PapaTrons New Street Car! Goodbye Jack Black?
Вставка
- Опубліковано 25 лют 2024
- Merch Available!
teespring.com/stores/snidertr...
Get Yo'self Some Discounts!
10% off at Snake Eater Performance!
www.snakeeaterperformance.com...
5% off at Shitbox Supply!
shitboxsupply.com/discount/SN...
If you would like to send anything, feel free to send it to the PO Box
PO Box 218
Nashville, MI 49073
Instagram @snidertron3000 - Авто та транспорт
15:24 Ha ha ha his response was priceless
Fun fact the 300 and the ford small block share the same bell housing pattern. Do with that info as you may .
Call the mustang baja blast. Also Id guess it’s going to be a crank sensor or wiring problem. Take a look at the diagnostic lights on the terminator, I believe they change color if they are getting a reading from the crank sensor. Good luck I know you guys will figure it out.
I have a 95 GT myself but it’s a 5 speed. Previous owners molested the car and I’ve been trying to get it back into decent shape since I bought it. They put a head gasket on backwards and I ended up blowing the gasket from over heating it. Finally got the engine back in after the rebuild and I’m just about fire it up. They tore out the ac and power steering claiming they were gonna make it a drag car and changed the cam but decided to use the stock heads and 150,000 mile engine😂
Got a 89 fox and a 90gt fox love my little 302 push rod motors they just sound so good
Not the new car I was expecting…but excited to see what you do with it!
Drag n drive . All the way.
Get after it fellas
I have a 2008 Colorado that’s completely stripped. Nice shape. Needs a drivers door and hood and fenders. I have a 6.0 and a th400 and everything for that turbo kit for it. Remember I sent you all the pics
I dunno why you're surprised about Jack not starting, he's always a stubborn bastard, lol
That’s a pretty nice car, should be pretty cheap,to get up and running, and you can get big brakes and suspension for them
17:20, Your Dad likes race cars or trucks, with sun roofs.
Be cool to build a LS RWD Minivan, with a full cage that can run 8’s, even keep it as a Sleeper.
Call it papa smurf
Fun fact with the holley system if you ground out the system or touch the negative and positive terminals together it wipes your tune. So try writing a tune in and I bet it fires up
4000# w/ 730 wheel should run +- 10.27 @131 mph
Oooh poppa tron I never woulda thought 💔
Coyote swap the mustang,come on poppa Tron. It’s a freakn beast,this way you can build something else with Jack Black, or leave it as is. Strip Jack Black and install it in the Chevelle. I’m just a viewer,but just think about it. Jack Black is legendary. If you put drag light skinny’s on the front and install leaf springs on the inside of the frame,you have enough room for a 15x15 rim on the back. To me, that alone is a motivator,then pops could really launch the truck,especially if you have caltracs
Enjoying to also out of Nashville Michigan.
I'm also from Flint Michigan area .
Pops says I don't know what the hell I want 😂 I like him..
My dang Walbro 525 lph Hellcat pump died under 1500 miles… bought straight from Walbro too 🤦🏻♂️
I ordered an eBay Walbro 535 lph e85 Hellcat pump to replace it. 🤷♂️
So name for the mustang Papa Smurf! And if the cam or crank sensor does not read correctly it will not tell the cpu too spark for fire
Papa's has a nice car, DO that tubular front and A-Frame, that would be a lot of weight gone..But HELL YEAH NICE CAR.. LOVE TO CHANNEL
Jack Black, is like oh no betrade by a ford!!! Lol 😎
Cam sensor can mess with the Holly's. Logs start up on both cam and crank.
Or put it in I think wasted spark. If it's the cam sensor it will run.
Blue Star Ointment, Tidal wave, bruised (blue car black wheels) Grover...
Cool a 4 wheel drive mustang 😊
Be 1500 to 2800 for that mustang down here in Texas. Jack would sell quick to here. Obs. Atleast the oil coat the saturd from rustin. Blue thunder jack
Lol I watch all the car content videos but the first one was SRC when he first started back when the S10 was still on nitrous.
I put sbc 350 with 700r4 built in my 2000 mustang gt. Talk about crazy fast now.
Mustang are great foundation's for a fast car
That's right down the road from me
I say throw a 6.0 in it with a vortex blower and a little bit of happy juice 🧍🏻
dryer sheets, deter mice
36:52 CRT TV spotted.
Not to bad for a Ford 👍👍
Got that thing and Make a drag car and have fun
I’m from ionia if you think that’s where that el Camino ended up and is still there. I thought that’s what i heard in the video at least
I missed the ball on that one
Well sn95 is a foxbody,just a different shell. The good thing about it is it should have disc brakes and they light. You should leave all the carpet cushions out,it’s heavy stuff. I would wack the front end off for weight reduction. Not so happy with choice but it is what it is lol! Now the prices of the s197 mustang is very low for the V6 model and that’s my choice. Of course ls swap it with 4l80e and a 6.0L. They do make whatever you can think of for the mustang’s. I’d say 2700 lbs with driver,a lot lighter than 4,350lbs of Black Jack,hehehehehe. Let’s GO poppa Tron!!!
6.0 procharger 4l80e 410 gears
That’s cuz I a ford guy but take all that jet black stuff and put in the 69 Chevy and get rid the s-95
take ur losses
Eeeeeewwwww a new edge mustang?!?! Nasty.....jkjk. I guess not everything can be as classy as a gmt400......lol
R
As long as y'all put a ls in it it's going to be awesome
Side note if you get rid of those rims I'd be interested.
You gotta call it Captain Inferno..
Siiick!!
Also, im selling my 06 Envoy Denali w alu 5.3 if you wish to add to collection! From AZ
I’ve got a mustang tube k-member if a’guy was interested in having it, it doesn’t have any mounts since it was on a car with a engine plate but I don’t need it anymore if a’guy wanted to come get it or cover the shipping, I mean that’s really the only issue since I live in Missouri, on another beat I’m going to NC for Sir John “Doc”Daughtry training day this week
Yeah, that'd be rad. Whenever you get a chance, you want to email me or DM me on Instagram so I can get more info on it?
Check out boosted lifestyles sn95 build it's gone through a few transformations.
Someone needs to build a better crank sensor.
Out of all the people I know and/or follow, your name is the one that seems to be under every SRC, G2G or Bill H post with a positive reaction. I doubt anyone thinks you're hating on them.
Back when I had the Dime-A-Dozen S10, I made a comment in a video joking about how "smaller channels" like SRC have done good with S10's and there was one dude who was TILTED about it lol some people just don't get sarcastic humor
Never had a autozone , or any parts store crank sensor last an extended period of time
That's what I told him, lets toss a real GM one in it. Idk what one is in it. Whatever came with the motor. But, there's no power in the crank wires. So, I'm gonna try the ecu out of the Skylark just to troubleshoot that the ecu didn't fail cause everything else seems fine
I had to change mine to gm sensors
That mustang made me spit out my beer, just get it going and flip it, put the money in the Chevelle for Pappa Tron it already has a cage. Did you guys try wiggling all the wires/ connections on jack?
The cage in that Chevelle is basically just for show. I wouldn't trust it to save a life at 100+mph. Also, I'd rather give him the Skylark than my Chevelle lol I already gave him Jack
Papa tron should build the chevelle... you should call the Mustang "just another".
Every shop truck needs a turbo
Ford, Chevy, mopar
I’ve got a 92 s10 for sale
Ain't got any gas in it.
Please don't sell. You can never ever have too many A bodies. Don't be that old guy with a story about how you sold a car you can't get back.
Keep up the great work.
Make the f150 in a small tire truck
Bro it takes two seconds to add oil on that door hinge
I'd love to find a 68 chevelle my first car was a 69 I'd pull the big block out of my monte carlo SS a ND put in it
Pops is going to be hopping coke cans before you know it
That Mustang would be cool with a turbocharged 557 Ford bigblock with some Kasse heads on it and a giant solid roller. I'm a Gm guy, but Ford did build some good core engines to start with. The Cleveland is the best smallblock engine ever built. Stock 4V Cleveland heads flow 275+cfm. I've build a few Cleveland engines for customers and those motherfuckers will make some serious power pretty easy. But as we all know, Chevy is the generic, cheap, me too way out. Even the Windsor 351s have much potential. Gary Rowe had a 351 Windsor built by BES back in the 90s in NMCA Real Street class, made 900NA hp and ran low 8s. Had a 28x10.5x15 slick on a 15x8 Weld wheel. Car was a sleeper, looked like a mid 11 second street machine. Single 4-barrel and iron Pro Topline heads with more work than imaginable, about 15-1 compression and a .900+ lift solid roller. Ford Motorsports block. Used a 4150 flange Holley extremely modified. Early 80s Fox Mustang. Still had 4-lug wheels & original 8.8 rear. I was impressed when I seen it at Memphis back in the 90s at a NMCA event. Even a 1000hp turbocharged 2.3 4cyl would be the shit. They do exist. There's a tube chassis ex Pro Stock T-bird that runs mid 7s with a 2.3 Lima Ford. Bigass turbo on it with a shitload of boost. It's pretty hardcore.
Welcome to the new world, where everyone is offended by your opinions… 😂
I think the mustang will be fun, dad needed something lighter, now it’s time to go fast. Gotta ask why does dad always end up with sun roofs?
Man put a bigger ls in jack bro
Clifford needs a 5.0 HO with a E303. super cheap and basic. but just for the sounds.
E cams sounds sooo good but in a stock 5.0 you lose torque with the E cam vs a stock HO cam. The HO truck cam is great for anything heavier and lower revving.
Hey, I'm building a hemi Dodge truck
Looks like a sn95 mustang let's see if I'm right.
Yup I was right 🤣🤣🤣 15:15
Superchargers produce more low-end torque
Put a hemi in it
Jack is mad you had him out in the tent this winter he usually in the garage the Chevelle took his spot and your talking about hughs next to shell
Glad to here Jack isn't going anywhere so that's good but a Mustang lol
Blew by u
Sir don’t hate on the foxbodys
I was being VERY sarcastic, I love foxes. I've owned like 5 of them and as soon as I find a deal on a clean notch I'll have another lol
NUKIN FUTZ
Now that this is turning into a ford channel 😳...😂 jk
@ 13:11 I cringe every time I see someone put a negative battery post on first... smh
tell dad just to buy me out on the blazer and we can make that race truck for both our channels, with bbc and driver ,( me) 2100to 2200 aluiminuin turbo ls 1800 race weight.,,, huh scratching my head... possibility's
Well if you really wanna piss people off you could k swap it
Told your dad where that Chevelle sitting not far from the house 20 minutes away maybe
20 minutes from us? Maybe tomorrow we'll have to go look for it lol
It's on martin road just north of 43 about 3 miles down on left there's a barn not far off the road or 2 miles west of woodland to martin rd take a right you can't miss it but it is a 4 Dr 68 Chevelle
Havent watched yet just see thumbnail, i think its a sn95 or new edge based on sillihoute and front track
Its a pretty recognizable shape lol I thought about making the silhouette more boxy but didn't want to have the comments spammed with "you clickbaiting trash!"
@@SniderTron3000 that wouldve been cool, chopped the back half like a 93- foxbody😂😂 yeah youll have all that nowadays man, fuck the haters🤙🤙 do what you want homie. Love your shorty stepside🤙🙌
Nice ride
Hell yea glad to see papatron happy about it
Promo SM
I have a 93 short bed f150
I am going to lower this year and do an ls swap. I have tried to sell the stuff and everyone wants it for free so I am taking it all and putting together to make a fun truck.
No no you need to move on to l83 !
Hell no…direct injection sux balls
Mustang with a Chevy power plant will be a lot of fun for pops
Coyote = gotta pay2play!! 😎
I knew it was a sn95 from the thumbnail but I’m a sn95 guy that blacked out image was easy for me
👎on the but stain.
SRC Sucks. Damn flat landers
Please don’t get rid of jack just saying