How to Swap Clutch on a E36!! DIY

Поділитися
Вставка
  • Опубліковано 16 жов 2024
  • Finally I got to change the clutch on the BMW E36 316i beater!
    Really fun to try and do most of the work myself!
    Check out the Autodoc website for parts to your car:
    Phone: interstitials....
    PC: www.autodoc.co.no?FahreFilms
    Also check out their youtubechannel for a lot of installation video:
    / @autodocno
    Denne videoen har aldersgrense A tillatt for alle.
    In this episode I show you how you can change clutch on your car. My car is a BMW E36 four banger 316i with the M43B16 engine! So cool to do this myself and properly work on my own car and fix it! Hope you enjoy the video! a lot of work has gone down to both the 2 days of fixing and the video :) Leave a like and maybe subscribe if you enjoyed it? Have a good one
    Follow me on Instagram at FahreFilms for daily updates

КОМЕНТАРІ • 62

  • @FahreFilms
    @FahreFilms  5 років тому +18

    My biggest fix on a car I have ever done, so proud of myself! Hope you learn something from this video. Slap a like on it and subscribe to join the family! Who`s excited for winter and snowdrift?

  • @FredM-bw6qx
    @FredM-bw6qx 2 місяці тому +1

    will be replacing my clutch this week, this my first job done on the car by myself! thank you for making this:>

  • @bradcomis1066
    @bradcomis1066 3 роки тому +3

    You should also lubricate the clutch release lever at the two pin points and at the throw out bearing.

  • @FahreFilms
    @FahreFilms  5 років тому +8

    Spoiler, the install begins at 3:00 ! Enjoy some good timelapse goodies

  • @Vnk_Rukitis27
    @Vnk_Rukitis27 5 років тому +2

    I think you need to straight pipe this beater!!!!👌👌👌

    • @FahreFilms
      @FahreFilms  5 років тому +1

      Vnk_ Rukitis Don’t know, want to be silent daily drifter 🤷🏼‍♂️ no need to piss of more people 😂

  • @Nico_335i_DCT
    @Nico_335i_DCT 5 років тому +6

    Nice upgrade. Btw was the pilot bearing still ok? Normally you change the pilot bearing when replacing the clutch. And has the 316 compact a single mass flywheel? Because the clutch you' re using is a single mass flywheel plate🤔

    • @daily3686
      @daily3686 5 років тому +5

      I think he just dont know what he is doing :D

    • @FahreFilms
      @FahreFilms  5 років тому +2

      Daily 36 No clue😂

    • @bradcomis1066
      @bradcomis1066 3 роки тому

      It must have already had a single mass installed. The old clutch disk has springs on it.

  • @AdamAus85
    @AdamAus85 4 роки тому

    Same problem here in my 98 318is. I'm actually gonna sell it and not sure if worth it to change it.

  • @drawingcorrupted2905
    @drawingcorrupted2905 5 років тому +8

    Will you straight pipe the e36 cabrio

    • @ManOfAttitudeLP1998
      @ManOfAttitudeLP1998 5 років тому

      Scale Beyond pls

    • @FahreFilms
      @FahreFilms  5 років тому +1

      Does it need it? It sounds perfect ✌🏼

    • @M3LKS
      @M3LKS 5 років тому +1

      @@FahreFilms Agree, bmw i6 straight piped sound horribly raspy, not a pleasant sound.

    • @drawingcorrupted2905
      @drawingcorrupted2905 5 років тому +1

      @@FahreFilms of course it needs it darling

  • @Kanpiakseli
    @Kanpiakseli 2 роки тому

    What year model is that E36? Do all E36 316i compacts have single mass flywheel & hydraulic clutch?

  • @aaardyyy
    @aaardyyy 5 років тому +1

    Very good video, enjoyed watching👌

  • @tobiasandreassen6356
    @tobiasandreassen6356 5 років тому +3

    But the compact still need some lowering springs or coilovers

    • @FahreFilms
      @FahreFilms  5 років тому +1

      Tobias Andreassen coming sooner than you think! 👌🏼

  • @bengrissom5713
    @bengrissom5713 Рік тому

    lil peep and his oldschool bmw melts my heart

  • @torujuri5064
    @torujuri5064 5 років тому +2

    Short shifter ???

  • @shultz4877
    @shultz4877 5 років тому +4

    How can that beater only have 180 k km?

    • @FahreFilms
      @FahreFilms  5 років тому

      Shultz it’s mint bro!

    • @shultz4877
      @shultz4877 5 років тому +1

      @@FahreFilms Don't you feel bad about to witner beat it when it's so mint? xd

    • @FahreFilms
      @FahreFilms  5 років тому

      Shultz Haha it’s a joke it’s not mint. bought it for 700euros so no worries😂👌🏼

    • @shultz4877
      @shultz4877 5 років тому +1

      @@FahreFilms my 04 e46 coupe even has more km on clock😅

  • @zeromaster21_official
    @zeromaster21_official 5 років тому +3

    it needs more views

    • @FahreFilms
      @FahreFilms  5 років тому +1

      Kentkenny 👍🏼👍🏼

  • @blackterminal
    @blackterminal 2 роки тому

    I've lowered a transmission with the car on jack stands and caught the transmission in my arms. Not something I recommend.

  • @mfundoradebe2149
    @mfundoradebe2149 2 роки тому

    so you don't bleed the clutch as you do the brakes?

  • @franciscomiguel258
    @franciscomiguel258 4 роки тому

    How mutch time did it take to swap the clutch?

    • @FahreFilms
      @FahreFilms  4 роки тому +1

      Francisco Miguel First time for me, maybe 6-7 hours of working. Used 1 night and a morning to be done 👍🏼 It should go by alot faster if your better than me, I’m slow.

  • @drawingcorrupted2905
    @drawingcorrupted2905 5 років тому +1

    First day of fall 2 days ago!!!

  • @goshospasov3243
    @goshospasov3243 5 років тому +4

    You have to bleed out the system the clutch will be harder

    • @CityHunt3R911
      @CityHunt3R911 3 роки тому

      So it wasn't the clutch, it was the air in the system?

    • @bvd2551
      @bvd2551 3 роки тому

      shouldn't have to if you just unbolt the slave

  • @konradfossandahl1826
    @konradfossandahl1826 5 років тому +1

    Du treng ikke bytte starter hvis du skrur den opp og bytter en del når den klikker sånn som den gjør. Ligge på UA-cam

    • @FahreFilms
      @FahreFilms  5 років тому

      Konrad Fossan Dahlø nja kosta så lite med ny, var en knekt del på den 😅

  • @pistonheart143
    @pistonheart143 5 років тому +4

    Straight pipe it :D

    • @eliask6180
      @eliask6180 5 років тому +2

      it does not sound good on that small 4 cylinder. didnt even sound good on my 520i 6 cylinder. Better on my 525i. The bigger the displacement, the better it sounds.
      on this compact it will sound very "wannabe"

  • @theodordenstore3398
    @theodordenstore3398 5 років тому +1

    First like love vidio 🇳🇴🇳🇴🇳🇴🇳🇴🇳🇴🇳🇴🇳🇴

  • @blackterminal
    @blackterminal 2 роки тому

    You were lucky having it on a lift

  • @nicob3526
    @nicob3526 5 років тому +3

    Prøv å lufte clutchen 🙂

  • @ioanvoicu3414
    @ioanvoicu3414 3 роки тому

    beautiful work, but 1.6 is not worth it

  • @gordythecreator
    @gordythecreator 3 роки тому

    Awesome! Glad2Find you guys. Subscribing now, so I can see how you EuroBoys do this e36 318is I just bought. Actually would like a way to contact you later

  • @serkanaldinov5288
    @serkanaldinov5288 4 роки тому

    Turbo

  • @31acruz
    @31acruz Рік тому +2

    Stop calling it a 'beater', show more respect for that series of car which are becoming valuable and expensive. Clean it up and start restoring it.

  • @Dbbs3bg
    @Dbbs3bg 5 років тому

    Still dont know why u keep investing in this ugly thing

    • @FahreFilms
      @FahreFilms  5 років тому

      Bakkestuens Mekk Me neither 🤷🏼‍♂️😂

  • @mikelavish
    @mikelavish 6 місяців тому

    Completely breezed over disconnecting the shifter linkage 🥲