- 12
- 537 374
Alphanet Tutorials
Приєднався 7 гру 2013
Asus Transformer TouchScreen LCD Display Glass digitizer Replacement Disassembly (ALL MODELS)
(ALL MODELS) IN FEW SHORT STEPS QUICK AND EASY
In this video we will show you how easy it could be to repair the touchscreen from an Asus Transformer Tablet in few short steps.
Asus Transformer Book Touch Screen LCD Replacement (ALL MODELS) IN FEW SHORT STEPS QUICK AND EASY
T100TA, TF101, T100, TF300, TF700T, TF103, TF201
1.Step
Separate the bottomcase from the tablet. It has clips and so it is easy for you to separate it. After that please take off the flex cable of the battery and also from the touc screen. Keep care that you don't damage the cables.
2.Step
With hot air you can separate the touch glass from the tablet. You have to know that the optimal temperature of hot air should not surpass 110° (approximately 230 °F).
It would be practical for you to use cheque card while you separate the touch from the tablet because the touch could stick against wit the tablet.
3.Step
At this step you should affix the touch glass correctly. Please make sure that the interior is sufficiently cleaned. Take also notice that the flex cables are affixed. Now you can set the battery in the tablet. Beforehand you should make assurance that the battery is sufficiently loaded.
4.Step
If you are sure that all steps are at your satisfaction than you can fnish the close of your tablet and use it as usually.
1.Schritt:
Das Bottom-Case (Bodenabdeckung) vom Tablet trennen. Es besteht aus Klipsen und ist somit sehr einfach vom Tablet abzutrennen. Nach der Bottom-Case Abnahme, bitte sofort den Akku vom Gerät entfernen und die Flexkablen vom Touch vorsichtig ablösen.
2.Schritt:
Mit Heißluft das Touchglas vom Tablet ablösen. Hierbei sollten man bitte beachten, dass die Heißlufttemperatur 110° nicht übersteigen sollte.
Als nützlich erweist sich auch hier, dass man Karten im Scheckformat als Hilfe beim öffnen des Touchscreen verwendet, da ansonsten die Klebstellen mit dem Touch sich verkleben.
3.Schritt:
In diesem Schritt ist das neue Touch richtig einzubauen. Bitte vorher sichergehen, dass das Touch an der Innenseite ausreichend sauber ist. Auch nicht zu vergessen ist, dass man zuerst die Flexkabeln vom Touch anzuschliessen hat. Erst dann ist der Akku anzuschließen und vorher auch sicherstellen, dass der Akku genügen Strom besitzt.
4.Schritt:
Wenn Sie sicher sind, dass alle bisherigen Schritte zu Ihrer zufriedenheit abgeschlossen worden sind können Sie das Tablet vollständig zuschliessen und das Gerät verwenden.
In this video we will show you how easy it could be to repair the touchscreen from an Asus Transformer Tablet in few short steps.
Asus Transformer Book Touch Screen LCD Replacement (ALL MODELS) IN FEW SHORT STEPS QUICK AND EASY
T100TA, TF101, T100, TF300, TF700T, TF103, TF201
1.Step
Separate the bottomcase from the tablet. It has clips and so it is easy for you to separate it. After that please take off the flex cable of the battery and also from the touc screen. Keep care that you don't damage the cables.
2.Step
With hot air you can separate the touch glass from the tablet. You have to know that the optimal temperature of hot air should not surpass 110° (approximately 230 °F).
It would be practical for you to use cheque card while you separate the touch from the tablet because the touch could stick against wit the tablet.
3.Step
At this step you should affix the touch glass correctly. Please make sure that the interior is sufficiently cleaned. Take also notice that the flex cables are affixed. Now you can set the battery in the tablet. Beforehand you should make assurance that the battery is sufficiently loaded.
4.Step
If you are sure that all steps are at your satisfaction than you can fnish the close of your tablet and use it as usually.
1.Schritt:
Das Bottom-Case (Bodenabdeckung) vom Tablet trennen. Es besteht aus Klipsen und ist somit sehr einfach vom Tablet abzutrennen. Nach der Bottom-Case Abnahme, bitte sofort den Akku vom Gerät entfernen und die Flexkablen vom Touch vorsichtig ablösen.
2.Schritt:
Mit Heißluft das Touchglas vom Tablet ablösen. Hierbei sollten man bitte beachten, dass die Heißlufttemperatur 110° nicht übersteigen sollte.
Als nützlich erweist sich auch hier, dass man Karten im Scheckformat als Hilfe beim öffnen des Touchscreen verwendet, da ansonsten die Klebstellen mit dem Touch sich verkleben.
3.Schritt:
In diesem Schritt ist das neue Touch richtig einzubauen. Bitte vorher sichergehen, dass das Touch an der Innenseite ausreichend sauber ist. Auch nicht zu vergessen ist, dass man zuerst die Flexkabeln vom Touch anzuschliessen hat. Erst dann ist der Akku anzuschließen und vorher auch sicherstellen, dass der Akku genügen Strom besitzt.
4.Schritt:
Wenn Sie sicher sind, dass alle bisherigen Schritte zu Ihrer zufriedenheit abgeschlossen worden sind können Sie das Tablet vollständig zuschliessen und das Gerät verwenden.
Переглядів: 56 732
Відео
Asus Transformer Touch Screen (ALL MODELS) T100TA, TF101, T100, TF300, TF700T, TF103 , TF201
Переглядів 239 тис.9 років тому
In this video we will show you how easy it could be to repair the touchscreen from an Asus Transformer Tablet in few short steps. 1.Step Separate the bottomcase from the tablet. It has clips and so it is easy for you to separate it. After that please take off the flex cable of the battery and also from the touc screen. Keep care that you don't damage the cables. 2.Step With hot air you can sepa...
How to open Iphone 6 Plus - Wasserschaden Reparatur (zerlegen)
Переглядів 39 тис.9 років тому
Iphone 6 Plus In diesem Video möchten wir Ihnen zeigen wie mann ein IPhone 6 Plus fachgerecht öffnet und repariert. Häufig werden Repratur-Videos veröffentlicht, die auf versteckte Schrauben nicht hinweisen! Dieses Iphone 6 Plus wurde im atlantischen Ozean (Florida) aus versehen eingetaucht. Wir haben diesen Reparaturauftrag gerne angenommen und ihn zufriedenstellend ausgeführt. Alphanet KG A-1...
Apple MacBook Pro 13" 15" 17" Apple MacBook Retina 13" 15" Keyboard Cover Silicone
Переглядів 1 тис.9 років тому
Der Silicone Keyboard Cover schützt Ihre Tastatur vor Eindringen von Flüssigkeit und vor Kratzer.
How to change repair MacBook Air Retina Display LCD Screen MacBook Air Display tauschen reparieren
Переглядів 11 тис.10 років тому
In Diesem Video von uns möchten wir Ihnen zeigen, wie Sie bei einem MacBook Air und/oder Retina das Display tauschen bzw. reparieren. www.alfanet.at office@alfanet.at (Zwischen MacBook Air und MacBook Retina liegt in dem Bereich kein großer Unterschied) Achtung! Wir haften für keine Schäden, die durch ein "Nachmachen" entstehen können! In This video we are showing you how you can change/repair ...
How to Change Touchscreen/Display on Asus Transformer TF300T
Переглядів 79 тис.10 років тому
ua-cam.com/video/PiJNjBNV21w/v-deo.html New Video for all ASUS TRANSFORMER(ALL MODELS) IN FEW SHORT STEPS QUICK AND EASY ua-cam.com/video/PiJNjBNV21w/v-deo.html In disem Tutorial-Video möchten wir Ihnen zeigen wie Sie am besten das Display bzw. den Touchscreen am Asus Transformer Tablet TF300 austauschen. Neues Video ua-cam.com/video/PiJNjBNV21w/v-deo.html für alle modelle.
How to replace WIFI Antenna on iPad
Переглядів 77 тис.10 років тому
In diesem Video zeigen wir Ihnen wie Sie die WIFI Antenne austauschen. Achtung! Die WIFI Antenne klebt auf dem Touchglas. Vorsich beim Zerlegen.
How To Open iPhone 5 - How To Repair iPhone iPhone 5 - How Change
Переглядів 33 тис.10 років тому
In unserem Tutorial-Video zeigen wir Ihnen wie Sie am besten Teile an Ihrem iPhone 5 austauschen können. Für weitere Videos besuchen Sie unser UA-cam-Kanal oder auf www.alphanet.co.at
I’ve been quoted £70 upwards to fix mine
love trance😮😮
Bha amar akta asus Tp201sa ar screen broken, ataki paya jabe
Please , I need help : ¿ Where is located the hard disk in a Notebook Asus T100 ? Cant find nothing ... Cant believe this problem ...¿ You know about the location of the SSD disk ? Th anks for your video , easy and clear . Bernardo
Why do these video's never have audio?
Thank you . I have asus t101ha broken touch screen. Is it separate from the display screen?
Yeah, it's two parts. The digitizer/touch screen (the black framed clear panel you see him remove and change) and then the lcd that sits underneath. Much cheaper to only have to replace a digitizer, as opposed to that + lcd.
katgio259@gmail.com possiamo sentirci in privato ho delle domande da farti
Hi i wanna know if the display on this model is edpecific to asus, i mean, i foun one but doesnt has the revision in the back but still is the same model. (Is for a asus zen pad)
My tablet is the same of the video btw
Hi! I had also asus tx201la. My glass was broken also..in this case did it affect also the that the tablet won't turn on?mine is not. I keep on charging but the charging indicator is always in orange color. Please give me any idea about this. Thanks
And who uses glue for tablets and laptops....kinda transgender...
Ok I'm not going to buy a heat gun what else could I use?
You could try to use a hairdryer
I'm about 30/40 phone/tablet repairs in now, I've only ever used a hairdryer. No problems.
Hahah
If I buy a touch panel of T100 is it compatible with my Asus transformer t101ha ??
Doesnt show how to take the back off. How do you take the back off????
Use a guitar pick or prying tool on any of the corners. Has maybe 10-12 little poppers round the edge that just snap together.
Краги бы ещё напялил на руки, ну или перчи кольчужные
Hi Hello, do you have video on how to diassemble the Tab of Asus TX201L? Thank you
Hi!we have the same query..as of now do you have any update on how to disassemble the tx201la?or how was your unit now did it fix already?please let me know.thanks
Definitely not all models. T100HA is totally different. Digitizer comes off in pieces and its glued to the lcd also.
for me the TX300 CA was glued to
I guess I'm the only one digging this music
camera angle is so bad! what is happening you are too close.
Fuck you and your pixelated bullshit video.
stupid presentation, a waste of time, make crazy, his music...
The part I actually need to see he goes too fast on. And his hands are in the way. Useless.
Ehh.... Wenn man das Display abnimmt und danach wieder befestigt, geht der Home Button und der Touch ID Sensor nicht mehr, nur so zur Info.
so ein Schwachsinn
Ehhh... aber wirklich so ein Schwachsinn...wenn man mit dem Flex-Kabel vom Homebutton aufpasst passiert nichts
Hab auch schon so viele iphones komplett auseinander genommen, da passiert nichts solange du keine verbindungen beschädigst
must be really hard opening it up, because he doesn't show that part, probably got his mate to do it
Wish I hadn't made that remark, I feel like a real prick. Sorry!!!
you are aware you can remove comments with the three dots to the right of these comments right?
Very nice !
Followed your steps and fixed my T100TA for $22 (eBay). Thank you! Hardest part was getting the old screen off. I think I just needed more heat to melt the adhesive better...
Perfect!!! Thank you!!!
Hahahah......how much time he needs to put one small screw back...... heheheheh
ummm I couldn't see what you did with the Led panel after you connected the battery.....now the white light is always on and can't press power button
Complimenti !!!!! Ho comperato la batteria asus per tablet trasformers ,non riesco a levare la vecchia batteria,mi spieghi come fare ??? Ti ringrazio e Buone Feste.
The background sound is very annoying
Hi man. Good video. Can you upload a video to disarm asus T100HA?
Worst cameraman I ever saw...
I wouldn't give this guy my iPad or anything electronic, he is too careless, he thinks he's fixing a car. I don't understand why he is in such a hurry, its supposed to be a tutorial
el touch es igual para todas esos modelos es q tengo una tf300t quebrada y una tf700t buena del touch pero la lojica no y kiero intercambiarlas se puede
Salzwasser = Totalschaden ??!!!
Thank you very much - the video was most helpful! Everything worked just like you've depicted it, except that my replacement glass had an additional protection layer on the inside that had to be pulled off. Thanks again!
What program can I use to create video introductions like this?
To disassemble the screen you need to carry out the following steps. I have just replaced mine successfully. NOTE: The back cover of the screen is not glued at all, just clipped.1. There are two small screws that you need to undo first on the monitor where the monitor clips onto the keyboard, Take both of these out.2. Start carefully to pry apart the back from the screen. I used multiple plastic wedge shaped tools and a guitar like pick. You will find that if your screen is already broken that you will probably break it some more but this should not be an issue as this is why you would be pulling it apart anyway.3. Once completely off detached from the screen you can carefully disconnect the appropriate wires (fairly obvious if you have the new screen sitting next to you).
thank you very much.found your video very helpful
I always wonder how you get the glass off and leave the adhesive. I never have such luck..
Many thanks, it was only after watching this that I had the courage to try the repair (it went just as you have depicted it in the video)
I would love to see you put this back together in 8 minutes. Good work, but I am still not stunned. Anyone can open an Iphone. Assembly is the real test yow. Where is the assembly vid?
terrible how to vid
Thank you so much, it's easier to do than it looks.
I recently cracked my ASUS T100 digitizer . I got my replacement digitizer already, and I also got the old glass off. The only thing I need to do is get the new digitizer connected. However, when I tried it, it will not respond. Either the new digitizer is faulty or it could be something else. I do remember leaving the computer on while trying to melt the glue from the old digitizer. I read something about the fuse connection getting burned if you leave the power on while the digitizer is unplugged. Do you think that's what might have happened? Is there anything else that could have happened? How would I go about fixing this?
+etraise2 Exactly the same boat - replaced screen, meticulously, but when completed (and ensured the connector is fully seated and locked), everything works except touch -_- Also, before replacing it, the cracked screen didn't respond to touch, either; though most phones/tables I've used still worked when the touch glass was cracked... By chance, what replacement screen did you get? Did it come in a box saying "Dig Repair" on the top?
You need to order correct part, look on digitizer cable there is pat number which ends with G01 or similar. The ending 3 characters must match for it to work properly.
Yesterday changed touchscreen and all works, like OEM. Only issue that it didn't come with glue so it is not flush and I had trouble to clean off dirt from LCD. Next time I would use gloves and buy "Swellder Sticker Double Side Adhesive Glue Tape for Repair Touch Screen Digitizer". Also important is to disconnect battery or set microswitch on side to [off] position before disconnecting touchscreen otherwise the digitizer fuse can blow and it won't work afterwards without resoldering the fuse.
Others have mentioned a fuse as well. Not only doesn't that make sense, but if the touchscreen controller had a fuse, it wouldn't be enumerated in Device Manager either... right? I searched high and low on mine, couldn't find anything resembling a fuse (marked or otherwise) on the board, even testing various components that may be a fuse - nothing. Also, the part number of the replacement exactly matches the original OEM part. However, they are obviously different; the traces running through the ribbon cable are slightly different (though they appear to serve the same points). I also have a Nexus 7 (2013) tablet with the same style of touchscreen connector, and itself is riddled with touchscreen gremlins. Seems Asus just has a god awful design for touchscreens. On one tablet, a "Dig Repair" replacement worked fine, and on another identical tablet, the same exact replacement provides a completely unusable touchscreen (doesn't detect 75% of the screen).
Matt Falcon First was the power switch still on and the battery plugged in when you detached the original screen? This could have caused a small surge and blown out a micro fuse or some micro electronic piece. Its located near the digitizer cable. You would see a small scorch mark there. You will have to run a jumper to get it to work. Just bypass it with solder. Second you could have the wrong digitizer. There are several models. Make sure the part number matches the old one. Third. the cable could still not be in all the way. check this first. It shouldnt need any type of software upgrade or update to work.
asus tf103cg touch digitizer glass is it same for all model ist really hard to buy this model digitzer in germany pls giv me a solution ? only asus tf103cg touch digitizer glass
u doin to fast and u no said how to fix tha fucking ip go back to afrika
I have transformer book T100-TAR. it looks nothing like that.
Totally inappropriate music and mainly a view of fast moving hands. No help whatsoever in fixing my iPad