Це відео не доступне.
Перепрошуємо.
Silverado-Sierra ,Automatic Transmission Shifter Cable Replace
Вставка
- Опубліковано 27 тра 2014
- Silverado-Sierra ,Automatic Transmission Shifter Cable Replace. If you are having issues shifting in or out of park or L ,your shifter cable may be getting bad.On Silverado-Sierra trucks the automatic shifter cable comes up through the floor and is under the carpet on the drivers side.Because the drivers feet is always on the cable they seem to go bad a lot on Silverado-Sierra trucks. Tried to instal a aftermarket ,Automatic Shifter Cable on this Silverado-Sierra truck but could not get the truck to shift in to low gear. I needed to have this Silverado-Sierra going again so I used the bottom half of the original shift cable. The hardest part is getting the shifter cable through the wire retainer ,that is over the steering column near the firewall. It is not to bad of a job to do but just make sure to remember how the shifter cable is routed before removing the old one. I will use only AC Delco Automatic Shifter Cables for Silverado-Sierra trucks from now on.
wtbm123
car repair
This is literally the best video out there for the shift cable replacement for the Silverado.the newer videos leave so much critical information out
Thank you
I appreciate the video man. Was just stuck in a parking lot because my shifter went loose, and you showed me where it links up to shift, so it saved me a lot of money for a tow. Thanks man!
Glad it helped
Thanks for the video man. You gave me the ability to fix what the mechanic messed up lol. First time in 17 yrs I paid someone to work on my car. Last time as well. Diy
Glad I could help
Thank you!! My truck did this an hour ago and I was feeling complete dread. It broke off but I tied it on til I can get the part from oriellys. You saved me. I was stranded man.
Glad it helped
I did my Dad's 2002 GMC 1500 yesterday and it wouldn't have gone nearly as well if it weren't for the video's I watched here on UA-cam. Thank you wtbm123 for posting this awesome video.
Great video. You explained this very well. I just wish I could have seen this video before the shifter broke from the column.
Chevy blazer sitter stuck in park
Very good video really helpful thanks for sharing big 👍 from Tucson AZ.
Thank you for stopping in and commenting.
Great instructional video - had the same issue at the same spot in my 99 Silverado. Fishing that cable through that bracket behind the driveshaft was one pain in the ass!
Matt Kreider Thank you for watching and commenting
Best damn how to vid i have ever watched. right to the point, and talks about all the little details
WOW!!! How AWESOME!!! I just had an issue with my 2000 Chevy Silv. 1500 not wanting to go into park, or past Neutral!!! My Shifter was loose so I fixed that problem. Put it all back together & still no Park or past Neutral!!! Then I followed the Shift Cable & under the floor grommet. ( Not far from yours!!! ) So I came inside to look up on You Tube To see if I could do this job too... Your video ( & comments) Helped me to see where/how everything gets disconnected, reconnected & Adjusted!!! Thank you!!!
rwk_123 Glad it helped , Thanks for watching and commenting
thanks man. my colorado just up and won't go to park. went down there and looked at the cable... And now I'm here. great video
Hope you get it sorted out , and thanks for watching and commenting
You are a very good teacher. Great job. Thank you.
Thank you so much I woke up this morning to go to work just to find out I can't shift my pos, found that my shifting cable came off from the transmission. For now I just got zip ties until I can properly fix it
Glad the zip ties worked till you can replace the cable.
My 1999 c2500 5.7 with a 4l80e 2wd used a AC Delco pt # 15037353
89.00 plus tax .Fit perfect. Had to adjust to the shortest length, thanks a million for the video, saved me a ton of time . Thanks again
Thanks for sharing
I just went ahead and replaced the whole thing, shifts like new now. thank you
Great bid just the same problem I have right now with my 99 Silverado .thank u very much this is going to help me a lot.I'm going to get started today after work.
Thank you for watching and commenting
Thank you very much for taking the time to make this video. It was very helpful to me.
Elliot Carver Thank you for watching and commenting
had to do this on my 95 Silverado ,my old weightlifting bench press bench came in handy to lay your back on when working under the dashboard.
Glad you got it all sorted out . Thanks for stopping in
Good job Terry
Excellent how to. I had to replace the cable on my s10 and the process was very similar
Thank you for watching and commenting
Awesome video!! Highly recommend using AC Delco replacement. If so be sure to hold both cables together while mating until spring on cable from cab is completely compressed then release only cable from transmission to lock down clip and slide collar back over. Cable is already adjusted if done this way. I don't know if aftermarket is same, but trust me use OEM as this is not a job you will want to tackle anytime soon after.
Defiantly BUY AC DELCO. DONT WASTE YOUR MONEY LIKE ME TO SAVE MONEY. YOU WILL PAY AGAIN. THANKS
There are two cables for your truck.
Identical except for the length.
One is about 7” longer.
The front half is the same length the second half is longer. Probably why you had to use old “second half”.
Great video!!
Yes , thanks for watching and sharing the info.
Hey thanks for this post . Mine wasn't broken but it had popped off that little grease fitting looking nipple under the seat. Would have never found it on my own. Bless you..thanks
Jason Rupe Thank you for watching and commenting
I'd buy you a few beers for this video, thank you
Thank you for watching and commenting
Thanks for this video! I will be doing this in a snowy parking lot later today and this vid is going to help a lot! Thanks again!
Thanks for watching and commenting
Very good. I used it on my 2005 Silverado. Make sure you carefully review the cable routing before you remove the old cable (I did not and had to watch again)
Thank you, your video helped me to fix my Dad's truck
Thank you for watching
Great Video. I liked how you explained and videoed the routing of the cable. Thank you
Thanks for watching and commenting
Good Video Terry
Great video thank you for fixing your truck while looking thru your camera, I know it wasn't easy.
Thanks for watching and commenting
Great how to buddy!
I have a stiff cable in my Duramax that needs changing. Doesn't look too bad but more challenging than the one in my Ford Super Duty. That one is a piece of cake to change
99 Chevy Silverado. shifter cable operates with much resistance. Wondered if lubrication would solve the problem. Will inspect now that this video helped me locate everything.
Thank you some much this video help me to find the right problem highly recommend 💯%
Great detail and excellent video!
+Troy Smith Thank You
For others doing this, when squeezing the black clips (at 5:15 in the video for the steering column, but also underneath), my 97 suburban required pliers and quite a bit of force. And do get AC Delco! Thanks again for the awesome video.
Thanks man I have 99silverado and you helped me alot brother keep the videos going thank you im going to fix my truck now thanks again
cesar Angeles Thank you for watching and commenting
I can not thank you enough. Step by Step i just installed my new cable. With a few adjustments to align the linkage, I am back on the road.
I thank you for watching
@@wtbm123 u know where to find clip that attaches the cables in middle?
Only thing I’m finding wrong with the video is you don’t tell us the sizes for the bolts and screws, aside for that it’s very insightful
Thanks for watching and commenting
Very detailed... great video.
Great video, thanks for making and uploading it!
Thanks for watching
@@wtbm123 e Terri quip
@@wtbm123 will the lower cable push into the upper, without removing the e clip?
i have a 1999 chevy crew cab with the small block 350. this shi jus helped my ass so much
Thanks for explaining why it does this lol couldn’t figure that part out just knew it was broke
Thank you for stopping by and commenting
A great video...thank you, Sir. 🇨🇦
Thank you
WTBM123, Looks like one has to do a lot of bending and stretching to get the cable out and back in.... Good video, thanks for posting
Yes That is true , hard to get comfy and work under the column. Thanks for watching and commenting.
Good stuff Terry.
i had the same problem. thanks for the great video!! very helpful man!
Thank you. Gonna attempt this right now.
shkibeta Thanks for watching and commenting
Very well done! Followed this and had very little trouble. Main problem for me was getting the tab to align with the slot at the steering column end. It kept being 180 from where it needed to be and I couldn't get my hand or any tool in to turn it. Finally removed the junction box and holder and easily put it into place. Still having an issue getting into first but all back together. The video says to lengthen to get 1st but it appears the rubber "O" ring that seals the cable is showing when I do that. I'll keep trying. Again, thanks for taking the time to put this video together! Eldon
+Sandy Dimick Glad it helped . and thanks for watching and commenting
Video was great and very informative, the job was much easier to tackle thanks to the instructions. The only problem that I am having is how to remove the cable connector retaining clip. I have a Haynes manual that shows using a pair of needle nose pliers to pull down on the center tabs to remove it. I can not get this procedure to work. Any help that you can give would be greatly appreciated
Great video...my 2000 Tahoe was really hard to move shifter that's was the problem i ordered the cable before watching video i figured it was the cable ....i ordered the ac delco cable and it fit perfect i set the cable adjustment the same as the old one .....not bad mouthing the video just order the factory cable right on amazon it was cheep the guy who did this video I thank you again for your time in Chicago ill buy you dinner
I agree Use a AC Delco cable here. I tried to stress that in the video ,because the aftermarket ones may be cheaper to buy but not to put on.. Most all of the aftermarket ones i have put on ,do not fit right.
YES BUY AC DELCO, DONT GO CHEAP ON THIS PART. YOULL PAY FOR IT LATER. SPEND THE $200 or more, you can do it yourself under 3-4 hours tops if you have basic tools.
Cool beanzz..didn't look to tough to do..nice video Terry...CJ
Narrator sounds like Karl from Sling blade...made me laugh while I was learning how to do it. Entertaining!
thanks
bullitt65 LOL Thank you for watching and commenting
thanks for this video ill being adjusting my cable based on this info thanks man
Thanks for watching and commenting
well done video; informative and helpful. thank you for taking time to construct this video. barry.
+barry mackaben Thank you for watching and commenting
You know what it a new cable on, but when i shift down, feels like its loose, and wont go back to park, stays at reverse, any idea how I can keep cable tight, and the plastic piece for cable adjustments is so hard to push back in
So I am having the same issue, used an aftermarket cable from O'Reillys. It will not shift onto Park or 1st. I adjusted the heck outa it, no progress, so, I am going to have to spend another 80 bucks to get an AC Delco, I guess. Thanks for video.
Thanks for the info
@@wtbm123 No, Thank You! I looked all over the Utube, you are the only one that published that info. I got the AC Delco cable from Chevy Dealer here in ABQ, NM. Adjusted it to center like you said, and it banged every gear, the first time, just like down town. I was able to get a full refund from O'Reillys, I explained to the manager, it would not adjust correctly. It did not function properly. My girl friends has been very happy and it works perfect. Thanks again. Semper Fi.
Thank u very much. 96 4x4 Tahoe.
Thank You for watching and commenting
Damn the bracket that holds in the cable behind sterring column is tough, having a hell of a time with it right now
Yes that may be the hardest part
@@wtbm123 but I got it, in about 10 minutes when you said fish hook it, I stepped away a minute came back got it right on. I appreciate the video, helped me with my 04 Chevy avalanche 2500, exact same layout
Very helpful made it a simple job thks
Thank you for watching and commenting
Thank you. Very helpful.
Glad it was helpful!
Thanks for the upload.
Awesome video. Best I've seen.
Great video man
Quite informative.
very helpful. thanks for your help!
Thanks for stopping by
Nice Job great info.
thanks for the video helped me a lot!
Thank you for watching and commenting
heck of a how to i would have a time doing that with both hands and your doing it with a camera, nice
great job! thanks
Thanks im gonna go try to do this right now
Hope all goes well . Thanks for stopping by and commenting
awesome job, good guy. thanks
Thanks for watching!
nice how to. Well explained
good video very detailed
Thank you
That was very helpful thank you
Glad it was helpful!
Dealing with this now. Left me stranded in the middle of nowhere,cold and raining. Walked 3 miles to even get phone service.
Hope you get it sorted out .
adding to my earlier post my truck is always on neutral when I turn it off and back on it still remains in neutral. I'll move the lever and it'll just show that it's still in neutral.
thank you for the video. my struck shows that it's on neutral and the shifter will move but it'll show that it's not moving. so Ima check to see if this is hopefully the problem
+Ram San If shifting ok the cable is prob not it , but the indicator is just not moving
I am attempting to find out what fuel line/ fuel line component sits directly above the auto transmission shifter cable underneath the truck. There is a leak I am trying to diagnose and any hint of what fuel line parts are directly above that would be appreciated!
Good info. Thanks Terry.
Great video
Thank you
That did look like a pain, but it should last a loooooong time now :-))
Dont forget to ask wilber to inspect your work he he :-))
Big help thanks for the video
Thank you for stopping by and commenting
Good stuff.
Thanks Thomas dear Sir I am see your video in. Qatar 🇶🇦🤲🇧🇩🇧🇩🇧🇩🇧🇩
Thank you . And Hello .
my 2006 Silverado wont go into park. The cable somehow is now too short. the cable is not broke or damaged anywhere. yes I checked under the floor mat. and I adjusted the cable .
Wonders if un hook cable if it goes into park . probably does . sometimes the cable gets frayed inside and will restrict movement with no out side damage . Please let us know what you find as it may help another sometime . Thanks for stopping by and commenting
@@wtbm123 I replaced the complete cable with OEM . working good now. there was no visible damage on outside of the old cable . but I was unable to see where it snaps together in the middle of the cable . so I am thinking the upper cable was the one that was bad. maybe ill cut it open and see what happen .
Do you happen to know the part number for the gm cable?
thanks
i would assume its the same principle for manual transmissions?
+DJ X 71R3 I believe these trucks with a manual , is a top loader which has no cables
I have a 1995 gmc serria and it won't go into gear. at the steering column you can move the shifter and you can see it move underneath but no drive or reverse it won't move. so it's internals on the linkage that is the problem;? I think. what do you think it might be?
I was driving when the problem happend I lost power on my take off. I came to a stop at light went to go through and u heard a poping noise and it would not go.
@ 0:57 When you said they pop off sometimes, mine has just popped off. But when I try to connect them back together, it seems that I can just pull it off again.. like its missing a bushing or something to lock them together.. What is this called? I need to get my truck fixed before monday for work. I cant find any parts online that have this item
FYI, pull the old one out and measure the full length of it first before ordering the replacement cable. They come in different lengths for standard cab through crew cab. I'm waiting on UPS to bring my second one. I broke the connector on the first one trying to make it work. It was too long🤦♂
Correct .Hope the second one goes well
Thanks, but the second was an ATP. I wouldn't put it in cuz it was absolute junk. I found a genuine GM in town at the GMC dealership that was a return. Finally the right one and it's in and adjusted properly. Spent a small fortune. Forth time's a charm I guess. Lesson learned is make sure your getting a cable for the Allison transmission in your Duramax. Chevy must have put their own transmissions in some the earlier diesels, not sure. Mine is an 2002 LB7. @@wtbm123
I just need the bottom cable replaced. Do yiu know if i connect a new lower cable the the old upper cable will that work since there is a little retaining pin that holds them together? I'm trying to avoid replacing both if i don't have to. I just didnt know if i could add the new upper one later on or if its a pain to get them disconnected once they are locked together
Should be able to i would think.
Can you help with AC Delco part number? 2000 Silvy 4.8 2wd ext cab.... I'm pulling up too many different parts that don't really look like a match. Plus Chevy has apparently changed the part number.... Just need someone to confirm part before I buy one. Thx. Video is helpful.
See ya to the cable support twist clip thing just bent that thing!
Wonders if can straighten or maybe a replacement one . if no old one to use.
2011 chevy silverado..my truck just turned off on me when i put it in reverse..a broken cable would it also prevent vehicle from turning on?
Not sure just how the 11 is set up . but if safety natural switch is not showing park or natural it will not start
I did this yesterday I can't get the grooves from the transmission end of my cable to feed up enough to the other (female) cable to attach that cuppler to lock it in place. Why was it so easy on this video and yet on mine I still couldn't get it to feed in deep enough to lock it in. As of now I am driving with it zip tied together to have enough tension to shift but its not actually fixed until I can get it locked in place. This problem occurred after taking it in to have my rear main seal fixed in which I know the transmission was removed and placed back in.
Hope you get it sorted out
I have the same exact damage on my cable and the floor pan is rusted out and there is no way to secure the cable to the floor pan.
Wondering if I'll have to fabricate some sort of floor pan to secure the cable or will it work just going through the rust hole and hanging there loose ?
It would still work , just make sure it does not rub through on a sharp edge
Hell, as usual I didn't open the box when I bought the cable and of course it was the wrong cable. I hooked it up anyway and just pull and push on the cable where it hangs out of the dash below the steering wheel to change gears.
HA HA
My anti-theft system now.
Great video. Rock Auto doesn't seem to have the cable for my truck though :(
Thank you for commenting
I have a connector under my carpet that I don't know what it goes too. I gutted the interior and don't know where this goes to now that it's time to put it back together. 97 chevy
hey how u doing man i have a question my gmc sierra. 2000 -v6. no 4x4. the transmission. only. goo in reverse. not in d 1 2 3. is not shifting do u think is becuz the cable. o need new transmission???
If the cable moves the shift lever on transmission full travel in both directions , then prob not the cable
Aaron Hernandez hey same here how did you fix it
Excellent!
Thanks