Audi A4 2.0 TDI - How To Do An Oil And Filter Change - No Dipstick Type

Поділитися
Вставка
  • Опубліковано 15 вер 2022
  • "How to" oil and filter change on an Audi A4 TDI. This simple job threw in a couple curveballs with the sump plug and the lack of dipstick but we got there in the end.
    Just to clarify a few details I shall list quantity and torque specs -
    Oil capacity with filter - 5 Litres
    Sump plug torque - 30NM
    Oil filter housing torque - 25.5NM
    Andy
    Andy
  • Авто та транспорт

КОМЕНТАРІ • 13

  • @Nelson373737
    @Nelson373737 2 місяці тому +1

    Great job 👍👍👍👍

  • @stuartmcrae1647
    @stuartmcrae1647 5 місяців тому +1

    Excellent explanatory video

  • @wilfamos7314
    @wilfamos7314 Рік тому +1

    Excellent video as ever, thanks for posting. 🙂
    No undertray and a knackered sump plug? Main dealer at their very best then! Owner was lucky that new plug solved it though....phew.
    What a load of nonsense w/o a dipstick. VAG saved what £3 per car? Bean counters before engineers again.

    • @AMSVauxhall
      @AMSVauxhall  Рік тому +1

      It’s back in next week for a CV joint so I will check and see if it is leaking but I’m sure the new plug will cure it 🤞🏻

    • @wilfamos7314
      @wilfamos7314 Рік тому +1

      @@AMSVauxhall CV joint replacement? Got to be a video there. Thanks Andy 🙂

    • @AMSVauxhall
      @AMSVauxhall  Рік тому

      @@wilfamos7314 would love to do a video on every job but time is always against me 😏

  • @user-pg3eu4jy3n
    @user-pg3eu4jy3n 3 місяці тому

    Could you list the tools needed for a novice please

  • @split_pin
    @split_pin Рік тому +2

    Andy what's involved in fitting a helicoil? My worst nightmare in an oil change is a stripped thread on the sump plug.

    • @AMSVauxhall
      @AMSVauxhall  Рік тому +2

      There is a few scenarios but it’s really the last thing you want. Probably would be better to cut new threads. I will try do a video on a helicoil. Rarely use them nowadays to be fair but I used them often on VX cylinder heads when the manifold bolts used to strip out nearly every time 😏

    • @split_pin
      @split_pin Рік тому +1

      @@AMSVauxhall Thanks man. A garage nackered the threads on a sump plug on my old Corsa and fitted a helicoil I never touched it though as I used a Pela for oil changes. Right after I fitted a new engine too, I can't remember why they were even interfering with the oil. I always felt the helicoil was a bit dodgy.

    • @AMSVauxhall
      @AMSVauxhall  Рік тому +1

      @@split_pin they are dodgy. I’ve seen the used on brake carrier slider threads (mainly VW) but as soon as you unscrew the sliders it pulls the helicoil out 😏

    • @split_pin
      @split_pin Рік тому

      @@AMSVauxhall Crikey. Safe*