this. It just goes crazy. Now I can't even get bound anymore. I dunno what I've done and need help. Followed this video through and or didn't workout
When you think to have back in stock the beebrain?, you have props availables on TW store?
Spektrum soon?
I got the Quanum Elite cam ... i disslike the fisheye lens. are there any other lenses ?
Does the beebrain v1 work with the new Inductrix FPV? Just got it and want to make it better and use my Taranis.
How many watts should a soldering iron be for working on these tiny whoops?
Help! I have a tbs tango and I bought the frsky JR module and I can't get the thing to bind to the new beebrain boards for the life of me! I bought two!
Im in same fricking boat. I cant bind and cant find information. Hopefully, someone can help!
Beebrain v.1 won't bind to my taranis plus. Any suggestions on a fix?
Quick question please. Why change TAER to AETR? Why not the normal way?
Got any pid settings with insane motors? Mine are getting a little warm
when will you make a video with a spektrum remote?
Great video, thanks Jesse! Can anyone offer me some help: the throttle needs adjusting but I'm unsure what aspect of it needs adjusting. When I arm the quad the motors start to spin despite throttle being at 0 (about 900 when plugged into Beta Flight). The amount the props spin also change when moving switch between 2nd and 3rd position. If that's any help...?
Do you have airmode on? If so thats how its supposed to be so you can still maintain control at 0 throttle.
Kurtis Towery ah ha that'll be it then. Thanks Kurtis :)
Damn I was hoping for some PID settings
do I need to flash the flight controller with betaflight_3.0.1_BEEBRAIN.hex? if so, what part of the video do you show us how it's done? I can't find it/am missing something.
is there a way to bind it to a eu. version of the Taranis. As there is no way to change the mode to D8
You forgot to mention which side of the frame is the front. For a newbie this isn't very obvious.
There's an arrow..
+D Nesser You must have the strangest Inductrix frame around, none of my 4 have any arrows on them anywhere.
Sorry I thought you meant the FC. But you can tell by the way the battery goes in.
+D Nesser Yeah I know, but this video is for "Total Newbs" and they're not going to be able to figure that out.
I've flown with the frame at 180 degrees, its fine... battery slides out anyway so there's no difference to me
When will you do a Spektrum version?
build a bee version
Which Frsky module will work with the beebrain DJT or the XJT?
hey Luke, after a bit of struggling I got the FrSky to sync up with my 9xrPro with an XJT modulr. I'm having some control issues still. trying to figure out if it's the FC, the bind, or the transmitter still, but it flies!
Upgraded to beta flight 3. Inductrix FPV binds but nothing seems to transmit from Taranis to quad. any ideas anyone
Hey All, Does anyone know if there is an AU distributor at the moment. Nothing on MMW :(
Thank you!
Can the inductrix fpv bind to the QX7?
how do you set up the camera to a VR headset?
what cable do you use to connect to pc? and from where on the board?
isn't that a Micro USB?
Where is the Spektrum version
How to buy this mini tiny Whoop?
Maybe you can do a setup using OpenTX on Horus!
When i switched TAER to AETR it refused to take off... =x
Also, when setting the airmode it started spinning the props on arm... very unlike the inductrix but much like a real Race quad =o
Still hoping for a Spektrum/Orange DSM tutorial... can't gt ny BB to bind to my Radio. May be missing something obvious.
Actually- I just sorted it. I had the Tiny Whoop not level in boot- causes the fc to not be receptive to bind. I am bound, radio configed, and netaflight set up now. Waitinf on props and a cam.
Id make a video, but I have been unsucessful at armng the bee with my cheap dxe. I can't get the throttle below 1000; thus it will not arm. plug in ypur fc to betaflight and go into the radio parameters and see if they move. Mine binds, but will not arm to fly.
i dont have the bind on mine wtf??DID I GET THE WRONG ONE is version 1 different
Seeing this video today got me interested (Again) but still no availability on the boards.... So Sad!
+StarFyter1 they'll be available monday!
+StarFyter1 they'll be available monday!
thanks a lot dude
not hating, its an awesome piece of kit. But if its made for that specific frame, seems weird you have to modify it and have such an uncomfortable bind process...
it will drop from the sky when battery is 3.5v?
+TonyFPV It's not running Inductrix firmware anymore so no, it's not going to behave the same. It's going to behave however you program it to in Beta/Cleanflight.
+SoLongSidekick thats exactly my question, does the board has a voltage meter? since it doesnt have telemetry, I think we will have to time the flights in order not to waste the batteries.
kados mini motors for all you motor and battery needs.
Anyone having issues with the rakon frame?
i am using the rakon frame and i only screwed in two of the four side...less weight i guess.
also if you crash it hard you have to be ready to bend the frame back or it will prevent the prop to spin.
Will this work the same or at all with cleanflight?
Answered my own question, figured it did but yes It does, settings are a little different. I think you just keep TAER in receiver settings & everything else is the same. I just didn't want to have to install more drivers... I just had a hard time updating Kiss fc firmware because I suck with dealing with different drivers.. So far this thing is pretty cool! It's a lot more responsive, I feel I need to turn down my rates if that's even possible. Ha! I'll get used to it!
+D Nesser You don't have to install any new drivers to use BF if you're already using CF. And as far as the TAER situation goes, Jesse and I think that different Taranis firmware releases do things differently. I had to keep TAER as well (in BF), while Jesse needed to change his.
I realized that as soon as I opened CF. I know there basically the same I just haven't downloaded or used BF yet. I have a cheap laptop I use for tuning Kiss & CF and it's weird about certain drivers so I didn't want to change anything. I use another for flashing firmware.
GREEN PROPS!! ME NEED! =D
They're the Eachline props available on the TW store. I have a few sets of red and green and their both stunning.
They're good, do you think they're a little thinner though? I had a set on a 3d printed frame of mine with no prop guards, and they seem to have gotten banged up to a point of uselessness much quicker
+c4pt1n54n0 c4pt1n54n0 They're definitely thinner. They're pretty much just temporary props for me until the standard props come back into stock. Now that the Inductrix FPV is shipping that should be pretty soon (hopefully).
Are there any EU distributors?
i dont believe there is at this point. If you want one from tinywhoop message me on facebook and i'll hook up a small discount
zaqwsx28 there is. The Website is www.fpvlad.com
Hi, my taranis has only d16 and lr12
Which motors do you use ? Fasts? Or insane ?
+Dylan Stewart Jesse and I both use TW Race Edition motors, which are in between the fast and insane MMW motors. I love them, they really seem to be a perfect balance.
Was about to buy the motors just now. But saw the beebrain is back in stock. Looks like I'll have to buy that lol. Just going to have to rock the insane motors for now. As you could imagine the battery life I have with 210 mah battery isn't any good. 90 seconds
Max was longest I got. Most flights aren't longer than 45 seconds. Going to switch to Losi connector to use some 380 mah from banggood.
+Dylan Stewart Be careful, you might start getting some gnarly oscillations from being too heavy.
Red and Black from camera are reversed on the board I just got...careful soldering this part if you are following along.
Good video
Why dont you just use a Y harness so you dont have to solder?
two types of impedance here: electrical and physical. the two extra connection points, plus the added weight as well as air resistance created by the extra wiring. you can make a soldering iron out of an old toaster, battery, a piece of copper wire and some insulation. better yet, go buy one for like $15 shipped and give it a shot, its definitely a good skill to have. My local hobby joint even does small stuff like that for free at the counter.
not to say electrical impedance is non-physical.. not sure what i was going for there XD
uhg...how to turn off that music?
I love whoopin 😁🤣
whats the range
I wanted the tiny whoop for my first fpv drone but i got the inductrix fpv rtf because i was too lazy. i feel like i betrayed my own kind.
No offense! But the music drives me crazy... xD
Are you dutch??
If you are dutch, kan ik dan een quadcopter van u overkopen?
If you are not dutch than never mind;)
Does the power plug/cable on the beebrain seem to bottleneck the battery like many say they do on the stock inductrix?
+Jr Mikulec No it's an upgraded battery cable with thicker gauge wire.
Awesome, thank you!
Jr Mikulec not 2.0jst though. Think that needs to be added on. If not mistaking
+Mason Garland Are you talking about the recent switch from Picoblade to standard JST-XHP (what TW is calling the "power whoop") connectors? Then yeah, if you want to use those batteries you need to swap the battery pigtail.