Good video but people advertising this trigger as a legal switch is what is gonna make them come after this trigger eventually just like they do every other firearm accessory
Bro i wish y’all stop saying that and being scary. If they wanted to ban the shit they would’ve been did it ! Plain and simple ! Stop trynna tell people what to and what not to say
I recommend getting a 3lb trigger instead it makes ur Glock shoot way faster!!!! I bought a g flex for my gen 3 and it good to have fun with but not to EDC 🔥
I have had nothing but problems with my Glock 19 gen 3, first one after install, slide would not go back on, sent it back and received another one, this one had a silver trigger, slide went back on ok, but I cannot pull the trigger, there is some kind of set screw in the back of the trigger hitting the gun frame preventing travel, it’s the smallest Allen head I have ever seen, not sure what to do with it. No Cust service help so far, left message, no response yet.
You do have to change that extractor out if you are putting it in there. To my knowledge they only make them for the 9mm and the extractors are different you are gonna have issues
On the back of the packaging it list all glock models that are 9mm and .40 s&w. I didn’t know you had to change out the extractor, thanks for telling me me!
Hello God, we pray to Sole by learning and teaching. I am grateful for your presence. Thank you. Now, imma say some more real shit. You are trying to replace tactile learning with visual learning. For example, normally sensei would actually show you. Get close and be like look this is where this goes. Maybe even, they put your hand on the part and show you where to press this down. Suggested solutions: A small ultra high-resolution camera on a flexible neck, with a zoom feature. This setup would allow you to zoom in on the actual parts that need to be connected. Place an arrow pointing to the specific place on the part, to be connected. Place an arrow pointing to exactly where that part is to be connected. Make sure you zoom in so people can see. Please show your struggle, if there is any. For example, if you have to take something off camera to fix it, or make it work. Briefly, show what the struggle was. Then immediately show the solution in detail. As idiot proofed as humanly possible. That's the problem with a lot of these tutorial videos; It's usually a form of self-aggrandizement that detracts from teaching anything meaningful. Or they are just trying to sell you something. So, they will not show the WHOLE set of struggles and solutions that make up any problem(s). Why? They want to make like it was easy so they can look good. Not messy at all. Or, they just want to make it look easy so they can sell you a DYI product online. Your video was very good. I am thusly, inspired to write this comment. These are suggestions that will make your business more profitable in the long run. However, these suggestions will likely require more effort. 💯💯💯✊🏾
Most likely already lubed at the point of contact where trigger bar and connector meet, seeing as it's a drop in trigger.. that's the last spot a dot of lube is needed.
I installed step by step and at the very end my slide stop has no pressure or tension and now I can not at all get the trigger pin back out of the Glock I’m very worried
Thanks for the vid. However, I ordered a G-flex trigger for my Glock 17 gen3 and there was a blockage where I couldn't reinstall the back pin in the grip. Emailed G-flex and they told me to tap on the housing to line up the holes but it still didn't work. Kinda fuggin' up my gun by trying to install this trigger which turns out to be very disappointing
@@ElectricLarry__ did you reinstall the back pin first? You might have to lightly hammer the back of trigger housing in. If no solution works then the trigger could possibly be out of spec and its a factory issue
@@Urban_Tactics i got rid if it. I’m the trigger hads no practicality. And it makes ammo go by really fast. It was fun tho but I honestly wouldn’t recommend
Good video but people advertising this trigger as a legal switch is what is gonna make them come after this trigger eventually just like they do every other firearm accessory
Won’t never become a problem maybe a few can get it these mfs love life easy and no work no worries they like the easy way of the switch
Bro i wish y’all stop saying that and being scary. If they wanted to ban the shit they would’ve been did it ! Plain and simple ! Stop trynna tell people what to and what not to say
@@Urban_Tacticstell that to rare breed. They make triggers like this and the ATF banned em
@@bigtizzleproductions2589 rare breeds are not banned as of today .
it basically is a legal switch tho them boyz aint lying 😭@@Urban_Tactics
Rename the video! It is NOT a switch!
Nah that’s pretty much a legal switch
@@BreezyG4binary trigger is not a switch Lol
Great video young man!!!! I never put in a trigger before and your video made it very easy. Thank you very much!!!
Your welcome
I recommend getting a 3lb trigger instead it makes ur Glock shoot way faster!!!! I bought a g flex for my gen 3 and it good to have fun with but not to EDC 🔥
How you get a 3lb trigger for it? And yea id never edc it. Its just a range toy!
@@Reggiie3x palmetto state armory got a deal right now on the 3lb trigger for 99$ plus tax and shipping I recommend !!!!🔥🔥
I have had nothing but problems with my Glock 19 gen 3, first one after install, slide would not go back on, sent it back and received another one, this one had a silver trigger, slide went back on ok, but I cannot pull the trigger, there is some kind of set screw in the back of the trigger hitting the gun frame preventing travel, it’s the smallest Allen head I have ever seen, not sure what to do with it. No Cust service help so far, left message, no response yet.
Yea i also emailed them, they have yet to respond
idk about legal "switch" don't give ATF any ideas bro but this thing fire and drop in takes 60 or less seconds if you know your glocks.
Just wanna confirm Gen 5 G26 with this thing is fire
@@FUBBA yea they make gflex triggers for glock gen 3-5 for this!
You do have to change that extractor out if you are putting it in there. To my knowledge they only make them for the 9mm and the extractors are different you are gonna have issues
On the back of the packaging it list all glock models that are 9mm and .40 s&w. I didn’t know you had to change out the extractor, thanks for telling me me!
Nice vid, but why would you opt for a heavier trigger with more take up than the default trigger? Genuinely curious, good stuff man
Id never carry this trigger, id only use it for a range toy!! The binary capabilities is far to dangerous to carry in my opinion
@@Reggiie3x ohh it’s a binary trigger duh, I’m stupid. Good vid man
The g flex trigger allows you to spot twice with a single press. When u squeeze it shoots when u release it shoots
Can u show us u shooting this ?
Thank you for the vid man appreciate it
Hello God, we pray to Sole by learning and teaching.
I am grateful for your presence. Thank you.
Now, imma say some more real shit.
You are trying to replace tactile learning with visual learning.
For example, normally sensei would actually show you.
Get close and be like look this is where this goes. Maybe even, they put your hand on the part and show you where to press this down.
Suggested solutions:
A small ultra high-resolution camera on a flexible neck, with a zoom feature.
This setup would allow you to zoom in on the actual parts that need to be connected.
Place an arrow pointing to the specific place on the part, to be connected.
Place an arrow pointing to exactly where that part is to be connected.
Make sure you zoom in so people can see.
Please show your struggle, if there is any.
For example, if you have to take something off camera to fix it, or make it work.
Briefly, show what the struggle was.
Then immediately show the solution in detail. As idiot proofed as humanly possible.
That's the problem with a lot of these tutorial videos;
It's usually a form of self-aggrandizement that detracts from teaching anything meaningful.
Or they are just trying to sell you something.
So, they will not show the WHOLE set of struggles and solutions that make up any problem(s).
Why? They want to make like it was easy so they can look good. Not messy at all.
Or, they just want to make it look easy so they can sell you a DYI product online.
Your video was very good. I am thusly, inspired to write this comment.
These are suggestions that will make your business more profitable in the long run.
However, these suggestions will likely require more effort.
💯💯💯✊🏾
Good job with the installation 👍👍
When you oiled it before putting it together, did you oil where the trigger bar rubs on the trigger assembly? May help?
Ill try it bro!
Most likely already lubed at the point of contact where trigger bar and connector meet, seeing as it's a drop in trigger.. that's the last spot a dot of lube is needed.
Great Installation
I installed step by step and at the very end my slide stop has no pressure or tension and now I can not at all get the trigger pin back out of the Glock I’m very worried
@@demo2258 hit me up on instagram @reggiie3x and i’ll be able to help you out
@@Reggiie3x Yoo i appreciate you reaching back out, luckily I figured it out and got everything to sit correctly, keep up the good vids man🤙🏽
@@demo2258hii of w u fix 😮
Great info. Thanks
Stop calling this a legal switch. They are going to take this too.
Why you open the package like a loud pack though ?😅
Glocks are supposed to run dry my guy. Dot on each rail, and on the hood of barrel where it rubs with slide. Other then that, decent video.
Where did you get that information ?
@@Urban_Tactics from glock
I’m having krazy trouble it’s like my gflex housing is to big it won’t drop in smoothly
You might have to contact support bro! But mine was a lil tight at first to get in so i tapped it in with a lil mallot
I had to trim a little on mine
Please don’t shoot up the neighborhood young man!!
Would the G-flex fit on my gen4 Glock 27
Yessir!
Can a gen 3 trigger fit in my gen 4 glock
Nah
Do gen 3 g flex fit in gen 4?
Nah they make gen specific triggers
W video🤝🏽
🙌🏾
Thanks for the vid.
However, I ordered a G-flex trigger for my Glock 17 gen3 and there was a blockage where I couldn't reinstall the back pin in the grip.
Emailed G-flex and they told me to tap on the housing to line up the holes but it still didn't work.
Kinda fuggin' up my gun by trying to install this trigger which turns out to be very disappointing
@@ElectricLarry__ did you reinstall the back pin first? You might have to lightly hammer the back of trigger housing in. If no solution works then the trigger could possibly be out of spec and its a factory issue
@@Reggiie3x Yes, I did all of that
Do anyone know if it would fit on a gen 2 glock 19
Nah only gen 3-5
Do they ship to front door or dealer?
Front door
Can you go ahead and link the trigger bro?
Sounds like the g flex is just a piece of crap made by a bunch of lazies.
Don't baby your gun covk it
even if he zigzag
Was yours jamming on you?
Yes
@@Reggiie3x did you get rid of it or do you still have it , and is it functioning properly now or it’s still the same
@@Urban_Tactics i got rid if it. I’m the trigger hads no practicality. And it makes ammo go by really fast. It was fun tho but I honestly wouldn’t recommend
@@Reggiie3x smh I’m about to get rid of mine too at this point
You should NEVER use a hammer to remove Glock pins...know wha I saaayyin...
🎉❤❤
fye
no one ever told me this had a 20lbs trigger pull
Yeaa the trigger 100lbs😭 they say after u break it in, its lighter tho
👍🏾
Messy😢
My bigger pen is not coming out 🤬🤬😡
You might have to wiggle the slide release bro, while your hammering/beatin on it.
@@Reggiie3xexactly!!
Now my slide stopper / slide release keeps staying up
but it still shoots but now everytime I have to push that bih bac down that shi lame
will it fit on a glock 30?
Nah, just the 9s and the .40s