After a 2 year hiatus, I'm back! Enjoy the video! The Fendt 943 Vario MT sure is a nice machine, check it out in action! #farming #fendt #tillage #spring #tractor #2024
Hey, I am new to your channel. I farm in germany and drive Fendt since my father brought our 924 vario home in 2001......I was 13😅. The transmission in our 924 is not really different from what you drive, just the controlls got a bit fancier and the monitor bigger.....and we have wheels on ours😂. I drove this controll system you have in a 724 vario 2 years ago and I think it is the best from Fendt. The new Fendt one is nice, but I needed half a day to get along with it.....they changed everything and it is too complicate in my opinion. Nice to see how other people farm around the world. Everything seems to be a lot bigger where you are😅.
Thanks for watching! I won’t lie, it’s fun to farm in this area, it’s a beautiful area with good land so I’m pretty spoiled to be able to run this equipment in this area! The Fendt impressed me, I’m very used to JD equipment so this was a fun change of pace/scene
Definitely could, but we go with that specific size field cultivator for transport reasons! It’s narrower and not as tall as the bigger cultivators. 55 ft cultivator @ 6 mph = 40 ac/hr 44 ft cultivator @ 8 mph = 42.67 ac/hr
We farm in the Missouri River bottom in Holt, Buchanan, and Atchison County Missouri and in the hills of Holt and Nodaway County Missouri. Our farthest north farm is located just 3 miles from the Iowa border in Nodaway County MO!
It is a fendt tractor with challengers heritage. You can definitely see challengers contribution in the track system and overall build. All the while is has Fendts refinement and finish, which is a great combo
I guess these use the Finnish SISU engine, not the Chinese/Brazilian/Argentinean ones..? Would probably have gone with Claas myself to get away from AGCO, but to each their own...
@@riverbottomfarms9493 You can save two speeds C1 and C2. If neither C1 or C2 is selected and you put the Variostick to the right side, the tractor will hold the current speed.
If you watch our channel more you’ll get to see that we like Deere but also appreciate the other brands available to. Last fall we ran a new 7500 Claas combine with a geringhoff corn header. Really liked that machine also, those who aren’t willing to try new things must be willing to compromise with nothing more than what they have today!
Hi I’m in the Uk and drive little Fendt’s on wheels a few years old. You could have programmed it to drop the cultivator in and go to a set speed using one button. Also what revs you’d want to turn at on the headlands plus loads of other things if you want to.
so glad to see you filming again!!
Hey, I am new to your channel. I farm in germany and drive Fendt since my father brought our 924 vario home in 2001......I was 13😅. The transmission in our 924 is not really different from what you drive, just the controlls got a bit fancier and the monitor bigger.....and we have wheels on ours😂. I drove this controll system you have in a 724 vario 2 years ago and I think it is the best from Fendt. The new Fendt one is nice, but I needed half a day to get along with it.....they changed everything and it is too complicate in my opinion. Nice to see how other people farm around the world. Everything seems to be a lot bigger where you are😅.
Thanks for watching! I won’t lie, it’s fun to farm in this area, it’s a beautiful area with good land so I’m pretty spoiled to be able to run this equipment in this area! The Fendt impressed me, I’m very used to JD equipment so this was a fun change of pace/scene
Nice looking Fendt tracked tractor
That it is!
Great video! Thank you and all the farmers for a job well done!
Hey, I’m getting paid to do what I love to do, I almost can’t call it a job at times! But thank you for watching!
Hello from Queensland Australia 🇦🇺……just found your channel
New to your channel, great video! Keep up the great work.
Nice vid! Btw I’m your 200th sub!
Thanks for subbing!
@@riverbottomfarms9493 you bet! I binged all your videos! I have no clue how you only had like 200. Keep up the hard work!
Nice looking tractor! Looks like you almost ran out of def 😂
Just subscribed by the way...😁
Thanks for the sub!
Thanks for the video.
With the power that the engine is using to pull that cultivator, could the tractor be pulling a wider one.
Definitely could, but we go with that specific size field cultivator for transport reasons! It’s narrower and not as tall as the bigger cultivators.
55 ft cultivator @ 6 mph = 40 ac/hr
44 ft cultivator @ 8 mph = 42.67 ac/hr
@@riverbottomfarms9493 Thanks for your reply.
I like to see wide span machinery behind a tractor to get the job done faster.
Hi from Australia
Awesome video mate, have you considered demoing a VT implement to work on the clumpy conditions.
Stay safe...😊
We have a 40’ Great Plains Turbo Chopper also, we’d definitely like to try a turbo max in the future!
Looking forward to seeing the video in the future, perhaps your kocak dealer can arrange a demo unit...😊
C-130 four fans of Freedom! Where do you farm at? I'm in south ia.
We farm in the Missouri River bottom in Holt, Buchanan, and Atchison County Missouri and in the hills of Holt and Nodaway County Missouri. Our farthest north farm is located just 3 miles from the Iowa border in Nodaway County MO!
If it aint a deere it must be a fendt!
some people i worked for went to a turbo till max where you could change angle the blades as needed on the fly for places like that or fall ruts
There are times where that would be nice, maybe one of these days one of those will show up! 🤷🏻♂️
Sounds like you need to try a high speed disc since you have the hoursepower
13:08 what do you want me to say????😂
Oh come on, a young strong guy can't climb the ditch. Lol Nice video.
Sometimes I just do things for the thrill!
Where are you located??
We’re located in the furthest NW counties of Missouri! Right where Nebraska, Iowa, Kansas, and Missouri all meet
Even if it is green and says Fendt on it, for me it is and remains a Challenger.... 🤔🤷🏻♂️
It is a fendt tractor with challengers heritage. You can definitely see challengers contribution in the track system and overall build. All the while is has Fendts refinement and finish, which is a great combo
I guess these use the Finnish SISU engine, not the Chinese/Brazilian/Argentinean ones..? Would probably have gone with Claas myself to get away from AGCO, but to each their own...
Where yall located at?
We’re in far NW Missouri where Missouri, Nebraska, Kansas, and Iowa all meet
Damb chick weed. it grows in frost
Set your speed on the screen and then just push joystick to the right and et goes to the set speed
I did do that and enjoyed that feature! It would definitely be a nice feature when running a grain cart in the fall
@@riverbottomfarms9493 You can save two speeds C1 and C2. If neither C1 or C2 is selected and you put the Variostick to the right side, the tractor will hold the current speed.
Don't need a Deere if you got a Fendt.
If you watch our channel more you’ll get to see that we like Deere but also appreciate the other brands available to. Last fall we ran a new 7500 Claas combine with a geringhoff corn header. Really liked that machine also, those who aren’t willing to try new things must be willing to compromise with nothing more than what they have today!
Hi I’m in the Uk and drive little Fendt’s on wheels a few years old. You could have programmed it to drop the cultivator in and go to a set speed using one button. Also what revs you’d want to turn at on the headlands plus loads of other things if you want to.