Your Stribog is looking good. I tried using a high red dot mount like that with my Stribog when I first got it but I couldn’t get a proper cheek weld with the sb tactical folding brace.
Thanks. I like the more heads up position I get from the taller red dot, especially on cqb guns were super accuracy isn't as important. Thanks for watching.
If it was the straight magazines that was the issue, wouldn't the Glock 33 rnd mags and the 20+rnd Colt stick mags have issues in their respective firearms? Just trying to get to the bottom of the straight vs. curved mag debacle. Now wondering if it was the old orange follower vs. new black follower...? Anywho, I'm looking to upgrade my A3 with HBIs' short stroke buffer, extended bolt stop/release, steel FUS/BUIS, modular safety selector, ambi-charging handle, locking charging block, and more ammo.
Glock mags are angled in relation to the 9mm round. That's why they sit at an angle when used on say an AR9. The Stribog mags sit 90 degrees to the bore. Military Arms Channel has some great videos detailing why the straight mags suck.
@@Kentucky.Tactical yeah, MAC has his opinion, yet there's plenty of others that show the straight mags still work, that's why it's still unresolved to me.
@@Kentucky.Tactical I've placed the glock mag and streebog mag side by side vertically, and the glock does have the rounds significantly nose high, that may negate the need for curved mags for glock, both the feed lip and follower geometry of the glock gigglestick makes the round nose high compared to streebogs follower and feed lip geometry...hmm, glocks have a feed ramp up into the chamber, streebog is more of a shallow funnel straight into the chamber...maybe a better feed ramp...just some thoughts and non expert observations between my CZ-P10C(my glock example) and the streebog...thanks for helping me think this through.
@@stansenter2660 no it’s definitely resolved I’ve got over 1000 rounds through my curved mags in my Stribog if I try to run one mag full in the straight mag they jam and fail to feed….you don’t see how that’s a problem and already been fixed then ure a moron and shouldn’t be using firearms period …. Military arms channel is very knowledgeable on these things and it’s not his opinion it’s “fact”which are backed up by many other you tubers as well
@@Kentucky.Tactical thanks for checking on the info and letting me know. I went in the site and found them. They’re in stock. I’m looking at an A3 with an 8” barrel. Wonder if I swap to the 6.3” if it’ll clear the upper receiver so I can run a can… if it ever gets out of NFA jail. Lol. I like the full size upper receiver due to the amount of pic rail on the bottom. I plan to SBR the Bog I pick up.
I always prefer a stock. I've converted most of my pistols over to SBR's. Once I was in the system from building silencers I figured why not. Thanks for watching, I really appreciate it.
@@iamjulianromero8773 at the time the A3 had just been released in the US and there was problems with premature internal parts wear. Also, this was the only one in stock at the time.
I'm not exactly sure. Sorry. Look up the current price of the Stribog, Lingle lower receiver, In lead we trust barrel, and the HB Industries accessories and you can get a rough estimate.
@@ctrip34 with the new curved Stribog magazines there's really no need for the Lingle lower so you could eliminate that cost unless you're just going for the esthetics. Thank you for watching.
That's true, good lookin out. & yeah no prob. I love checkin out ur set ups & glad I found the channel. Also If you ever have the time you should go over your F1 cans & the design of the internals. Theres no one out there that really does it other than silencer student but he hasn't really been dropping any new shit in a while. Lol I'd do it if I had the money, resources & knowledge but I don't. But anywho look forward to more man.🤙
@@ctrip34 I will do that as soon as I get a chance. I'm actually in the process of building 4 new Form 1 cans. I've got 2 on hand and waiting for the tubes on the other 2. Keep an eye out, hopefully I can put a video together this weekend.
So that box of oem parts keeps growing huh? Im between a steibog and a psa ar-v. The latter has a build kit so i would have leftover parts. This set up is pretty slick
I like both platforms. The AKV is infinitely more customizable though. If you buy anything from PSA please use my below. www.avantlink.com/click.php?tool_type=cl&merchant_id=366d8fa6-2a72-4d59-bc31-583f74cfd91b&website_id=35e91a03-c8b9-4b62-a767-840e2c58ea93&url=https%3A%2F%2Fpalmettostatearmory.com
Bro the way it came from The factory (with the curved mags only) competes with the B&T hands down…. but that is a seriously nice gun now aesthetically…. There’s really nothing you did to upgrade performance really is there ? I mean the buffer pad yeah but like the barrel and all the other gadgets are just aesthetics especially since you get more ballistic advantage out of the 8 inch barrel but I would much rather have the one you have it looks way sexier I was just simply saying that it’s all aesthetics so you’re gun will def hold up to a b&t
I built this before the curved mags came out so it was definitely a performance upgrade at that time. Now that the new curved mags are out I would say the lower swap is unnecessary. Thanks for the kind words and thanks for watching.
Can u not read ? Wow there are some slow peeps in the gun world! This bcm grip is made to put on pistol builds it’s slightly canted which makes it legal it’s basically a slap in the face to the ATF by BCM if you don’t believe me do some research I have them on all of my pistol Builds for years now…
Yo, it’s pronounced “ Streeeeeebog “…. ffs….. and you don’t need that lower, the stock gun with curved mags and a short stroke buffer take care of business nicely….but to each his (or her) own….
Factory lower is polymer has no options for different grips, and being able to put aftermarket AR grip, trigger, and safety selector is miles above what strEEbog provided. Magpul scorpion mags hold 5 more rounds. And the 2nd gen lingle lower does away with the janky bog factory bolt catch and spring.
@@bulltron8926 well that’s one man’s opinion 👍🏻 Not all of us need to change out all the bells and whistles my safety selector works just fine yes it’s not as nice as my ar”s but it’s literally just a safety selector and it’s also Ambi
Feed lips on the curved mags still Crack and break. Got rid of my spa1 because I got frustrated with dealing with it. Now with this and the A3 lower, looking into an Spa3 with a scorpion lower. Game changer.
Your Stribog is looking good. I tried using a high red dot mount like that with my Stribog when I first got it but I couldn’t get a proper cheek weld with the sb tactical folding brace.
Thanks. I like the more heads up position I get from the taller red dot, especially on cqb guns were super accuracy isn't as important. Thanks for watching.
If it was the straight magazines that was the issue, wouldn't the Glock 33 rnd mags and the 20+rnd Colt stick mags have issues in their respective firearms? Just trying to get to the bottom of the straight vs. curved mag debacle. Now wondering if it was the old orange follower vs. new black follower...? Anywho, I'm looking to upgrade my A3 with HBIs' short stroke buffer, extended bolt stop/release, steel FUS/BUIS, modular safety selector, ambi-charging handle, locking charging block, and more ammo.
Glock mags are angled in relation to the 9mm round. That's why they sit at an angle when used on say an AR9. The Stribog mags sit 90 degrees to the bore. Military Arms Channel has some great videos detailing why the straight mags suck.
@@Kentucky.Tactical and the Colt mags?
@@Kentucky.Tactical yeah, MAC has his opinion, yet there's plenty of others that show the straight mags still work, that's why it's still unresolved to me.
@@Kentucky.Tactical I've placed the glock mag and streebog mag side by side vertically, and the glock does have the rounds significantly nose high, that may negate the need for curved mags for glock, both the feed lip and follower geometry of the glock gigglestick makes the round nose high compared to streebogs follower and feed lip geometry...hmm, glocks have a feed ramp up into the chamber, streebog is more of a shallow funnel straight into the chamber...maybe a better feed ramp...just some thoughts and non expert observations between my CZ-P10C(my glock example) and the streebog...thanks for helping me think this through.
@@stansenter2660 no it’s definitely resolved I’ve got over 1000 rounds through my curved mags in my Stribog if I try to run one mag full in the straight mag they jam and fail to feed….you don’t see how that’s a problem and already been fixed then ure a moron and shouldn’t be using firearms period …. Military arms channel is very knowledgeable on these things and it’s not his opinion it’s “fact”which are backed up by many other you tubers as well
Damn that’s a nice setup! Looks like the perfect mix of the scorpion and apc9
Thanks and thanks for watching!
What tri lug mount did you use on your suppressor
It's integrated into the barrel. The barrel is from "I Lead we Trust".
Can a binary triger go in that frame?
I'm not sure.
Clean build.
Thanks for watching.
What kind of tape is that?
Goon tape. They sell black and Fde.
@@Kentucky.Tactical Heeey thank you! I have a similar setup and I wanted to get this on it. It didn't look like run of the mill athletic tape.
Nice setup. What length barrel is that?
I can't remember, around 7 inches. It's the In Lead We Trust tri lug barrel. They don't offer it anymore.
@@Kentucky.Tactical bummer. I’m planning a Stribog soon. Thanks for the reply.
@@8BloodyKnuckles they still sell a 6.3 inch barrel for the Stribog that's only threaded. I think they have it in stock now.
@@Kentucky.Tactical thanks for checking on the info and letting me know. I went in the site and found them. They’re in stock. I’m looking at an A3 with an 8” barrel. Wonder if I swap to the 6.3” if it’ll clear the upper receiver so I can run a can… if it ever gets out of NFA jail. Lol. I like the full size upper receiver due to the amount of pic rail on the bottom. I plan to SBR the Bog I pick up.
Nice pew but for price of the gun and upgrades couldn’t you could get a nice MP5?
You probably could but I've already got an MP5 clone (I have a video).
What made you want to change out the brace ?
I always prefer a stock. I've converted most of my pistols over to SBR's. Once I was in the system from building silencers I figured why not. Thanks for watching, I really appreciate it.
And what was the deciding factor for you picking up a SP9 A1 vs a A3
@@iamjulianromero8773 at the time the A3 had just been released in the US and there was problems with premature internal parts wear. Also, this was the only one in stock at the time.
@@iamjulianromero8773 a3 sucks the roller lock have ben known for unreliable feeding
Nice !!
Thanks
Screw the folding stock option, I’m not paying a gov tax for a so called SBR…..
It sucks for sure.
You could just put the brace on it it literally looks the same and functions in the same sense …. Just not as firm
How is the recoil compared to your mp5 clone?
It's not quite MP5 soft but I think it's a close as you're going to get with this platform. Thanks for watching.
Stock stribog does not like 147 federal hst hollow points
Thanks for the info. That's sometimes a problem with European guns, they don't design them to reliably feed hollow points. Thanks for watching.
What length is the barrel?
It's a 7.4" In lead we trust barrel.
I really want one of these. What's around the grand total?
I'm not exactly sure. Sorry. Look up the current price of the Stribog, Lingle lower receiver, In lead we trust barrel, and the HB Industries accessories and you can get a rough estimate.
@@Kentucky.Tactical yeah it's over 2Gs. I was afraid of that. Dope gun tho.
@@ctrip34 with the new curved Stribog magazines there's really no need for the Lingle lower so you could eliminate that cost unless you're just going for the esthetics. Thank you for watching.
That's true, good lookin out. & yeah no prob. I love checkin out ur set ups & glad I found the channel. Also If you ever have the time you should go over your F1 cans & the design of the internals. Theres no one out there that really does it other than silencer student but he hasn't really been dropping any new shit in a while. Lol I'd do it if I had the money, resources & knowledge but I don't. But anywho look forward to more man.🤙
@@ctrip34 I will do that as soon as I get a chance. I'm actually in the process of building 4 new Form 1 cans. I've got 2 on hand and waiting for the tubes on the other 2. Keep an eye out, hopefully I can put a video together this weekend.
I get it, I do the same thing to my guns. I love upgrading EVERYTHING!!!@ lol
So that box of oem parts keeps growing huh? Im between a steibog and a psa ar-v. The latter has a build kit so i would have leftover parts. This set up is pretty slick
I like both platforms. The AKV is infinitely more customizable though. If you buy anything from PSA please use my below.
www.avantlink.com/click.php?tool_type=cl&merchant_id=366d8fa6-2a72-4d59-bc31-583f74cfd91b&website_id=35e91a03-c8b9-4b62-a767-840e2c58ea93&url=https%3A%2F%2Fpalmettostatearmory.com
Bro the way it came from The factory (with the curved mags only) competes with the B&T hands down…. but that is a seriously nice gun now aesthetically…. There’s really nothing you did to upgrade performance really is there ? I mean the buffer pad yeah but like the barrel and all the other gadgets are just aesthetics especially since you get more ballistic advantage out of the 8 inch barrel but I would much rather have the one you have it looks way sexier I was just simply saying that it’s all aesthetics so you’re gun will def hold up to a b&t
I built this before the curved mags came out so it was definitely a performance upgrade at that time. Now that the new curved mags are out I would say the lower swap is unnecessary. Thanks for the kind words and thanks for watching.
Nice sbr.
@@ericblechinger5566 thanks for watching
Did you register it has an SBR? You have a stock on it, not a brace plus a vertical fore grip. All make a SBR. Dumb ass laws but still.....
Yes, it's a registered SBR.
None ya business fed boy
Can u not read ? Wow there are some slow peeps in the gun world! This bcm grip is made to put on pistol builds it’s slightly canted which makes it legal it’s basically a slap in the face to the ATF by BCM if you don’t believe me do some research I have them on all of my pistol
Builds for years now…
Yo, it’s pronounced “ Streeeeeebog “…. ffs….. and you don’t need that lower, the stock gun with curved mags and a short stroke buffer take care of business nicely….but to each his (or her) own….
I built this before they offered the curved magazines.
Factory lower is polymer has no options for different grips, and being able to put aftermarket AR grip, trigger, and safety selector is miles above what strEEbog provided. Magpul scorpion mags hold 5 more rounds. And the 2nd gen lingle lower does away with the janky bog factory bolt catch and spring.
@@bulltron8926 well that’s one man’s opinion 👍🏻 Not all of us need to change out all the bells and whistles my safety selector works just fine yes it’s not as nice as my ar”s but it’s literally just a safety selector and it’s also Ambi
Feed lips on the curved mags still Crack and break. Got rid of my spa1 because I got frustrated with dealing with it. Now with this and the A3 lower, looking into an Spa3 with a scorpion lower. Game changer.
@@jeremylee3787The Spa3 has a lot of problems, the Spa1 gen 2 is more reliable.