I Put Car Audio In My House
Вставка
- Опубліковано 24 вер 2019
- Showing my car audio setup in my home. I was able to put this together for less than a nice home theater receiver and have been very impressed with the quality and output of sound.
- Авто та транспорт
A double din with back up cam for your front door and the android play store for movies would be a definite must.😉🤔👍👌✌️💯
You blew my mind. Jesus that's a great idea. Bravo sir.
And the gps
When the house is in reverse it'll show the front door. Nice
@@roaringdove636 yup I actually would wire a remote switch so you can check how's at the front door any time you want or when I'm in reverse lol.
@@josephsaucedo8691 that way when you throw the couch in reverse you can see the dumbass at the front door
I was really disappointed you didn't demo it. Otherwise, cool video.
I agree bro I was waiting for it
is on his channel
now I'm not going to watch the video
I never understood why people want to see demos of audio that is compressed on UA-cam and then listened to on low quality earphones. You can't tell what they really sound like in person by watching a video.
Those JBLs are terrible. You're not missing anything.
Great video. I’ve had a setup like this before and it was amazing. Not many people believe you can go this route. It really is a great way to get high quality audio at affordable budgets.
I really admire your wiring.
I got Two 15's, Two 6X9s and Two 6.5's hooked up to a Pioneer Head Unit in the basement, and my wires are not this clean. Everything is sound and tight, they are just disorganized and all over the place.
Nice set up Bro! and Thankds for the Vid
good weekend project to invest in some good connectors/crimpers and re do the whole thing :) those are the best kinds of projects
You have my dream job! In Australia everyone goes to car audio companies. I agree with soundbar being crappy! Excellent craftsmanship! BTW. Oddball sound systems are always interesting to every Audiophile!
thanx for the vid. i have often thought of doing this, now i will.
I’m pretty sure the answer is yes but could you buy a expensive receiver that would do a good job powering your speakers and you can have a center channel as well and support decoding ?
I really like the functional aspect of the upgrading ....this with a touchscreen android radio like the big Tesla looking ones would be sick
Cool setup. I am using two cheap 50 dollar subwoofers in a boxes tuned to around 30hz and surprisingly in room with a little eq they are pretty flat down to 25hz and can go as low as 22 at decent volume I am powering them with PA amplifier (behringer km1700) which is a overkill but i wanted a future proof amplifier.
You can get a decent sound from budget subwoofer if you build a good box
So how exactly did you power the head unit did you also wire it up directly to the power max as well as the amp?
Nice it looks so swell. I have a 15" XFL and a 18" SDR in my room on a 2000 watt Hifonics amp.
I have a 7.2 set up home theater but I don't want to connect my 4 subs in the receiver (scared of damaging it) can I connect them separately like you did but still have sound from the subs?I have 4 kicker l7s 12's 2 in one box for my front corners
This is wonderful! Thank you for sharing! I would lime to find a power source like the one you showed!
I really like this gonna be putting together mine very soon with using the rear camera as a security cam for the front of my door as well .
I think you meant 50 AMPS, not watts, from your power supply.
Other than that, pretty cool! I did something similar to add subs to my receiver using some old Pioneer IMPP 12s, an old Kenwood amp and a 40 amp 12volt power supply.
You know, you could source a Dolby Pro Logic decoder and get pseudo-surround from your TV.
Before I sold my hurricane damaged car, I salvaged some high end speakers, amp and crossover. After seeing your video, I wish I'd snatched the Kenwood Excelon DNX8120 out too. I paid over $1,000 for the head unit alone. But, it is over 10-years old today, where ever it is.
I'm thinking about finding someone locally who builds custom speaker enclosures, since I've got a couple grand in those too.
The amp and crossover I saved are/were good stuff too, but I'm thinking I'd power the speakers more conventionally.
Interesting video! Looks like you do good work.
How do you hook up the charger? I'm actually in the middle of setting up a system in my house, and was thinking about running a 12v motor to a car alternator to the battery to the amplifier,,,but that way looks alot safer...
Sounds great 👍
I borrowed my uncles harman kardon speaker system from his Land Rover discovery td5 and I can’t wait to make a Bluetooth speaker that disassembles into a 5.1/5.2 - 7.1/7.2 surround sound system for home use
I did something similar… I used a DAC, 2 6x9’s, and a Kicker 10’ as my PC sound system.
Nice setup. I am going solar so lots of 12v stuff i'll be using too. Greetings from sunny Jamaica.
Do you loose all your settings on the radio when you hit the switch on the power strip?
The only problem with car subs in home is rattle!
hi, where does all that get the power? 220v to 12 v converter or 12V 30 A power source ? Thx. Have 1 Pioneef top of the line and want to drive it.
I might be a little too late but how did you do the wiring?
Seems like a simple, clean setup. Makes me wonder actually why it isn't more common. I've thought about doing this a few times, but was always stopped on, "How do I convert the AC to DC" to get to the amp? Admittedly, I didn't put much thought past that. Now that I see how to do it, I may in the future try something like this. Thanks very much!
Bc it sucks, thts y it's not more common 😂
Server power supplys
dosent suck but ok @@Sk2PPer
@@whoswho6641laptop power supply to
How does your stereo keep it's memory settings?
Nice setup. I made a homemade Bluetooth speaker using 2 infinity reference 963iix 6x9s in a plywood box and a skar audio ix-10 subwoofer in their prefab box all powered by a 4 channel blaupunkt 1804bt amp and a similar power supply just smaller and it sounds amazing way louder and clearer than any Bluetooth speaker I have heard. I made it for 300 dollars and it blows my 500 dollar JBL boom box 2 away! When doing audio for the tv or recreation I recommend building your own sound system with car speakers. It’s fun, it saves money money, and is usually better sounding than store bought.
I wonder if my blue tooth sound bar connection option on my smart tv will connect to the blue tooth option from the head unit? Both Bluetooth music machines. Could be the same signal
I did the same a while back, but those 6x9 wil sound bad in such a small box, after testing i find 6x9 speakers sound best with open baffle or in a huge floorstander box
especially open baffle sounds good for movies very wide sound stage
Is this possible to do running it off of a home theater system? Or can you only do it with a head unit?
You can run a home set up but to do so you would need a audio control lc2 and a 12v wall charger to power it. To make this possible. It took me a long time to figure out how this could be possible. They didn't have this technology when I first started audio. Hope this helps you 👍👌✌️💯
can i use Bluetooth Speaker Amp Board to connect speaker to radio and a amazon fire stick ?
Just in case y’all didn’t know… you can buy a optical to rca adapter. You have to use your amps when you do that though
I have an old Audi that I’m gonna junk but it has 13 speaker Bose system that I enjoy and don’t really want to get rid of. It’s an optical system and I was thinking about maybe doing this with the system. Would this even be possible? I have no experience but figure it can’t hurt to try considering the other options are junking it with the car or selling it
It be cheaper n easyier to go after market radio and all because therw is no pre outs in factory car stereos the speakers may be old or good but car speakers are so cheap especially used u can get radios and sp ew kers amps and subs with boxes for the price on one home stereo amp
That’s soo awesome!!!!
I love it.
I did mine for 90 and it slaps with a pioneer vsx 3300
Hows the radio powere? From the box as well?
Wouldn't you lose all your crossover settings from the head unit once the power strip is switched off? It would be the equivalent of disconnecting a car battery and losing all the presets in the radio
So nice 👍🏻
Those JBL 12 inch subwoofers are a killer deal, especially when on sale.
How did you connect it to your tv so that you could hear whatever was on screen? Do you have any pictures by chance
Josue Reyes I believe it was the aux cord
😂😂😂 Or RCA
How do you get the audio signal from the TV through it I hooked my system up and it worked but only full blast lol I couldn't control volume with hu nor tv lol I even hocked a rc knob with no luck
Tv usually have a headphone jack. You get an aux cord and connect it to your receiver.
I just got a powermax pm4 75 amp going to an Alpine 600 rms amp and I am getting a TON of ground noise. Any advice?
What is the name of the power supply that you use ?
Mine is a powermax. Mainly because they're easy to find on amazon. But any rv power supply or dedicated 12v converter would work! Rv chargers are just a common application for a 12v converter
the charger is 50W rms? why does that not seem right, or is it different with ac vs dc?
How do you power your stereo?
I recently had my 10" Mirage Omni S10 home subwoofer crap out on me, so since i had some subs and amps collecting dust in the garage, I figured why not? The subs themselves are 12" Boston Acoustics G312-44 in a sealed enclosure and it's powered by a SoundStream Reference 500s (Old school A/B made in USA amp). The amp is running at 1ohm with the subs wired how they are, so they're getting the full 500w between them. To power everything i'm using a 50 Amp Mean-Well 12v power supply with a 5 Farad cap to take a bit of strain off the power supply.
I have same stereo
But the output through pre rca subwoofer is not giving like 3 volt output
Giving very low as you can not listen the bass from subwoofer
Why its happenjng?
Where you get ya speaker from??
Unfortunately car audio doesnt sound great in the home, its designed for well, cars, in turn theres a harshness around 100Hz and the high frequencies are rolled off quite steeply, also car speakers are designed for open baffles, especially 6x9's
Nice...
is there a solution to get cases/boxes for speakers etcs? already made
Amazon
Very nice, but dont you get tired of putting in your presets over and over again when you turn the power then back on?
Most newer radios will retain the hard audio presets, or at least this one does. Even when memory power is cut, it still reverts to the same crossovers and eq sets. Otherwise, yes. That would be a super pain. lol
I want to know about power supply and the sub woofer amp
How many amps is that battery charger?
@manyard's customs how to manage to keep the radio memory after cutting the power supply ?
Please help
Can someone please tell me how to power the actual radio part. I have an amp power supply and sub system I'm planning on building 6x9 things like this but I just don't know how to power the radio
amp?
Subbed and liked 👍 😊. Cheers from Australia
You should do a video demo it
I have a whole system just sitting in my room waiting for another car. I really should just turn it into a Automotive house stereo. I have absolutely everything I need to do it. Except for a capacitor. But I could buy a cheap 500 watt Dual that will do the trick.
you ever thought about replacing the head unit with a 2nd hand home theater receiver with preouts going to the car amp?
This would work. Youd just want to be sure your reciever could handle 4 ohm speaker loads. Also home theater speakers are usually paper cone or lighter material and require less power to drive effectively, so you might need a higher power reciever to drive the speakers as effectively.
@@TheBladeSickness No no . What im saying is . You keep your speakers hooked up to the car amp. You just take the RCA Pre out from the home theater receiver and feed that source into the car amps rca input. Same as you are doing with the car head unit. You right now are taking the rca from the car head unit and feed it to the car amps. You just have to make sure the Home theater reciever Has PRE-OUT on the back.
@@TheBladeSickness he meant use the home receiver as a preamp out only.....Most older yamaha receivers have main...surround and sub preouts if you don't want to use the internal amplifier
I need to get speaker boxes for my 6x9
Nice i like it
I think the subwoofer is not in good position. why you do not put it to the center or somewhere backwawrd of the room ?
how do you turn it on and off ?
What happened no sound testing
What did you do about the remote wire?
Use a switch
How to get the last saved memmory from stereo
What kind of power supply is that
Hello sir which Power supply use in home connect to car stereo who is better car battery and 12v 5amps transformer
Hello! I just used a battery charger meant for an rv. Car audio manufacturers make devices that are similar for this purpose also. Just make sure whatever anp rating you get matches the amperage you need. Add up all the fuses of all the devices you want to power and that is the max amperage you need
niceeee
Why didn’t u buy the DC the o AC Adapter instead of using the battery?
Mine is Pioneer car speakers 6x9 and jbl bass tube for my home avr for the past 8years
That is uh surprising
i am farrrrr from an expert but from what i understand running those subwoofers that underpowered youre more likely to run the speakers because theres not enough air movement moving over your coils to cool them.
When you get your license suspended
So I have a complete car audio set up in my lounge with power from a power supply and battery ....how do I watch a soccer game using the car sound?
U should put 1 subwoofer on each side in sted of 2 on 1 side
Well maybe that's the only place they sound good.
Bass is none directional and it wont make a noticeable difference
How to set it in your room been trying for years
amazing i have a similar sistem and it sounds great🤪
10 inch 2 way technics speakers with a small bass port pack a punch when ran off of a Sony stereo receiver hooked up to the preouts on the back of a jvc car head unit and a graphic equalizer and with bass boost turned on and the bass turned up on the sony receiver the bass from the 10 technics speakers will pack a lot of bass
Why does my base keep cutting on and off
So legit!
I use a dry cell battery to power 3 amp? 11.1 home theater system since every speaker is 4 Ohms it is compatible way cheaper than buying expensive equipment for thousands of dollars
Please make a power supply video
Is there a way I can play ps4 and hear through this kind of speaker set-up?
Never mind Rca's and aux mode 😁 I think I watched too many videos at once lol. Am thinking of making something similar for gaming
Yes! So for example my fire tv plugs directly into my tv and then I just pull aux off the tv and send it to the radio and disable the tv speakers that are internal
Goodwill would have had a better receiver for around $40 and it would have been outputting more than that amp
If you want a cheap setup go thrift it I have an onyko receiver and too onyko bookshelf speakers and a Bose am5 passive subwoofer that for 30$ is not that bad it sounds pretty good (according to my dad)
You can use you the PC power supply
All I do is use the computer power supply for the radio then I use the car battery to power the amp then I just unplug every thing and I just charge the battery
I have a duel sub and 4 speakers and 2 tweeters that i have no use for wanna do sum like this
10 minute video review of a custom audio system, and no demo of how it sounds? You could have added another minute or so at the end playing audio so people can hear it too. Can you do another video to demo how it sounds for us?
Can u do this in my semi
Well fuck man that all sounded nicely put like a get n the wind SHIT
Fast forward to 5 min 30 seconds to get to the good stuff
put two speakers in the back hook like normal except for at the stereo bridge the negative wires together that will get you the Dolby pro logic surround channel although you may want to turn those down and adjust there level in relation to the front so you may need a potentiometer
@Zachary Darner I think I get what you mean, got a question for you, got a minute to spare?
@@dancerehab1092 yes
@@zacharydarner7036 So I have kind of a similar setup, running from my PC though as the source, straight to a 7 band parametric Equalizer that then feeds an old 4channel car amp that outputs 40watts per channel. I run two bookshelf speakers on the amp and they sound so good, so I was thinking since my rear channels on the parametric Eq are not in use and I have a spare speaker (same rating as the bookshelf drives) I can tap audio from maybe the right/left channel on the EQ's rear output straight to the amp then run the third speaker as a rear speaker behind my couch. I'm aiming to kind of 'fill in' the stereo with sort of a 'center channel'. Would love to hear your thoughts..
@@dancerehab1092 ideally you would put two speakers back there in the same position as the front ones but in the rear and maybe toed in a little bit or if your couch is close to the back wall then turn them sideways facing the left and right of you if you cannot turn the rear down in the receiver then you might need to use a potentiometer but if you do this you will get the Dolby ProLogic surround channel it sounds great.
images.app.goo.gl/XoaoSm1c1BhTNt2x9
of course with a rear output all you need to do is hook the negatives together on the back speakers you don't actually need to run it off the front channels
What you were wanting to do won't be adding a center channel that would be if you had the proper receiver it would sit in the middle of the left and right speakers and provide all the dialogue but with the method I recommend all the dialogues comes out the speakers as normal
@@zacharydarner7036 That's perfect, I must admit you got me at the poor man's surround sound hahaha. I have understood all that you just said, so right now I will have to hold on and get an extra matching speaker and a potentiometer then I will just run the feeds from the empty two channels. I also need to get a proper sub probably much later on.
Why can’t you just use a 12v dc wall adapter?
Bru u should of played sum Music 😂