don't know much about plugs, but it seems lots of people just throw new ones. i think the old ones can often be re-gapped and prepared to return to motor.
Check the left brake hose, usually these hoses collapse inside n force the caliper to stay applied because the fluid does not return to the master cylinder.
Get you a cheap fishnet and put it on the handle they don’t like fish nets the chickens don’t you can hurt them out of your place really easy with that. Specially, if you catch one or two of them in there they’re scared of it.
That groove on the driver's side rotor is factory. They did that on most vehicles, it's there as a guide to let ya know how far you can turn the rotors safely.
Nice work on an old work horse!! is that groove in the middle of the rotor there on purpose so you can tell if they have been turned to thin? Great channel for sure man!
Rip out the seats and carpet,then use a blower for the floors and vents find you two buckets at the junk yard,buy some indo,outdo from Lows with pad,new stearin wheel,call it a day,speaker box,door panels,dash pad ,8 trac
@@GlassWerx these prices keep rising but even this morning, I seen a bull nose ford for $600 up here that needs some work, but runs. They’re out there yet.
@@2StallGarage down here any square body or older ford or chevy brings premium prices. Now obs chevys do to. They go between 5k or more average for obs chevy here.
awesome I have a 79 short bed I am going to replace the brake line on the driver side soon. Would you happen to know what's the length of the line mine was all rusty & broke off ? Staring from the splitter in the front all the way to the hose line ? new to the channel awesome old chevy
Awesome Chevy custom deluxe C10 longbed and I like the fact was a diesel 5.7 and is now converted but still Oldsmobile V8 powered lol I think the channel truck idea is great and maybe some bed or door logos or quotes for the channel used, and would replace the windshield that one is pretty bad I have had a few separate and Fall into the truck why they are badly cracked trust me you don't that but honestly most of were worse than yours.
The truck sounds pretty good! A little work needed from sitting for a while, and some enzyme cleaner/deodorizer Odobon for the rodent smell and you will be a few steps ahead :)
don't know much about plugs, but it seems lots of people just throw new ones. i think the old ones can often be re-gapped and prepared to return to motor.
Check the left brake hose, usually these hoses collapse inside n force the caliper to stay applied because the fluid does not return to the master cylinder.
Thanks Pedro! Will do.
Wow it's been 25 years since I've been in SD. We went to Minot for a week of Racing in 1997. I think we finished 4th
That’s awesome Russell. Thanks again for the live time tonight. I can see you putting in the work. 🔧
Cool old truck, can't wait to see more on this one. Nice to see the chick's running around.great video
Thanks Clyde. They like to make a mess in the garage, but we're glad to have them around. Have a great day. -2SG
Dont forget to oil the hinges before the hood gets bent. You need to do a first wash.
Will do. 🙂
Get you a cheap fishnet and put it on the handle they don’t like fish nets the chickens don’t you can hurt them out of your place really easy with that. Specially, if you catch one or two of them in there they’re scared of it.
Makes sense. Thanks for the tip!
Looks like a great truck, she needs some love, but she will be fine! Can you please make a washing video o washing scene on it?
You bet. We’ll drive it to a car wash soon and clean it up. Thanks for letting us know what you’d like to see. 🔧
That groove on the driver's side rotor is factory. They did that on most vehicles, it's there as a guide to let ya know how far you can turn the rotors safely.
Excellent info. Thanks Mike!
Great project. Great video. I'm newly subscribed. God bless!
Glad you’re here, Mark. God bless you and yours.
Nice work on an old work horse!! is that groove in the middle of the rotor there on purpose so you can tell if they have been turned to thin? Great channel for sure man!
Thanks, Brian, for your support. We just subbed to your channel. Looks like content we would like to follow. Stay in touch. - 2SG
Rip out the seats and carpet,then use a blower for the floors and vents find you two buckets at the junk yard,buy some indo,outdo from Lows with pad,new stearin wheel,call it a day,speaker box,door panels,dash pad ,8 trac
😂 I like it Leo. 🤜🤛
looked like an awesome trip. All that vast openness out there bet u can see the stars great @ night out there.
Thanks bud! The trip turned out successful. I can’t say I didn’t have a little stress headache as I ventured down the gravel at the beginning.
@@2StallGarage o I bet so. Glad to see it going tho. I'd love to fine n old barn find like that that just needs a little bit of work
@@GlassWerx these prices keep rising but even this morning, I seen a bull nose ford for $600 up here that needs some work, but runs. They’re out there yet.
@@2StallGarage down here any square body or older ford or chevy brings premium prices. Now obs chevys do to. They go between 5k or more average for obs chevy here.
@@GlassWerx oh yes, I forgot about that. You told me that before. Silly stuff!
The groove is for the removal of brake dust and lets heat escape so it won’t warp
😎 I knew it was there for a reason!
awesome I have a 79 short bed I am going to replace the brake line on the driver side soon. Would you happen to know what's the length of the line mine was all rusty & broke off ? Staring from the splitter in the front all the way to the hose line ? new to the channel awesome old chevy
I’ll try to get a measurement for you in the morning around 10 CST. I’m working on the front end tomorrow. Thanks for being here. 🤜🤛
@@2StallGarage Man that sounds awesome sir Thanks
Ran into a delay. Stand by Houston 😎
@@2StallGarage kool
Bet it's the mouse house in the heater box burning on the blower resistor
You’re probably right. Still need to check that out.
Awesome Chevy custom deluxe C10 longbed and I like the fact was a diesel 5.7 and is now converted but still Oldsmobile V8 powered lol I think the channel truck idea is great and maybe some bed or door logos or quotes for the channel used, and would replace the windshield that one is pretty bad I have had a few separate and Fall into the truck why they are badly cracked trust me you don't that but honestly most of were worse than yours.
I like your logo/stickers idea. Thanks for sharing your thoughts!
35 in the winter 32 psi in the summer
Okay 👍 Thanks James.
Time to pressure wash the old girl
This week & Ill video it. 👍
اني صادق عند ما قلت بالكابريته مخنوكه
اخي العزيز سيارتك وصخه ريحته وصلت للعراق
😂 it did smell bad.
Should of took it to a car wash on the first drive 🤦
It hasn't been washed to this day. It could certainly use it.
,⭐⭐⭐
Thanks Ray! 🔧🏁
The truck sounds pretty good! A little work needed from sitting for a while, and some enzyme cleaner/deodorizer Odobon for the rodent smell and you will be a few steps ahead :)
Thanks Wes! Have a great Monday.