incell is great but for iphone 11 is max for use, newer models like 11pro/12/13/14 have got OLED screens so we need OLED screens with changeble IC field (balls made on field for faster chip switch) not IPS versions
Aftermarket screens have its own IC to store True Tone data and this IC does not read True Tone data from the original touch IC. That's why you need to program True Tone before transplating the touch IC.
does this method till work on an iPhone 14 (Plus) with IOS 17? I just made such a repair and I get the unknown part, but true tone is available. the light dimming also doesn't work after display replacement
I have iphone 13 yesterday i replaced display on that before giving mobile to shopkeeper i said them i want both true tone n unkown part error they said yes !! But after repairing mobile they have given me my ic back saying we tried your ic with 2-3 display folder but it couldn’t read n error is still there can you help mee Dose ic gets corroupted or what?? 😢😢
Are there aftermarket screens that does not support programming? I bought new 12 pro display to replace the cracked one and i only want truetone back, i dont care about the genuine message, but when i start to program it then writing/burning fails every time.
The aftermarket screen shown in the video is pre-tinned and can be soldered directly. However, REWA technology recommends removing the tin first, and then re-planting the tin with mid-temperature tin to improve the success rate of soldering.
I have questions regarding screen replacement on iphone 14 and 14 plus. As we know, before we fixed anything we disconnect the battery on any iphone’s model. is it safe to do screen replacement without disconnecting the battery on 14/14 plus model? As we know we have to disassemble the back glass to reach the battery. Because i’ve fixed iphone 7 without disconnecting the battery like 5 years ago and it went completely dead. So i’m a bit scared. Please answer🙏🏻
I got this message on my phone without ever replacing anything or opening it. The phone was directly from the apple store. Starting after a year. iPhone 12 Pro Max.
@@rewatechnology2008 it was at apple. I did, but at the time I couldn’t turn the phone in, needed to do a more recent backup. I was just more pointing out that this happens without changing parts.
That looks great! One question: would it be possible to connect the cleaned IC directly to the tin on the tag on flex without reballing it (only tin removal and cleaning) or is that discouraged because fresh works better or what might be the reason?
For a small 3x3 ball chip this sometimes works. But this ic is just too big, you dont want that margin of error (if the balls are different size then there is a risk the ic wont sit properly). The stencils are really cheap, so make sure you buy them in bulk and never ever try to skip this step. Worst case scenario the balls may bridge and cause a short, possibly damaging the motherboard. You really dont want this to happen on a 1tb 15 pro max while the client is waiting nearby haha
Very clean and scientic work,butt tell me something,if we don't change the chip, beyond the message, will we have any other screen functionality problems???
@@rewatechnology2008 my battery actually become much weaker. go to sleep with 50% power and wake up without doing anything in between and the next day it has only 25% left.
I am desperate, can someone tells me if there are still any other ways to fix it, when I no longer have the chip from the original display. I really want to get rid of the message because it makes my battery last much shorter.
Screw apple antirepair tactics, go REWA! 😊
Good video. This is actually not so difficult to do. My problem is, where do I get the tag on flex?!
Hello, the REPART screen we sell comes with flex! pls check shop.rewa.tech/detail/repart-iphone-14-incell-screen-replacement.html?
Unknown Part After Screen Replacement on iPhone is not a problem after watching this video 😍😘
can i just take the ic from my old screen and put it in my new screen?
Jewelry work!
incell is great but for iphone 11 is max for use, newer models like 11pro/12/13/14 have got OLED screens so we need OLED screens with changeble IC field (balls made on field for faster chip switch) not IPS versions
We have an OLED screens with changeable IC field.
if you are transferring the IC why do you need to program truetone???? it’s already in the IC
Aftermarket screens have its own IC to store True Tone data and this IC does not read True Tone data from the original touch IC. That's why you need to program True Tone before transplating the touch IC.
@@rewatechnology2008 Ahh i get it, that’s why there’s so little traces on the transplant flex it’s just enough to get rid of the messages
Thanks sir ❤❤
Smooth operator .... Lovely ...
Nice information thx 🎉
*good video*
Hi Sir, How do I move the LCD IC to the original LCD from the iPhone Lock iCloud
check my shop on google or google maps
protech mobile
Hi @REWA Technology , can you tell where I can find the flex tag .thks
Question
I still have Unknown parts on my iphone however if i try to update iOS 17.4 would there be an effect? (iphone 13Promax)
NAIS JOB SAR 👌👌👌👌
does this method till work on an iPhone 14 (Plus) with IOS 17? I just made such a repair and I get the unknown part, but true tone is available. the light dimming also doesn't work after display replacement
Thank you for watching❤
Love U bro❤
thi is will work on oem used screen mean the orjinal used one is it programable?
where can I buy these flex cables?
May I know what kind of phone model you need to match the flex cable to? We can buy them from REWA shop, shop.rewa.tech/
do you have a supplier in india for purchasing the screen only
Great job
why the i.c doenst go direct on the screen like the older phones?
Why does this display look like an LCD (shadows and thicker bezels) to me?
can same be done for iphone 11 and xr? i hate doing transfer on there due to risk to damage new screen! this method reduces risk to screen damage
Hi, there is no need to transfer original IC for iPhone XR. And for the iPhone 11, pls check our early video ua-cam.com/video/jT6eHy7lr1A/v-deo.html.
You dont show where to buy the tag on flex
face id working?
I have iphone 13 yesterday i replaced display on that before giving mobile to shopkeeper i said them i want both true tone n unkown part error they said yes !!
But after repairing mobile they have given me my ic back saying we tried your ic with 2-3 display folder but it couldn’t read n error is still there can you help mee
Dose ic gets corroupted or what?? 😢😢
Hey hi sir how to find tag in flax
Sir I have a Question ..?
The tag on flex is compulsory. If u don’t have tag on flex then how to remove important message
Hi, sir, Not all models require flex to remove “Unknown Part” message, but the iPhone 14 requires it.
all after market Display not available pinout for tag on flex past ??
Not all aftermarket screens for iPhones require a flex cable to remove the message, but the iPhone 14 does!
Are there aftermarket screens that does not support programming? I bought new 12 pro display to replace the cracked one and i only want truetone back, i dont care about the genuine message, but when i start to program it then writing/burning fails every time.
it will affect the battery performance if you don't have the true genuine message
First like and comment❤
But face id not working after change Market screen
do you offer calibration tools for m series macbook screen replacement too?
No, we dont provide tools for MB calibration
Since when Apple started to put underfill under this IC ? I could re-ball it directly in iPhone 12
The aftermarket screen shown in the video is pre-tinned and can be soldered directly. However, REWA technology recommends removing the tin first, and then re-planting the tin with mid-temperature tin to improve the success rate of soldering.
Hi sir After change Og ic from old lcd to new lcd true tone restore possible ?
Hi, for aftermakert screen, true tone need to be restored by programmer.
I have questions regarding screen replacement on iphone 14 and 14 plus. As we know, before we fixed anything we disconnect the battery on any iphone’s model. is it safe to do screen replacement without disconnecting the battery on 14/14 plus model? As we know we have to disassemble the back glass to reach the battery. Because i’ve fixed iphone 7 without disconnecting the battery like 5 years ago and it went completely dead. So i’m a bit scared. Please answer🙏🏻
No
Yes
I got this message on my phone without ever replacing anything or opening it. The phone was directly from the apple store. Starting after a year. iPhone 12 Pro Max.
probably IC pads disconnected from a fall of the phone or water damage
@@ronlevin2339 it’s the camera. Says it’s camera is an unknown part. Guess that makes sense.
@@yoitsgiook maybe only connector got loose. Opening phone is needed of course
Hi, it is recommended that you seek after-sales service at the store where you purchased the phone.
@@rewatechnology2008 it was at apple. I did, but at the time I couldn’t turn the phone in, needed to do a more recent backup. I was just more pointing out that this happens without changing parts.
Think I’ll just stick to my day job as a brain surgeon.
Great video, but know most people are not going to go through all of these steps.
That looks great! One question: would it be possible to connect the cleaned IC directly to the tin on the tag on flex without reballing it (only tin removal and cleaning) or is that discouraged because fresh works better or what might be the reason?
After removing the tin, adding mid-temperature solder will increase the chances of success.
For a small 3x3 ball chip this sometimes works. But this ic is just too big, you dont want that margin of error (if the balls are different size then there is a risk the ic wont sit properly). The stencils are really cheap, so make sure you buy them in bulk and never ever try to skip this step. Worst case scenario the balls may bridge and cause a short, possibly damaging the motherboard. You really dont want this to happen on a 1tb 15 pro max while the client is waiting nearby haha
We need that lines name
I like it 👍
I bet the apple execs are cursing rewa right now😅
were loc
Market have 13 Pro lcd ?
It's coming out soon. We're looking at late November, early December.
❤❤
I think I'm going to be a scammer when I trade secondhand
Only if you say its brandnew 😂
Very clean and scientic work,butt tell me something,if we don't change the chip, beyond the message, will we have any other screen functionality problems???
You wont
Hi, It's just the message problem, it doesn't affect the use.
@@rewatechnology2008doesn't it ruins the auto brightness and true tone functionality?
@@rewatechnology2008 my battery actually become much weaker. go to sleep with 50% power and wake up without doing anything in between and the next day it has only 25% left.
Plaster name tell me
👉shop.rewa.tech/detail/mid-temperature-solder-paste-wl-oem-new.html?YTB1114&Solder%20Paste
iPhone 13 Pro Possible?
Hi, not yet available.
Please reply to emails and comments. Thank you
what if i dont have the original screen?
Same for the X series ?
The X series don't have "Unknown part" message problem.
Thank you for a reply on this.
@@rewatechnology2008
太菜了这个水平，实际上我们都是直接把ic移过去，不用外挂排线，写个原彩就好了，而且做完很漂亮。
請問沒有原本螢幕的ic是不是就沒救了
@@user-cb2wg1dm4y 售后可以付费换屏，价格和市场的拆机屏差不多其实。
I am desperate, can someone tells me if there are still any other ways to fix it, when I no longer have the chip from the original display. I really want to get rid of the message because it makes my battery last much shorter.
this is simply incorrect information