I use CRC valve cleaner on mine every 10k with gumout all in one in the fuel, shit got PEA in it. If you haven't already do a tranny drain and fill same with transfer case fluid, helped the bogging for me, IS looks and sounds dope though brother, least you take care of your shit
For my is350 with 290k miles I just use redline si-1 every 3k miles ( filling up from empty) and 93 from sunoco. I just recently started using 93 from sunoco and it pulls waaayy harder
Pro Tip: its recommended to do an oil change after you run a full tank of gas with the fuel system cleaner. (You should probably run 3 tanks w/ the cleaner at first then run one tank before an oil change)
Try using chevron fuel treatment helps out clean out the catalyst and ur exhaust overall. Rotten egg smell went away and the random pops my exhaust make at cold start are going away
dog if you want a real carbon cleaning you need to pull the heads and put it in a solvent tank. the other method that leaves the heads installed you use bg intake cleaner and hook it to shop air with it revved up to 3k so you have high temps and good airflow. the reason to do it from the throttle body is it distributes evenly.
I use CRC valve cleaner on mine every 10k with gumout all in one in the fuel, shit got PEA in it. If you haven't already do a tranny drain and fill same with transfer case fluid, helped the bogging for me, IS looks and sounds dope though brother, least you take care of your shit
Much thanks 🤝🏾🙏🏾
Awesome loud exhaust, Best performance NGK spark plugs, u won’t regret it 🔥🔥what’s on my 08 IS2 Awd pulls hard
For my is350 with 290k miles I just use redline si-1 every 3k miles ( filling up from empty) and 93 from sunoco. I just recently started using 93 from sunoco and it pulls waaayy harder
Pro Tip: its recommended to do an oil change after you run a full tank of gas with the fuel system cleaner. (You should probably run 3 tanks w/ the cleaner at first then run one tank before an oil change)
did an oil change 2 days ago prior to filling tank w smaller fuel cleaner off camera 🤝🏾
6:34 doesn't the seafoam supposed to go into the vacuum hose?
no, either the intake manifold or throttle body
@@kwrizzz1lol, I was coming back to say nevermind..... I saw another video they did it the same way
Did your 250 ever get the moisture amp problem?
Never heard of such a thing
Where did you get the front bumper from ?
Also recommend cleaning the MAF sensor i was throwing misfire codes in my 2is and it literally was a dirty MAF
Try using chevron fuel treatment helps out clean out the catalyst and ur exhaust overall. Rotten egg smell went away and the random pops my exhaust make at cold start are going away
my car is catless - the problem is the carbon build up getting bad
dog if you want a real carbon cleaning you need to pull the heads and put it in a solvent tank. the other method that leaves the heads installed you use bg intake cleaner and hook it to shop air with it revved up to 3k so you have high temps and good airflow. the reason to do it from the throttle body is it distributes evenly.
👍🏾👍🏾
where the drag pack at? i’m tryna see sum
in the cart 🕺🏿
That brake vacuum port leads to half of your cylinders. Use the EVAP vacuum port instead.
What song you use for this one ?
My brother produces the music I use
Dawg that beat slide send me the sample 🤣
Don't you live in BR?
Correct 👍🏾✨
@kwrizzz1 that's crazy man iv seen you a couple of times headed to work I drive a black 370z with black chrome rpf1
Never seen u but I’ll keep a look out, sounds like a fire build 🙏🏾🫡
You feel that this works ?
It’s a temporary fix until u open the motor
🔥🔥🔥
Do the engine swap already Jesus like i don’t get it why keep the 250 Engine
this is my daily... pipe down
@@Extravagant_Grace definitely
Still a solid engine that sounds great just needs a little spice via turbos
@leonel9110 if money and resources wasn't an issue, trust I would've found someone to fab up somethin🤌🏾
That mugg is ugg.
👍🏾