Fully Supported Pistol Barrels??
Вставка
- Опубліковано 20 жов 2024
- In this video we will go over the myths and truths to what people call fully supported barrels for the 1911 pistol. If you have any questions leave them down below. As always have a great day from the Fusion Firearms Family!!
CHECK US OUT ON FACEBOOK!
-Facebook Tech: / bobs1911bench
-Facebook Info: / fusionfirearms
CHECK OUT OUR INSTAGRAM:
www.instagram....
Music: artlist.io/ - Наука та технологія
When speaking about supporting brass it is good to remind people that the case is soft and will expand on ignition. If the chamber is too tight the case will get stuck in the barrel and the ejector will be stressed and may break.
Good information, thanks for sharing
Listening to these Fusion tech videos is making me a Fusion fan. Good stuff.
Glad you like them!
Loved this video!!! You broke down all the "misinformation" about supported vs. non-supported barrels in a short, but very concise video. Thank you!!!! Plus, the "fly" outtake was hilarious!!!!
Glad you enjoyed it! More to come and thanks for the support!
great information, as always!
:)
Thanks again!
Thanks for filling me in. Gonna pick up a ten soon from you been doing my research and looks like ya got my business
Hi Greg, Thank you for the super comments and thank you for the business!
Been saying this for years. Ya have a feed ramp with a hitch in its get along or you have an integral ramp. Still youhave x amount of case hanging out the back on the bottom. Some folks get hysterical about a 9x23 with a standard barrel. I think they are lacking spatial perception🤓. Tell me where I’m wrong.
You are correct..... I am actually doing some 9x23's today for customers, No ramp, fusion match barrels.
I AGREE WITH YOU IN GENERAL, HOWEVER MY 1911 RAMPED 40 SUPER WITH A BOT5TLE NECK CARTRIDGE IS FULLY SUPPORTED.
Super, You have a very special unit then....
Hello, can you please point me to the video where you discuss pros and cons of ramped vs standard barrels? I'm looking to build a frame that can accept both 9mm and 45 ACP uppers, which I think can only be done with a ramped barrel, but if ramped 45 ACP barrels are unreliable, I can build two frames instead. Thanks!
I would build 2 separate pistols. You have too many parts to change out from 45 vo 9mm, such as ejector, slide stop, stop plate and more. For 9mm I would suggest a ramped barrel 45 does not really matter. Even the 9mm will feed fine with an un-rampped if set-up correctly.
Nice to know
So I have a Fusion Freedom Series Long Slide 10mm can I shoot the Buffalo Bore ammo out of it it has standard non ramped barrel
Yes, you can, For heavy loads just use a heavier recoil spring such as a #22 or #24 LB.
Great content! Barrels ordered from you guys, still need work?
Excellent, let us know if you need any help..
The kit I purchased years ago did need work to get the pistol tuned. It was short chambered & needed the hood fitted to the slide. All was minimal work. Turned out to be an accurate pistol.
So why is there tons of old fogeys on forums saying that throating your berrals on a 1911 it's stupid and it should never be done?
Because they probably went too far one day and F-upped a barrel or 2 barrel. And yes, there is limits to the process
Was wondering why my ramped kahr wouldnt feed the old federal hollow points while my unrampted 1911 will eat anything. The Kahr is supposedly higher quality than my shooters arms manufacturing 1911. Thank you so much atleadt i know why now. The jahr cw45 will only feed the polymer tipped roundnose hp.
For feeding there is a lot to take into consideration, It is just not about barrel geometry. You have to look at the entire mechanics of feeding. Barrel is a part but not everything. You need to look at extractor tension, barrel throat, barrel ramp or frame feed ramp, breech face, ejector(Possibly, but generally not), Slide stop, Magazine, bullet geometry…..So, you can see there is a lot in play here. See our feeding video’s here on UA-cam.
Can you recommend a gunsmith school?
Sorry, Not really. Most are very general. It will really depend on what you want to specialize in or if you just want to be a general gunsmith doing repairs.
Does your longslide freedom 10mm have standard or ramped barrel?
Standard, you can order it with a ramped barrel as an upgrade if you wish.
I want to order 1911 colt barrels can be sent to Indonesia ??
You need an exporter to help you