To disassemble the screen you need to carry out the following steps. I have just replaced mine successfully. NOTE: The back cover of the screen is not glued at all, just clipped.1. There are two small screws that you need to undo first on the monitor where the monitor clips onto the keyboard, Take both of these out.2. Start carefully to pry apart the back from the screen. I used multiple plastic wedge shaped tools and a guitar like pick. You will find that if your screen is already broken that you will probably break it some more but this should not be an issue as this is why you would be pulling it apart anyway.3. Once completely off detached from the screen you can carefully disconnect the appropriate wires (fairly obvious if you have the new screen sitting next to you).
Excellent video, but your title is a little off...you skipped the hole part about the removal and went straight to reassemble. But like I said great video on the "Assemble of a Transformer TF300T".
hi thanks for your video... i need to ask you if you have the all ekt file for tf300t....i can found only the 48.20... i need in particular the ekt file for g03 digitizer
Hi i wanna know if the display on this model is edpecific to asus, i mean, i foun one but doesnt has the revision in the back but still is the same model. (Is for a asus zen pad)
My tablet ASUS TS300 is touchable only on lower and right side. If replace a new screen can fix it? or other advises becuase its price is quite expensive
To disassemble the screen you need to carry out the following steps. I have just replaced mine successfully. NOTE: The back cover of the screen is not glued at all, just clipped.1. There are two small screws that you need to undo first on the monitor where the monitor clips onto the keyboard, Take both of these out.2. Start carefully to pry apart the back from the screen. I used multiple plastic wedge shaped tools and a guitar like pick. You will find that if your screen is already broken that you will probably break it some more but this should not be an issue as this is why you would be pulling it apart anyway.3. Once completely off detached from the screen you can carefully disconnect the appropriate wires (fairly obvious if you have the new screen sitting next to you).
Excellent video, but your title is a little off...you skipped the hole part about the removal and went straight to reassemble. But like I said great video on the "Assemble of a Transformer TF300T".
hi thanks for your video...
i need to ask you if you have the all ekt file for tf300t....i can found only the 48.20...
i need in particular the ekt file for g03 digitizer
What program can I use to create video introductions like this?
Can I replace a N101ICG-L21 REV.C4 LCD screen with N101ICG-L21 REV.C1 LCD screen? (Because of the rev, i don;t know what that stands for)
Hi i wanna know if the display on this model is edpecific to asus, i mean, i foun one but doesnt has the revision in the back but still is the same model. (Is for a asus zen pad)
My tablet is the same of the video btw
My tablet ASUS TS300 is touchable only on lower and right side. If replace a new screen can fix it? or other advises becuase its price is quite expensive
Thanasarn Amponnawarat it is only 35€. ebay
www.ebay.at/itm/151632293538?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Digitizer/touch screen cost like "nothing". around 8-20€ most of the time.
You need to show dis assembly
What's the music?
here is an old touch on this video?
Yan Trufanov