Restoring a VERY neglected 'mystery' full squish
Вставка
- Опубліковано 8 лют 2022
- Today, I don’t even know what we’re restoring. None of the original labels were on this mid 2000’s full suspension bike, but it turned out to be a diamond in the rough. We break this bike down, restore it to its former glory, and sell it to someone who will put it back on the trails.
Free yourself from the algorithm and join us on Substack! 🚲 bermpeak.substack.com
Videos 2 weeks early • Exclusive articles • Discussions • You’re in control!
The Berm Peak Ranger Station on Airbnb 🏡 www.airbnb.com/rooms/50301108...
To figure out what bike this is, you need to find one that matches
wheelsmfg.com/derailleur-hang... this derailleur hanger #49
The brake levers were dated 2006, and the fork damper was dated 2008
This bike looks very similar to the Santa Cruz Heckler, and Superlight. However, the cable routing and rear triangle design are very different upon close inspection.
The Diamondback Atroz also looks almost exactly like this bike, however the derailleur hangers don’t match, and the rear triangles have significant design differences.
The Cannondale Rush looks very similar as well, and indeed the cable routing matches. However, the Rush uses a different derailleur hanger and has noticeable design differences all around the bike.
Tent Paint Booth amzn.to/3rCCHjQ
Cassette amzn.to/34q8RpS
Chainring amzn.to/3B6eC84
Berm Peak Hoodies, Beanies, Jerseys, Shirts
cognativemtb.com/collections/...
Check out our second channel for "express" videos / @bermpeakexpress
Instagram / sethsbikehacks
Facebook / sethsbikehacks
Music in this video is from
share.epidemicsound.com/trQSg
Join my Patreon and 100% of the proceeds go towards projects in the mountain biking community. We recently finished Berm PARK, in Canton, NC. Help maintain it and fund future developments while getting behind the scenes info!
Learn more here / sethsbikehacks
Video explaining Berm Park • We're building a publi...
www.chestnutmountainnaturepar...
Advertising disclosure: All of these videos contain products, logos, or mentions associated with Diamondback Bicycles. Whether or not the video itself was sponsored by Diamondback, they do support this channel, and by extension, every video on it. - Спорт
Pell’s Ridelight was an expensive bike, it came in four (4) models: Pro $1,200 US, Elite $1,600, Race $2,300 and Team $4,450 USD! It appears the bike that Seth was restoring was the Ridelight Elite. Whoever got it for $525 got a great deal.
charles the detective's got it!
Damnnn you good well done detective, just searched it and found it.
Nah Man that's a Santa Cruz Superlight
@sge4r513 No, it really isn't...
It actually is an early 2000s Santa cruz superlight which does look a little like the pells ridelight
Dude if this whole flip bike thing is going to be bigger you definitely need a ultrasonic cleaner. I wish I had bought this earlier for my motorcycle workshop.
What cleaner do you use?, Best thing I've found is the purple simply green industrial degreaser, it cleans almost anything.
@@silasmaxwell6745 I use vinegar personality for anything rusted, let it soak for 30min and the rust will come right off. For dirty parts I’ll wash them with mean green and spray them with WD-40 to get them shining like new. Easiest cheapest way I’ve found.
More useful videos without expensive tools
@@masonjohnson1987 CLR in the ultrasonic works great for rust.
i came here to say the same thing
What I love about Seth is that he will never be satisfied with a half hearted job, he will always to do it to the best of his ability and it’s really great to watch.
◈◈
Thats why you should never restore and product you are passionate about. You will spend way to much time and money one it, compared to what you get back in sales
@@04dram04 The whole point of passion is enjoyment, And he enjoyed restoring a bike back to full glory back onto the trails and made a couple hundred bux in the process. What's the issue?
This may be a stretch, but hear me out. Back in 2006 there was a store called Backcountry Outdoors that lived under the giant salamander at Pisgah highway (this store has since moved across the highway and I believe is now the citadel called The Hub). They used to sell some home brand mountain bikes which from my memory were simple single pivot frames like this. Given where you live and the age of this bike, it is possible it came from there, which would be pretty cool!
The fork is from 2008 tho
@@midastico could be a 2008 model or the forks were upgraded
@@fetB yeah true
The Harvey bike!
This was more of a rescue than a restoration, love seeing bikes get sent on the trails instead of to a landfill!
Bike rescue indeed.
didn’t even realize this was just posted. love the videos seth. you got me stoked to try mountain biking after i stopped bmxing as a teenager finally 4 years later i got myself a mountain bike and have been riding loads
you should feel lucky man. same story here but "15 years later" so i didn't get to ride in my invincible 20's lol
9:50 I've been a bike mechanic for a year and you just taught me how to more effectively use these guys so thank you. No more fiddling around trying to route the magnet end from the outside!
This series, as well as other channels like comet restoration and old shovel, set a great example for a world where instead of repairing things, we tend to throw things out and buy new. I love watching these for tips.
Paint job on this one came out amazing, definitely shows what you can achieve at home with patience and a bit of prep!
And a heated garage the size of a house... ;)
A bit of prep? A damn full couple days worth of a bit of prep.
@@Adroit1911 that's the patience bit 🤣
@@BenHaskell oh I thought that was the watching the paint dry part. That's where I always mess up, every paint job I do has my fingerprint in it. Some might have gotten buffed away though. 🤔
This looks like a late 2000's Diamondback Recoil. My only hesitation in saying that's definitely what it is, is the added gusset on the seat tube. But that may just be present in large and up size frames.
In addition to the seat tube gusset, I also see differences in the shape/design of the rear dropout space, as well as the rear triangle's "seat tube", both where it connects to the shock and also to the frame.
The head tube is to long to be a diamondback recoil
Looks like a recoil to me 2008 or 2009.
It also might be an old yeti. Pretty much everything before 2005 looks exactly the same though so who knows.
@@bobohunter1776 yeah after looking up more pre 2010 bikes, the frames are all very similar.
Love your flip bike series! Doesn't get old no matter how many times I watch it!
Hey Seth,
My family and I recently got into the sport due to our oldest daughter having been diagnosed as pre-diabetic. Naturally, we started on big box bikes... Mine was definitely too small, I constantly felt like I was going otb. I stumbled across your videos while researching the common mods to make big box bikes tolerable and have found the flip bike and parts bin upgrade series' particularly inspirational. I found a Giant Pistol 2 (full squish circa 06) at my local used sporting goods store priced at $40, had an employee test ride it and it didn't shift so I scored it for just $15! I immediately returned my big box bike to order a new derailleur, hanger, shifter, chainring, chain, brake levers, stem, bars, spacers, pedals, grips, crank tool, top cap & star nut. I even pulled and greased all the bearings and IT TURNED OUT GREAT! So much so that my aforementioned oldest daughter asked why she still had to be on a big box bike and if I could build her one as well. 😅 I know I'll likely never stumble across another $15 full suspension Giant, but I was thinking the Northrock xc27 (mfg by giant) could make a quality, yet inexpensive platform on which to build her a good intermediate hard tale by adding a 1x drivetrain, air fork and hydraulic brakes.
thats sick!!!!!
I love these! I learn a lot from each one. They’ve helped me rebuild my old hardtail and build a budget fatbike. They’re both way more than they started as and they’re now prized possessions. Keep it up!
This bike would have been better if he replaced the brakes with Shimano MT200: cheap and reliable.
Absolutely enjoyed the heck out of this video. From the commentary to the choice of background music... Just a really good video. Thanks for the hard work.
..im turning 49 this year..and still love to ride bikes especially on the trails because of you Seth..love your videos❤️👍😊😉
Bike saver! Love witnessing the restoration process! I still have my 2002 Bianchi Boardwalk. Old bikes are awesome.
These videos make my day 10x better.. Loving this series seth!
Sick, love the rebuilds!
Looks like a Santa Cruz Heckler. Awesome video! Keep them coming!
Great video. Love your outlook on keeping budget limits in mind and making things work. That bike was a work of art at the end. Glad to see it come back to life!
Dude. I love these videos. 🤘 Thank you for this series. I have been “refreshing” old bikes for a while now. I would like to be able to turn a profit, but have not been able to figure that out. Either way, I will keep doing it cause it is so much dang fun. Watching your videos makes me feel validated in my efforts. Thanks for this series, it is my favorite.
3:48 YES! I love that you got a spray “booth” and (even better) a n95 mask!
Just saw this, amazing video man
I love you're showing people your progress in flipping bikes and also teaching people how to come up with ways on how to make bikes in generally better without buying new parts
I am restoring a Marzocchi DJ Comp fork right now, and this video helped me confirm that it is a grease only fork based on the exact same internals as yours, as always, Thank you Seth for the information and the entertainment. I am hoping to visit NC in the future and have even been looking houses around Asheville and the surrounding area. Cheers!
You could use the old bike for the thumbnail, it's fun to watch the video until the end to see how the bike end up looking
Good suggestion!
Seconding this.
Actually a great suggestion. Upps the intrigue a little more!
Man, I really like this series! Epic restore man, looks like a real nice bike now!
Excellent re-build, thank you!!
This has to be my favorite restoration! Graphite was absolutely the right choice. Nice job!
Great Job!
always a good day when seth uploads another flip bike
Always love watching yr restoration. I ended up restoring my 1996 Giant ATX840 last year. My 25year old bike is now almost brand new with all new parts. Next change is to upgrade the cable disc brakes to hydraulic brakes. Yahooooooo!
Well Done again! Loving this "bike restore" series. You are a good man Seth for bringing all these bikes back to life, and then you turning around and selling them for quite a bargain. You are pillar for the biking community. The work you do on these bikes is very thorough and complete. I know of no bike shop as thorough and complete as the work you have done in all your bike restore videos. For some of the work you have put in, the local bike shop will charge at least $500 per bike for just the Labor Alone. Heck even a basic tuneup with really no work involved will be charge $100 these days for just the labor alone. A Bike Build where a shop builds up a brand new frame and uses brand new parts will be at least $250 these days; and the work you do is about 5 times more effort than that!
I really like this series. It has inspired me to buy a used bike for my son and restore it for his birthday.
Seth you should to timed runs with all the bike flip bikes on the same section of trail before and after to see what the upgrades do and compare the flipped ones to previous flips
Seth wouldn't fit on half these bikes so I think it would be a bit unfair!
Most bikes don’t ride when they are new
Yes
Kinda hard in this case, considering the tires and chain were completely busted. But in theory it could be an interesting addition to the format, I agree. Even if quite often it would be a DNF before.
Looks like someone wants to see Seth get killed 😆
Thank you for this content. This was a great build and video. I plan on getting my first full suspension bike soon.
Love your passion for the bikes. When I was a teenager, we lived near a county dump, I'd pass by periodically on my bikes and pick up some decent bikes. I sanded and painted them though. I never sold a single one, gave some away and had a few to myself. It amazes me how people just discard nice things. Brings to mind the old saying "one man's trash is another man's treasure!"
Old school! It’s hard to overcome that geometry though. Love the restoration!
29/27.5 fork and 27.5 wheelset
@@plokmko0 ?
@@plokmko0 It's a 26" frame, so no.
It’s looks like an old mongoose. The rear swing arm design looks extremely similar to the older mongoose models.
Imagine paying $325 for a mongoose in that condition 😂
@@corradovanaken3553 mongoose used to have some bikes that were high end here in the states. I think they still sell good quality bikes in other countries but we get the trash Wal Mart stuff for some reason.
Mongoose used to have high end bikes I have one
@@Willysworkshop they still do! I’ve been contemplating getting their DH bike it’s a very good deal
@@Madmehican in Australia it's really only their BMXes that r good
You are the Bike Flip g.o.a.t., my friend. This one is one of your best!
Seth you're so good at restoring these old bikes, great job 🤘
The feeling of watching a bike gets restored is unexplainable!
Try restoring one - even better! I never knew I could fall in love with a machine.
Greetings from Australia. Love the series. My 10 yr old is fkn obsessed with it. We are currently rebuilding his new 2nd had 24" Giant MTX. It'll be the only 24" Ive seen with a true 1x on it. haha.
Kudos man. We salute you.
That looks fantastic! That's sweet!
That paint job turned out fantastic!
I really don't think you should stress about selling it. Leaving the sale for the next episode is a good hook and it's much more satisfying to see the bikes sell for a decent price.
watch till the end
Absolutely love the geometry of this bike. Whoever made this bike must have literally made this frame one single year and then never again. That rear triangle swingarm shape is so unique, cant find it anywhere!
Diamondback recoil. And yea it was a bad design mines rear swingarm snapped on both pivot points on the right side when I bunny hopped off a 2ft hill and I was only like 145lbs
Really love what you do, keep up the good work
Thank you- I have been looking for a solution for spraying in my small shop, I had no idea there were pop up spray tents. Came for the bike entertainment, left with much more.
Those other bikes can be some nice flips. That DK tracer is still worth a couple hundred. And that hardtail, turn that into a rad little dirt jumper. This was a nice rebuild on that full suspension.
It definitely looks like it could be an older diamondback atroz especially with that rear triangle design
The Atroz looks very similar, but the lower section of the rear triangle (near the pivot) is plated over on the Atroz. From that era there was also no internal routing through the chainstay.
@@SethsBikeHacks its really bugging me i cant figoure out what bike it is now 🤣
I think it’s a Jamis can’t call the model out but looks like one
I thing GT had a similar bike back than, but idk to be honest
@@itaymazor9335 in all honesty just about every full suspension from around 2010 looks pretty much the same
Dude, love your videos! Very well edited and work. Neat concept!
This is my favorite Flip Bike so far!!! It looks so good!
Yes another flip bike video we want more of these
IT is a PELL's RIDELIGHT Elite or Pells Thor FS150 Elite from 2009 it was a 1500 up to 4000 USD MTB. Frame is 100% same but components are differents.
I think you nailed it...exact same rear triangle. Slight difference on the seat tube gusset and front triangle top tube/down tube gusset but that could be size specific. Finally...this has been driving me nuts.
@@mosslager thanks :) Yes the frame Is definitely the right one. It was an expensive bike for the time :)
How did you figure it out?!
Yup, you nailed it. I guess you're Czech? Don't believe Pells were ever sold in America. Most have been bought off eBay or somewhere online.
Nailed it!
I freaking love this series!
You are a Super hero on this channel 👍
Love this. It's not just about the $$$ profit, you've reduced the need for a brand new bike by 1, and all that entails in terms of aluminum production, assembly, and transport. Cycling needs to be more sustainable and restoring bikes this way is a big part of that.
Let me tell you... This flip bike series has me buying up old bikes and flipping them. I flipped my way up to a brand new bike for the wife, started off with a $150 bike, sold it for $400, bought a full suspension GT for $200, flipped it for $550, bought her a brand new $900 bike for $600 on offerup, swapped out a bunch of parts with quality parts from the parts bin and shes in a $1200 or so rig right now from my initial $150 investment.
I’ve been doing the same for years and just recently one of my local bike shops liked what I was doing and offered me a job. Now I have all mod cons at my disposal after hours and can flip bikes a little easier.
Keep up the passion mate.
Yes! Finally another episode! Keep em coming!!
Mad respect. not everything has to be new and the best tech to ride. Not everybody is pushing the limits of their components. Some kid will be stoked.
Looks like my Rockrider back in the day. But I think many brands used this same mold for their cheap full suspension bike.
Also they kinda ride like shit because of the single pivot and the chaingrowth. Mine had a really good air shock back in the day and was feeling like a pogo stick, no matter what the shock was set to. :D
I think it's the same frame. They're very popular in my country
Single pivots are the best. The only time I notice chain growth on my heckler is in the granny ring, when I want it to stand up straight anyway.
@@Metal-Possum Yeah expensive singlepivots are good. The orange bikes are also loved by many. But these cheap single pivots just dont feel refined
@@timmlpsk Refined? Mine was "Refined" when it was brand new in 1996... It flexes a little, but that doesn't bother me. With its Super Deluxe coil shock it just behaves like a champion. Pivot placement is obviously key, if you're running a triple like I am, then in line with the top of the middle ring for a neutral feeling on the trails. I even commute on it occasionally and it's just as fast as my commuter bike.
You are right that single pivot feels kinda like pogo stick but i cant agree they ride like shit. It depends what you expect. They are very sensitive, even on small bumps and nothing can beat it. I got some old rusty frame with super old rock shox sid for 20$, restored it and that thing is sooooooo smooth. Riding downhill in the forrest feels almost like asphalt road :D
the full squish appears to be a 98 Santa Cruz Heckler
It looks more like a heckler version 5 because they switched to a more square linkage with the version 5
Looks more like a Decathlon bike. Rockrider
the 98 Heckler had a different connection at the seat post and would have mounts for v brakes. NO WAY it's a 98, maybe a newer version?
cant be a heckler at all, they all had brackets external for cable routing. video shows clearly this bike never had those. internal cable routing through rear triangle.
Its not a 98 Heckler, and I dont think its a v5 heckler either - the rear triangle looks different.
"Sweat equity" ... love it! Perfect description.
Beautiful! What a sweet ride.
A Suntour damper in a Marzocchi fork?! That's certainly interesting
Suntour made/makes the dampers for a lot of brands, i heard even Öhlins uses suntour made dampers
It’s surprising how much stuff Suntour actually makes. At the time they may have sold dampers to Marzocchi.
Suntour actually bought Marzocchi in August of 2008 (then sold it in 2015 to Fox), so thats why it has a Suntour Damper
Suntour makes stuff for almost everyone. Similar to Sunrace in the drivetrain world eh, Seth?
Suntour OEMs for a lot of brands, including Rock Shox and DVO.
Crazy restoration! I would have just sprayed some WD-40 everywhere that looked old and been done with it 😂 Great job!
WD-40 is not good for bikes. If you get it on the rotors they will be ruined. It's not a lubricant, it's designed for water displacement (that's what WD stands for)
damn, Seth. You can restore bicycles like no one! I'm always impressed how you can turn garbage into pure beauty
Glad there is biking videos here again!!!
There is REAL value in amateur mech’s getting a chance to do all this kind of work on a bike, where if you screw up, it’s not the end of the world. But seriously Seth - can you do a video on painting bikes? Who are you using?
I love this series Seth. It would be cool if you start purchasing some high-end vintage bikes that were neglected and restore them to their former glory.
God damn that bike is so sick. Awesome work
Such a great video! God I wish my Mt bike was never stolen, even a bike like this would get me riding with my friends again. Such a beautiful job
I'm hooked on this story. I had a small fleet of Rocky Mountain bikes going back to late 2000s and I think this is a late 2000s Rocky Mountain prototype! Rocky Mountain was handmade in Canada at the time and experimented with rear linkages quite a bit. The square tube was used on their thrust-link design for downhill bikes like the RM7 around the same time, but I can't recall if it had internal cable routing. I think this might have been an attempt to lighten the design for XC use.
Also, the stem cap and handlebars are "RMB" - I believe this is the Rock Mountain house brand for generic parts, which they used extensively in mid-2000s too. Not to mention tru-vative stem and WTB wheels were staples for them at the time too.
Seth mentions they used nice parts across the bike; a prototype engineer would have had the means to access these parts for a frankenbike like this.
And yes: the wheelsmfg #49 hanger crosses to Rocky Mountain #7 ;)
Seth, we need a follow-up video on this one!!!
Damn, Seth should be pinning this
We looked into Rocky but didn’t find anything that looked like this. Maybe it was custom?! The serial number starts with BC, could that be a clue?
@@SethsBikeHacks That's too much of a coincidence to not look in to further! I think their production bikes all start with PR. They've done some high-profile prototype builds in the past... I'd drop them an email and see if it's theirs?
Curious to know too... do you think the paint was original? Spray paint? Any evidence of decals?
@@SethsBikeHacks it's a Rockrider Btwin 6.3... Look them up. Frame is exactly like this one..
EDIT, Pell ridelight, somone in the comments got it
Not sure, but is it possible to replace the rear triangle, and combine 2 different frames? or is it how it came from factory? The forks could also have been a second purchase somewhere in it's 12 or so year life.
Really enjoyed this build! Great vid!
This is awesome to watch!
What happened to the other bikes Seth? I need the story of all of them, especially the BMX one because it looked good.
That’s what I’m saying!!! That Subrosa is worth at least a couple hundred.
Really enjoying the Flip Bike Series Seth. One suggestion I have is wearing appropriate respiratory protection while spraying paint. Paint vapor/fumes are really harmful and I don't think anybody wants to see you get sick making these videos.
Hey man I just gotta say... The overall video quality is top notch!!👌 I've been watching since pretty early on. Not to say they were bad before but they are way better then what they were! Keep it up man, I love them!!
What a strange bike, mechanical brakes paired with a Chris King headset?? Also I recognise those rims, my old 2008 Cannondale hardtail had those! A very strange mishmash of parts!
It seems to have had a storied history for sure
We should ask Gordon Freeman, he must know.
The swing arm looks extremely similar to a iron horse but the frame looks like a diamondback
Brooooo we need more of these flip bikes videos. I like these types of videos.👍🏻👍🏻
Wonderful restoration
me encanta tu trabajo, ok, enhorabuena
looks so close to the 06-07 santa cruz heckler my brother had. could be a 07 cannondale rush or gary fisher procaliber 07 as well.
I love watching these videos. I don't have the patience to do fancy upgrades lol. I still ride around on my '94 Marin Palisades Trail and '93 Nishiki Backroads.
Great restoration
Hey Seth I love all your videos and I know you hear this all the time but I am your biggest fan
Stan
No I am
@@GGwp-kw1zq hater
My best guess is that it was a "big box" bike from a store like walmart or something and the kid that owned it raided his Dad's parts bin for "upgrades". There were so many single pivot frames like this that were stickered up as random brands like Reebok and Mongoose.
Well done sir! I like what your doing!
Looks like a Berm Peak special to me which makes it priceless knowing the shenanigans involved. If I had saw this I would have bought it.
I've seen a couple older santa cruz bikes that look really similar to that frame. One was a heckler and the other was a blur. If I were to really try to guess at it I'd say it looks like a blur frame that someone rebuilt and added more aggressive parts to at some point around 09-10.
I think you're right. 2003 superlight maybe?
@@michaeldouglasmason could be. It did sound like there was a serial at indicated it might be an '06. But, it does sound like it's got parts from multiple years on it.
The blur used VPP so definitely can't be that. The early hecklers looked very similar, but hecklers from this time frame look vastly different.
@@michaeldouglasmason Afte doing some more research, I think you're right. The closest bike I could find is an '03-'06 superlight. The rear triangle looks a little too beefy on this bike and the pivot point seems a little too far forward, but it's very similar. The only other bike I found that looked similar was an '06ish Haro.
I found that the Santa Cruz Superlight model from that time period looked very similar, at least judging by the frame. Components do not match as well though, but maybe the bike you flipped was already upgraded. Anyway sick build as i expected!
Or any early Santa Cruz Heckler!
Another vote for an early Santa Cruz. Rear triangle and dropout design are spot on.
@@BYin541 true it looks even more accurate!
The finish on that bike looks really nice👌
Dude love this series😎
Your spraypaint coats are too thick. There's lumpy buildup in some spots. Thin coats, barely thick enough to be opaque, are mandatory when spraypainting unless it's supposed to be a textured paint like "hammer finish" or "truck bedliner".
Good to know about the Park magnetic cable fishing tool. I really could've used that back in 1998. I had to drop a piece of weighted thread through my swingarm and carefully tilt the swingarm until the thread dropped through the exit hole. Took me a good 30 minutes.
EDIT, Pell ridelight, somone in the comments got it
Nice work !
Bike restoring can be a nice hobby
I wish I lived closer to ya, to buy these builds! Love these videos you always do an amazing job!
It's a santa Cruz heckler