Replacing pndb on freightliner cascadia

Replacing pndb on freightliner cascadia
cost $430.00

[@emmanuellopez9912]

I was having the Same problem and I stopped turning the kill switch off and haven’t had that problem any more

[@hamzaleyl3939]

i was having same problems but i change the first fuse. 5. and i haven’t seen it again

[@coreyhaynes7122]

I have the same problem I’ve changed it and it’s still doing same thing any advice what about the switch itself

[@brauliogoris516]

I do have that problem but my kill switch is blinking was it on yours and does it come with a new one

[@dejavu4063]

Hey Vic did you check the fuses? I'm asking because i watched another video where the guy check his & the top one was blown.

[@jitskid831]

Was it giving you a check engine light ?

[@KN-mi7mh]

I guess it depends on the area I got it for 370$ from the dealer,and I havent had the problem since then

[@benjamingonzales4327]

Power network distribution box

[@brauliogoris2964]

My 2011 Cascadia when idling at truck stop, or at a light feels like it want to turn off but it doesn’t.. almost like a slip or an aggressive hiccup. Could this be the same issue?

[@bally1664]

That sounds more like a mechanical problem.

[@DIYSEMI]

Good tip...12 volt shocks hurt

[@mac8122]

Thnk u my brother

[@truckinnuttz7038]

my guy always coming thru with the good info. i have a question. my cab clearance lights arent cutting off thanks to the NYC potholes. I'm trying to locate the cab clearance lights relay if that exists. I'm trying to avoid purchasing the entire SAM CAB. any insight? and thanks for all the videos

[@indersivian1598]

I got same probable in my Truck
I will change soon this part 👍

[@cgarciamacias68]

What’s up vic . My 2015 cascadia dd13 has been having a problem where my truck looses power only when it hits bumps on the highways so I changed the pdnb it’s power distribution network box . And the problem is still there. I have took it to mechanic they checked all connections batteries cables still can’t find anything. Any suggestions should I change the engine harness any help or experience theses issues

[@aaronbyrne139]

Did you figure it out. My truck is doing the same thing.

[@benchtrucking3455]

Good info!

[@indersivian1598]

Where i can find pndb in truck?

[@yaroslav1577]

Engine compartment, left side.

[@woodsbikes6130]

Good video Vic. Dang parts are so expensive. Uggh. 😁 It's good that you do as much of your own maintenance as you can.
Keep it up.
Stay safe and Cool Runnings everyone 😎.

[@MSingh-nv3sx]

Thanks

[@josezayas6069]

Were is this part located ??? Thanks for all

[@cabronyvago407]

Driver side firewall center under airlines cables u will see it look for it

[@josezayas6069]

Thanks Mr. Vic this is Jose even though I don’t own a freight liner I own Mack’s but a few of my partner do own this particular model this is why asked but have a blessed day thanks for all .

[@shobankumar9769]

I changed it myself yday.... Mech asked men$300 to do this simple job

[@nicholaslandolina]

Main fuse

[@makincash3337]

Which one is the main fuse?

[@rich4780]

Hey Vic , I recent changed my coolant resorvoir and I accidentally got some dirt/ mud in it... will it damage my engine? Should I flush out the coolant ?

[@rich4780]

Thanks for nothing

[@rivera75nesto]

Doesn’t your system have a filter ?

[@ChristianTrucker]

Dont cook them fingers lol

[@elchihuas4379]

It is only the long fuse that go bad on the main PNDB I'm 1000+% sure 👍

[@elchihuas4379]

Dealer said is the box so they can sell it to you for no rason for $430 .... I have 7 trucks all 2012 freightliner and I only change the bad long fuse ($25) everytime my truck shut down while driving.

[@franciscolira3389]

@@elchihuas4379 cual fusible? Tengo este problema

[@elchihuas4379]

@@franciscolira3389 dentro de la caja hay fusibles largos son 2

[@franciscolira3389]

@@elchihuas4379 son 3?

[@elchihuas4379]

@@franciscolira3389 las orillas de esos fusibles parecen como los postes para las baterias . Testealos . Si uno de ellos esta quemado puentea lo

[@aceking4644]

Just bypass it