The switch only blew up because its rated around 3 amps and those motors were definitely pulling over 3. I wanna see you get a bigger switch and see 48v
Brilliant ! Great fun, sounds like the plastic drive gears are getting a bit tired. Those little 12 Volts motors are holding up well with 24 Volts, I bet those motors were very hot.
Hi Rinoa: In the movie Christmas Story they said you'll shoot your eye out kid. The thought about a broken neck comes to mind. Take care. Thanks Brian 78
insanitybiker I do projects with old wheelchair motors on my channel. With 48v and a wheelchair motor that thing could do 30+ MPH. May have to make one
no problem! we finally had a day that wasnt hot, and it looks like we wont for several more weeks, so i made as many videos as i could. ended up making 5 today. :D
The jumper box (pocket pack) that AutoZone carries advertising jumps up to 6.0s just boosting the 12v from my truck set in warranty bypass mode. I swear it pumps in all the amps those motors want at 12 will push other 12 vs around
My son asked if you sped up to vid when he walked in. I was like, girls can make things more fun. They he wanted one. I said you made a limited edition. While I’m here, I finally got to finish the letter and gift. They are in a bubble mailer. I work grave so when I remembered I was sleepy at home. But they are packed and stamped. When I get home tomorrow (my time) I will put it in my mailbox. They normally come around about 2p.
You could make it brushless, on hobbyking.com is a 45dollar 6364 motor and a cheap 6s 180amp esc for 30dollar I think. Throw in a servo tester and your setup is done. If you want insane speed and power you can go to the 48v if you get a different esc(70-120dollar from China) on 48v it will go 40mph
If you need help on what parts and what gearing and stuff just ask, I've done it multiple times and I have a 400amp setup on 18s that powers a small car about the size of your city car😅
Honeyroasted cashewnuts I have a 40v lithium hooked up to my sons John Deer peg perego tractor. I also have a 20v battery. There’s a fuse on the negative input. Will I be ok with 40v taking breaks, etc or should I stick with 20v?
Yup you stripped the gears out. I did something similar (lead acid) years ago I chain sawed the middle stretch it then ran just 12v but I only had one drive motor. I had plenty of spares which is burn one by one!
Dimmer switches use a triac and will only work with AC power. The speed controller from a cordless drill might work with an upgraded mosfet and heatsink though.
cheap controllers for brushed electric scooters can be had from ebay amazon etc for a few pounds. they're built for the purpose, a drill speed controller will rapidly burn out, as they aren't rated for a 100% duty cycle.
those silver things you cut out are probably thermal cut-outs in order to protect the motors from getting overheated from little kids trying to go uphill in the grass and not moving. them little 12v motors are super easy to burn up :( and so are those expensive 250w motors off those little razor things :(
THAT IS AMAZING. Lord do I ever wish you lived near here so we could do crap like that. Have you considered wrapping the wheels with bike tire for extra traction?
Rinoa Super-Genius I just scrolled through and found it. There are some guys that had the people from UA-cam come and film their hopped up Power Wheels, I saw one of them show how they put the bike tire on their wheels. That may be helpful?
Wow that thing is bloody amazing! and fun for all your friends too :-D , Wonder what's next to improve upon this thing unless the motors are cooked?. Photonicinduction did a similar thing with a mobility scooter you really should see the results.
yeah theres quite a few houses in taylor springs and illinois for sale. could probably get one for 18k$. if anyone buys a house around here and is a viewer, i could help restore it at least a little bit
If you would have used the big switch from your tractor it would have worked. I think the switch were using was too small and couldn't handle the amperage.
You should do a Kickstarter to make these for adults. Recycle old toys. These could be for fun or maybe beefed up into enexpensive scooters for the disabled. All I know is, I want one.
Legend says if you bypass the safety features of a power wheels vehicle fisher price himself will open up a portal to hell for you to fall in before your very eyes
The switch only blew up because its rated around 3 amps and those motors were definitely pulling over 3. I wanna see you get a bigger switch and see 48v
That looks awesome! I hope you do more with it like maybe upgrade the motors in it or something!
"We dont want this to be safe we want it to be fun"lol....love it.
Had one of these when I was a kid! Wish I’d have thought to do this back then haha
Brilliant ! Great fun, sounds like the plastic drive gears are getting a bit tired. Those little 12 Volts motors are holding up well with 24 Volts, I bet those motors were very hot.
The resistor helps With the braking instead of stoping. It rolls to a stop with the resistor being on
You can tell testing is going well when the first immediate reaction is to exclaim, "Holy Crap!" The helmet is a nice touch. "Safety Third!"
Hi Rinoa, I've watched you for a couple years now and it was nice to see you happy, smiling and laughing. Keep up the great vids!!!
Hi Rinoa: In the movie Christmas Story they said you'll shoot your eye out kid. The thought about a broken neck comes to mind. Take care. Thanks Brian 78
You are literally the most amazing human being
REALLY GOOD VIDEO. NICE TO SEE YOU PUTTING OUT THE RANDOM TINKERING VIDEOS THAT FIRST DREW ME TO THE CHANNEL.
i'm glad you enjoyed it. ^^
looks like a bunch of fun. Could be fun to do a drive train upgrade of some kind. Makes me think of the power wheels racing at maker fair.
those small wheelchair motor and gearbox units from zero axis wheelchairs..
insanitybiker I do projects with old wheelchair motors on my channel. With 48v and a wheelchair motor that thing could do 30+ MPH. May have to make one
could you put a pully on the end f the axles and use a belt drive motor like on your tarctor ?
Awesome video! Thanks!
Hey rinoa how you been i look foreward to the summer fun at hand btw looking good.
thanks, ive been doing pretty well. this summer is mostly un-fun due to hot weather though.
Such a fun video thanks for sharing Rinoa
no problem! we finally had a day that wasnt hot, and it looks like we wont for several more weeks, so i made as many videos as i could. ended up making 5 today. :D
Now is time for another episode of Wacky Races.
I like your style.
The jumper box (pocket pack) that AutoZone carries advertising jumps up to 6.0s just boosting the 12v from my truck set in warranty bypass mode. I swear it pumps in all the amps those motors want at 12 will push other 12 vs around
thats quick..go for a 72v or 100v..and see what she can do and do u still have the old one?
also do u know how fast u was going?
My son asked if you sped up to vid when he walked in. I was like, girls can make things more fun. They he wanted one. I said you made a limited edition. While I’m here, I finally got to finish the letter and gift. They are in a bubble mailer. I work grave so when I remembered I was sleepy at home. But they are packed and stamped. When I get home tomorrow (my time) I will put it in my mailbox. They normally come around about 2p.
You could make it brushless, on hobbyking.com is a 45dollar 6364 motor and a cheap 6s 180amp esc for 30dollar I think. Throw in a servo tester and your setup is done. If you want insane speed and power you can go to the 48v if you get a different esc(70-120dollar from China) on 48v it will go 40mph
If you need help on what parts and what gearing and stuff just ask, I've done it multiple times and I have a 400amp setup on 18s that powers a small car about the size of your city car😅
Honeyroasted cashewnuts I have a 40v lithium hooked up to my sons John Deer peg perego tractor. I also have a 20v battery. There’s a fuse on the negative input. Will I be ok with 40v taking breaks, etc or should I stick with 20v?
5:49 Super happy face !
for a 36v did you use a 24v and a 12v or (x3) 12v
awesome, you finally finished your electric car ! =p
ahahahahahahahah
use a push-button switch and do pwm manually by hand
Yup you stripped the gears out. I did something similar (lead acid) years ago I chain sawed the middle stretch it then ran just 12v but I only had one drive motor. I had plenty of spares which is burn one by one!
i love this channel
thanks (✿╹◡╹)ﾉ
science for the sake of random
Have you thought about using something like a dimmer switch to control speed? Though, I don't know how well they'd handle the current.
Dimmer switches use a triac and will only work with AC power.
The speed controller from a cordless drill might work with an upgraded mosfet and heatsink though.
cheap controllers for brushed electric scooters can be had from ebay amazon etc for a few pounds. they're built for the purpose, a drill speed controller will rapidly burn out, as they aren't rated for a 100% duty cycle.
Looks like a blast.
it definitely was, while it lasted. might get more and let my drunk neighbors race them around. hehehe
I think I need to build a drift power wheels car. All of the volts!
Rinoa I'm jealous of you.
I weigh about the same as you do, but my PW motors melt real quick at just 36V. This is your second video at 48V...
you weigh 130lb?
@@RinoaL 120, give or take.
"we don't want it to be safe.... we want it to be fun!"
*gets injured having fun*
ITS FINEEEEEE!
Gears went crunch
those silver things you cut out are probably thermal cut-outs in order to protect the motors from getting overheated from little kids trying to go uphill in the grass and not moving.
them little 12v motors are super easy to burn up :( and so are those expensive 250w motors off those little razor things :(
F Yes!!! Best fun to cost ratio ever...
Damage road ,its USA?
Get a couple of old bike tires, cut them to fit the plastic tire then glue them on. Will go like snot.
Reminds me of the time when Photonicinduction "upgraded" a scooter.
you were enjoying that way too much hehe - would love for you to get a switch that can handle the 48v, for science!
Is this stock?
THAT IS AMAZING. Lord do I ever wish you lived near here so we could do crap like that. Have you considered wrapping the wheels with bike tire for extra traction?
thanks! and yup, in fact i replied about bike tires to another comment.
Rinoa Super-Genius I just scrolled through and found it. There are some guys that had the people from UA-cam come and film their hopped up Power Wheels, I saw one of them show how they put the bike tire on their wheels. That may be helpful?
That was awesome! It might work better with a light dimmer though.
Will you come back to this?
this is me coming back, this is a sequel to one i did in like 2014.
yeah maybe next year, i need to focus on bigger projects though tbh.
Next, rig up a button for 48v super boost.
Hahaha omg I did this to mine when I used to have one but at 24v with one of my dads old lorry batteries before he was an electrician.
A PWM rated at 24 volt from a drill trigger switch will do the trick
Did that on my kids' cars, works great. For an adult passenger might want to add more mosfets in parallel and put them on a bigger heatsink
Wow that thing is bloody amazing! and fun for all your friends too :-D , Wonder what's next to improve upon this thing unless the motors are cooked?. Photonicinduction did a similar thing with a mobility scooter you really should see the results.
Safety feature is an auto reset breaker
😂 Love it!
I better preface this comment by saying I don't suggest it, but I'd love to see a 50 lbs kid on that I bet it'd really fly.
10k resistor may have been for braking
actually i think i read it wrong and its a 1ohm resistpr but with some odd letters around it as the part number
Yep, that sounds plausible.
That might void the manufacturers warranty lol, I oughta look for one and chuck a mower engine and gearbox on one of these.
If only my neighbors were interesting. Seriously though, I wish my neighbors did stuff like this
well you could move to taylor springs.
C.O.L.A Me, too.
any houses for sale near-by in fixer-upper condition for cheap? i'm looking to buy a house :)
or you could move to hermitage. i've got projects like this too, though i work all the time so the frequency is not very high :/
yeah theres quite a few houses in taylor springs and illinois for sale. could probably get one for 18k$. if anyone buys a house around here and is a viewer, i could help restore it at least a little bit
should've used an ebike controller and throttle.
Now put a brushless outrunner
This is the stupidest thing I have ever seen. I love it
Tesla EV are making bikes that can do 240 miles per hour and have been ridden in the IOM TT.
Indiana looks so much more fun than California.
If you would have used the big switch from your tractor it would have worked. I think the switch were using was too small and couldn't handle the amperage.
i agree to an extent, i started removing the big switch from my tractor but realized it was rotting and just a bad solution.
You should do a Kickstarter to make these for adults. Recycle old toys. These could be for fun or maybe beefed up into enexpensive scooters for the disabled. All I know is, I want one.
please make your channel picture you on the power wheel with that helmet on its cute and funny, here's an idea power wheel drag races.
lolll ifound one like this in the trash you inspire me :)
haha Fun Stuff!
Wacky Races v2 lol
i wish could not grow up in the same way as rinoa, instead of the standard useless kind of not growing up
well the trick is to grow up as soon as possible, but not to become boring and uninterested in adventure
Cut the back of the seat off
I know what im doing with some left over cellls :)
4x4 96 volts lol
The gas oil companies will be quaking in their boots ha
Legend says if you bypass the safety features of a power wheels vehicle fisher price himself will open up a portal to hell for you to fall in before your very eyes
Can you imagine what it would do if you hooked a car battery to it.
itd be a lot slower. car batteries dont hold much power compared to lithium ion
puglife!
'MURICA!
Now you need to give it to an unsuspecting child
*FIRST*