Це відео не доступне.
Перепрошуємо.
How to Transfer IC to the new iPhone 15 Pro & Pro Max Screens? | Mobilesentrix Tips and Tricks #72
Вставка
- Опубліковано 19 сер 2024
- 🔧 Welcome to MobileSentrix's Repair Tips and Tricks! #72,
Remember to 👍like, 🔔 subscribe, and hit the notification bell for more helpful repair tips from MobileSentrix! 🛠️
iPhone 15 Pro Max Parts (USA) = www.mobilesent...
iPhone 15 Pro Parts (USA) = www.mobilesent...
iPhone 15 Pro Max Parts (Canada) = www.mobilesent...
iPhone 15 Pro Parts (Canada) = www.mobilesent...
🔗 Stay connected with MobileSentrix:
Website: www.mobilesentrix.com
UA-cam: / mobilesentrixofficial
Twitter: / mobile_sentrix
Facebook: / mobilesentrix
Instagram: / mobilesentrix
LinkedIn: / mobilesentrix
I want to know how they will handle RMAs. Are they going to reject them for being reworked?
Thank you MobileSentrix and Derrick! You guys are awesome!
Great work on supplying the parts and knowledge, however….
These screens need to be so much cheaper. $255 for the screen, Apple charge $329 for the repair. Even if you match apples price with the work involved needing trained micro soldering staff, for $74 profit? and if you break the IC then you’re stuck. You are also fitting a lower quality part for the same price at best, while taking the risk for $75 profit. At what point is it not just worth going authorised or ordering parts via self service. If the screens are $100 then fine, but at $255 there’s no room to make any decent profit fitting them 🤷🏻♂️
Price will adjust when there's more supply, I believe.
Prices always change with time so it will be more and more profitable with time. The main thing is being able to do the repair with the IC and having half the work done for you it much easier. Adding 5 minutes to the repair, sure not the first few times, really just makes sense for the benefits.
@@MobileSentrix we still dont have soft oled for 13 pro max you talk about over time will drop. YES will drop who knows after iphone 18 come out or iphone discontinued after glasses will new future :D
correct, they need to be released faster and more price effective, because by the time the iphone 16 comes out, most with the 13 will "trade in" leaving us a repair shop in a difficult spot having to play catch up. @@mmfix3851
And the question is how much to charge for that is it worth or no ? I believe is not because if you have soldering skills why will spend time to fix LCD that is cost $250+. customer will not appreciate that. How much to charge for soldering ? 100? -200? customer will still need to pay $400 plus their is a risk for the new LCD that probably MS wont accept warranty after soldering. again question is it worth ? the screen is not $50-100 to play with it, and customer wont pay $400 for screen when apple charge same price $379! NoT WORTH ! good skills soldering job better data recovery not screen replacement !
I agree with the risk factor. It's hard to make it make sense if the warranty is voided once the IC work is done. What if the IC work is done right, but the screen is defective? Is the repair shop that takes the fall because we had to swap the IC before installation? It's a tricky situation.
Thank you boss
is there a link to the heat resistant sheet?
Search “heat resistance pad”, made by Wylie
damages screen and doesn't show it working after transfer lmao
so if I just plug in the screen without transferring the ic will the screen work but give the notification or will the screen just not work at all
Needs the IC
It will work and turn on but no touch without the ic chip needed for the touch to work.
they'll probably release 2 versions, one with and one without.
The Display will come on, but there will be no touch without the IC Transfered.
this isnt worth the risk,screen replacement cost is 650 euro here from apple🧐,yesterday ive replaced such a screen which was pulled off from another iphone and the screen itself costs 400 euro just to have it,did i need to transfer this ic?nah im not crazy and still true tone and auto brigness will not work anyway