PS2 Controller Port Fix

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 106

  • @triple_lei
    @triple_lei 6 років тому +36

    November 2018 and this helped me!
    This is also how all tutorial videos should be! No 30-second intro, no annoying music to drown out the actual instructions...

    • @treezy7567
      @treezy7567 6 років тому +1

      Justin Sison woahhh are u fr cause I was shady on trying it

    • @triple_lei
      @triple_lei 6 років тому +2

      ​@@treezy7567 Yup, the video explained the most important things: the problem (black flex cable loose) and the solution (disassembly and repair). So I popped open the PS2, found that cable, put it back in the connector, pushed down on the connector head clasp thing to lock (you will definitely feel it), reassembled, and I was good to go. I didn't need to tape the cable down or clean it or anything.
      How I originally broke mine was, I accidentally pulled the flex cable out trying to fit the PS2 in a Ikea Kallax shelf with a "Better Homes and Gardens Cube Storage Shelf, H" from Walmart. Turns out the PS2 is like 3 millimeters too wide for that, but I thought I could force it in anyway. Well, because I kept the PS2 unscrewed for easier maintenance, the bottom separated, and the top shell pushed the memory cards down, and _that_ pulled the flex cable out.

  • @treehouseRetrosNYC
    @treehouseRetrosNYC 2 роки тому +8

    Who knew a 12 year old video would come in so handy . You are appreciated!!! Hope you still have this channel lol

  • @robavailability
    @robavailability Рік тому +2

    Thank you for saving this ps2. Who would have thought a 13 year old video would save a ps2 from the landfill? This has been one of the best tutorial videos I have ever seen. You even said how the first time it didn't work for you and so you used tape. It was like you were here with me telling me what to do. I so much appreciate it guys.

  • @nipoji9975
    @nipoji9975 4 роки тому +11

    2020 and this video helped me thanks dude

  • @BADbamajama1
    @BADbamajama1 Рік тому +1

    I know this video is old but I may have to try that method my controller Port 1 works just fine its the controller Port 2 that's giving me problems u plug a controller in and it's shorts in and out. The analog button lights up then cuts right back off. I've opened it up cleaned both ports out and lightly cleaned the ribbon off. My game gave me the impression that it was working properly I tried it out before I screwed everything back in so I got very excited. Then once I screwed everything in and plugged it back up boom same problem again. So I don't know what else it can be. Maybe I will do it all over again and go to the motherboard like you guys did. Eh I might have to replace both ports and ribbon.

  • @kdxip1
    @kdxip1 2 роки тому +1

    12 years later and I have a question, since my controller port 1 does not work however controller port 2 does, I wanted to check if it was the controllers and tried 3 new controllers but it wasn’t the case all of them were not working, however they would work for a certain amount of time (preferably 2 minutes) and then shut down but whilst the analog flashlight is on. It also says please insert controller into controller port 1 for all three controllers, to conclude if I get a new ribbon cable can this issue be removed??

  • @NexusArtRealm
    @NexusArtRealm 9 років тому

    Great tutorial. Glad the video is still here after all these years. Thanks for sharing, bonnow.

  • @chriswilliams2743
    @chriswilliams2743 4 роки тому +1

    Thanks guys - nice vid. I looked at the flat controller lead in your vid & it had rust on it (someone spilt something!). Cleaned the contact points & it worked fine again. Thought it worth saying in case the actual strip is not broken, like yours was. Thanks for posting. :)

  • @arpitjain24
    @arpitjain24 13 років тому +2

    @bonnow sir my ps2 controller is not working analog light is on but the controller is not responding plz tell me what to do i hav used this method plz help me

  • @Carlos-mq9vo
    @Carlos-mq9vo 2 роки тому

    Jan 2022…..Was playing on my ps2 and suddenly in game the X button and few other buttons started not inputting on screen, when reset I have nothing apart from up and down on the d pad and the analogue on and off works! this is on both ports with two controllers it’s doing it with what do you think it is the ribbon cable???

  •  9 років тому +1

    TABS BENT
    I just bought one, a minimally used console, looks almost new, nice and clean, controller is not working. I looked inside the slot of the port connector on the front of the console, the left side metal tabs on both 1 & 2 controller ports are bent in, you can see it without taking the console apart, shine a flashlight in there, there should be 4 tabs, one of the 4 is bent in, like the controller socket pushed one of the tabs in for some reason. Why the tab bent I am not sure, a bad factory bend angle? So I am going to try to figure out the best way to bend it back out to where it should be, a small pick, or something.

  • @abdielramirez2102
    @abdielramirez2102 2 роки тому

    Hi! That cable is for the controllers port and the memory card slots? My ps2 is not recognizing the controllers and memory

  • @cesarramirez7619
    @cesarramirez7619 5 років тому +7

    2019 almost 2020 and I still use my ps2 way more than my ps4👻

  • @GUYI621
    @GUYI621 9 років тому +2

    I tried this on my ps2 and did exactly what they did on the video, but when I tested it neither controller ports were working and neither was the memory card slot ;-; Is there something I might have done wrong? And is there a way to fix it? :'(

  • @JurajKatalinic
    @JurajKatalinic 8 років тому +6

    Please help me !!!
    I have very special problem. X button and CIRCLE button doesn't work in Browser or System Configuration, only in-game. When I unplug and plug back in Port 2 Controller, the PS2 reacts like I pressed CIRCLE button. Day before was working fine.

  • @philipperry7606
    @philipperry7606 10 років тому +3

    Thanks guys, fixed my PS2. Was just about to buy a new one!

  • @Nines_XIII
    @Nines_XIII 13 років тому +1

    @MultiDragoonX Yes, I bought a new controller, and it won't work. Then I realized it wasn't because of the controller, but the port. So, do you know how much a new port costs? Or is it impossible to buy that single piece? Thanks! :D

  • @jasminepoteat4799
    @jasminepoteat4799 8 років тому

    my ps2 isn't really grabbing the controller tab. it slides in and out. the ports work, but it's only sliding in the controller 1 port. controller 2 port is grabbing and holding the controller tab. in other words, my ps2 female part is a little worn out and loose.

  • @lolforpokemon
    @lolforpokemon 14 років тому +1

    um my memory card port is broken also.........help?oh and by the way i took my ps2 apart and looked around b4 it broke and i acciedntly un plugged the thingy put i put it bank where it was supposed to go but still didnt work..........so now im looking at this video

  • @tomaszrozycki4219
    @tomaszrozycki4219 8 років тому

    i have strange issue, my dual shock dont vibre i heck it under pc and it is working no dameged cables, i thing ps2 slim do t give that much power to dual shock. Any advice?

  • @desireeinvisible
    @desireeinvisible 14 років тому

    Niether of the controller ports work on mine. However, they can be recognized, but it's as if the controller is malfunctioning... But I have tried multiple controllers that I KNOW work, and it is not the controllers. Do you think this will work for me, too, even if the ps2 CAN recognize controllers??

  • @boomcazoom
    @boomcazoom 15 років тому

    what about if i replace the little black thing with another one out of another ps2 that doesnt work

  • @elementarydrw
    @elementarydrw 10 років тому +2

    30000+ views... that's a lot of broken PS2's and bare people after home fixes!

  • @Wishfulldreamsofhope
    @Wishfulldreamsofhope 13 років тому

    Okay, my dualshock stoped working yesterday, I couldn't move up or down in the menu or press any button but in a games menu i could press up and down but not select with any buttons. Now I tried with my other controller but my ps2 doesn't respond to it in anyway except up and down in game menus. I tried back with my first dualshock and now I could move up and down and press buttons in the ps2 menu but the analog stick didn't work! I'm gonna buy a new ps2, but I'd like to know what causes this.

  • @Anonymous-mz4fn
    @Anonymous-mz4fn Рік тому

    my ps2 now is not giving video output to my tv and also the disc is not spining

  • @fatboygeorge0930
    @fatboygeorge0930 14 років тому

    The Holes In the port came out the ones where u connect it to the control is there a way i can take the holes from the second port and put it to the first one so i could play in the first port

  • @aibar97
    @aibar97 13 років тому

    hey i have one problem..i inserted the controller in the controller port but the controller never on....it work before this but now it doesnt work anymore

  • @cutemimi25
    @cutemimi25 12 років тому

    I got a fat PS2 but mine has 8 screws holding the case and the power supply is on the bottom not the top.

  • @96Brand
    @96Brand 3 роки тому

    Link to the ps2 controller port i need a replacement?

  • @MultiDragoonX
    @MultiDragoonX 13 років тому

    @NekroZack Have you ever tried doing it with a new other DualShock 2? I mean that have you tried another controller with the Game System?

  • @pantererosa4733
    @pantererosa4733 5 років тому

    Please guys help me! All of my controllers suddenly stopped to work! Levers work but no touches (X or triangle or something). And sometimes I succeed if I push so strongly. Can u suggest me what could be the problem and how can I fix it? Both ports don’t work. Thanks a lor

  • @cutemimi25
    @cutemimi25 12 років тому

    Not that there's anything wrong with it I'm just pointing out a few differences between the 8 screw model to the 10 screw model (I had a 10 screw model but it was broken so I replaced it with the 8 screw model which I currently have now).

  • @MultiDragoonX
    @MultiDragoonX 13 років тому

    @NekroZack Actually according to my knowledge it's impossible to get a spare part of a PS2, the only hope is to buy a new PS2 if any part has failed, but there is a solution that youcould give your PS2 for repair to that shop from where you bought it...
    My controller port also malfunctioned, I thought of watching this video for help but my model of PS2 was unfortunately 2006 and the inside was different
    but I opened it myself and cleaned it a little bit, and it was working better than before!

  • @Nines_XIII
    @Nines_XIII 13 років тому

    Hey! Um, I have a different issue with my PS2. It seems that the problem IS the Controller Port, but in my case, it recgonizes when a controller is plugged in, but in has problems recognizing when I press any button! Could it be that my port is beyond repair, or if it's possible to repair it, what do I need to do in order to repair it? Also, how much does the Controller Port (that piece itself) costs? I'm not sure they even sell the whole port, but if they do...how much will it cost? Thanks man!

  • @Thunder_Light207
    @Thunder_Light207 3 роки тому +1

    Ingenious well done 👍 that controller block has a horrible compression fitting that loves to break apart, you can insert thin plastic sheet .1 or .15mm to get the tight contact back

    • @leviackermann9669
      @leviackermann9669 3 роки тому +2

      Is yours fixed? I’m about to try it on mine... hopefully it works.. I want to play games on my ps2. My port 1 doesn’t work but my Port 2 does and In order for me to play games the controller port 1 has to work smhhh

    • @Thunder_Light207
      @Thunder_Light207 3 роки тому +1

      @@leviackermann9669 hya , i fixed it 100% ok using a thin sliver of plastic which I inserted into the top gap, this forced the ribbon down onto the contacts, rubbish connector (!) Best way is to leave this alone until u dissemble motherboard, then you can easily disconnect the mobo connector. Also the ODD best way is to dissemble this to laser deck, then easily connect bottom ribbon connector thru laser deck, way easier. Lovely system bar these 2 fiddly connectors 😜

    • @leviackermann9669
      @leviackermann9669 3 роки тому +1

      @@Thunder_Light207 heyyyy I just fixed mine!! Works 100%

    • @leviackermann9669
      @leviackermann9669 3 роки тому +2

      @@Thunder_Light207 see all I did was unscrew the ps2 a reposition a couple things on the ps2 controller port and it now it works

    • @Thunder_Light207
      @Thunder_Light207 3 роки тому +1

      @@leviackermann9669 u r a bad boi 😜 congrats on fixing ur system, i love servicing ps's really satisfying 🎂 Got a 2nd hand ps3 fat off ebay which I'll strip down next week, amazing how these great systems r so cheap now, thanks to the crazy ps5 prices ... Ouch! 😸

  • @oiscout11
    @oiscout11 13 років тому +2

    Hey everyone! If you look inside the controller port of the plastation you see three metal prongs now this is what happened to me i thought was that ribbon thing but it turns out ine of my metal prongs was bent out of position so i put it back and my ps2 worked!!

  • @Wishfulldreamsofhope
    @Wishfulldreamsofhope 13 років тому

    @kyle247i How the hell did you open you'r PAL ps2? The ports keeps mine from opening and I don't know how to get it open! D8

  • @big14black
    @big14black 13 років тому

    My controller port 1 has been not reading my controller so I can't play all of my games. I need help What should I do?

  • @PuppyEars11
    @PuppyEars11 11 років тому +5

    Thanks so much! It worked and my boys think I am awesome once again!

  • @therealBALLOONKNOT
    @therealBALLOONKNOT 12 років тому +7

    how'd you train that gorilla to use the screwdriver tho?

  • @Allious131
    @Allious131 5 років тому +2

    july 2019 and this helped me very good video

  • @brobroant6205
    @brobroant6205 3 роки тому +1

    There’s literally nothing on the internet about fixing the damn thing wth

  • @nyarlatothep666
    @nyarlatothep666 9 років тому

    I am faced with very weird issues. My PS2 controller doesn't get recognized by all games. For example Kengo works fine, Ace Combat 4 and Mercenaries: Playground of Destruction don't recognize it. Has anyone ever faced such a problem? Also, the PS2 reads Kengo without problem, sometimes it cannot read Mercenaries, and it almost always fails to read Ace Combat 4 despite all CD's being in a similar good condition.

    • @LucasDMX1
      @LucasDMX1 9 років тому +1

      +nyarlatothep666
      I have the same issue as you, the model I have is the slim one, the controller port 1 work only playing nes emulator on ulaunch elf and some games, it work perfect on system config menu. I opened up the console and cleaned the fuses on-board near the controllers port and the slot solder with rubbing alcohol, i used 100% isopropyl and now works perfectly, because the dust and oxidation can cause bad contact

    • @tomaszrozycki4219
      @tomaszrozycki4219 8 років тому +1

      LucasDMX1 I hope this will help with not vibrating ds2 (under pc is ok) and 3party is ok but week vib ;/

  • @billbobgruch
    @billbobgruch 5 років тому +1

    Try and unplug and replug first so you don’t have to cut anything. I just did that and my player 1 port started working again

    • @adultmoshifan87
      @adultmoshifan87 4 роки тому +1

      Hope that may be what I need to do, just got my PS2’s laser and AV out fixed, and hot a mod chip installed!

  • @juannanez6790
    @juannanez6790 4 роки тому

    I followed this now my tray won't open.. Also it only lifted up the top

  • @cymruboy98
    @cymruboy98 11 років тому +3

    My controller wont work, the analog light will light up but wont work please can anyone help me ?

    • @rowellbayuga9029
      @rowellbayuga9029 8 років тому +2

      same issue with me..any one can fix this..plzz

    • @rocker-barrel4786
      @rocker-barrel4786 6 років тому

      rowell bayuga me too. Im very annoyed i wanna play my game.

    • @dylanpotter9919
      @dylanpotter9919 5 років тому

      Don't plug the remote the whole way in, keep pressing the buttons until you find the right spot as you put it in

  • @griseldaespinoza8810
    @griseldaespinoza8810 8 років тому

    what about if the first controller port dosent work on ps2slim

    • @eminmuhammed8485
      @eminmuhammed8485 6 років тому

      mine too, the second and first ports work if I use a fake playstation 2 controller, but when I use a real one, it does not respond in the game.

  • @boyboy2000ful
    @boyboy2000ful 14 років тому

    so does this work for the slim

  • @MarcoVenustus
    @MarcoVenustus 11 років тому

    My controler port isn't sending the info of vibration to the controllers (only port 1), and I couldn't fix it 'cause mine is slim, and the port is attached to the mother board :(

    • @tomaszrozycki4219
      @tomaszrozycki4219 8 років тому

      Marco Aurélio Dantas i have similiar issue official dualshock2 dont vibre but 3party works ;/ ds2 is working under pc strange.

  • @arpitjain24
    @arpitjain24 13 років тому

    @puddintatter098 me too i also have the same problem analog light is on but the controller does not work plz help both of us i am 13 so plz tell simple

  • @dinaabimbola4547
    @dinaabimbola4547 3 роки тому

    Ps2 slim controller port 2 not working.. Solution

  • @vinnies4497
    @vinnies4497 6 місяців тому +1

    thanks man I love you

  • @abdulazizalmalki5830
    @abdulazizalmalki5830 12 років тому +1

    this does not work on the 5000 models

    • @jesusrom3913
      @jesusrom3913 5 років тому

      why not working? Is other malfunction?

  • @MultiDragoonX
    @MultiDragoonX 13 років тому

    @NekroZack You should try that too, I hope it helps, if it doesn't then ask me again :D

  • @r3p3nt44giv3n3ss
    @r3p3nt44giv3n3ss 11 років тому +1

    Had the exact same issue , duck tape WON'T work cuz it must make constant pressurized contact with the motherboard port. I used the point of a very small flathead screwdriver. You MUST be very gentle when forcing the end of the cable DOWN in the port till it doesn't need to be clipped in, but clip it in anyway. Free mcboot psx-scene(dot com) is the way to go from here, but you might have a lil trouble getting it fully installed, but perseverence pays .

  • @chazchapman9350
    @chazchapman9350 12 років тому +1

    hey i used the same screwdriver on my ps2

  • @mill2670
    @mill2670 4 роки тому

    May 2, 2020... bro this really help but I was trying to fix the game all day an my little bro came in start help am broke the nob that is suppose to click down on the ribbon, so i now have a bigger problem...

  • @yungjavier
    @yungjavier 10 років тому +4

    Cant get mine off

  • @volkte37
    @volkte37 14 років тому

    Great video. Mine can be intermittent so may need to do this. Thanks!

  • @UserL1559
    @UserL1559 5 років тому +1

    I will check this.I have this problem

  • @ruizhernandeztrustfi
    @ruizhernandeztrustfi 8 років тому +1

    Nice!
    Thanks for the tutorial.

  • @stomachcontentz
    @stomachcontentz 7 років тому

    Thanks guys this helped me avoid damaging the PS2 while i opened it. My problem was the same. One controller worked erratically. Bought new controller. The new one didn't work at all! At that point I knew it was the PS2. Popped it open, and simply detached the ribbon cable from the Port board (on both sides), blew on it a couple of times and then reseated it properly. THAT WORKED! Perhaps heat/cold over time slightly loosened it. So happy. Thanks!!!!!

    • @soultombs5344
      @soultombs5344 Рік тому

      This comment was my last hope, the ribbon didn’t appear damaged so I just cleaned it and reinserted it properly, and whattaya know , it works 🥲

  • @arikhomi3092
    @arikhomi3092 12 років тому

    ,my controller is wireless its legetick

  • @Hchris101
    @Hchris101 2 роки тому

    Cool channel

  • @arpitjain24
    @arpitjain24 13 років тому +1

    @kyle247i hey man my ps2 is also pal !!!! and the same thing which u said except about the controller port!!!!!!!

  • @Yipyip305
    @Yipyip305 11 років тому +2

    I bet this is my problem

  • @rodrigotorres8634
    @rodrigotorres8634 8 років тому

    are you guys twins?

  • @keithevans3544
    @keithevans3544 6 років тому +1

    In no way, shape or form does the cover come off like this video describes. I have the exact same PS2... it requires 8 screws to be removed, not 6, and there is still something holding it on in the front. I still have yet to remove the cover.

    • @keithevans3544
      @keithevans3544 6 років тому +1

      OK, what these two meatheads don't tell you is that there are two screws on the underside (or top side really if the PS2 is in it's natural position) that need to come out too. You need to take the cover off the other side as well to get to these additional two screws. Once I removed them, the cover came right off.

    • @robavailability
      @robavailability Рік тому

      I thougth that at first but you only need to remove six to make the bottom come off.

  • @anuragthawait3573
    @anuragthawait3573 6 років тому

    superb bro

  • @stringer3697
    @stringer3697 5 років тому

    thx

  • @cechonadida
    @cechonadida 13 років тому +1

    polish

  • @elementarydrw
    @elementarydrw 10 років тому

    *brave

  • @sw1tch4lb
    @sw1tch4lb 13 років тому

    This works with scph 35001? thanks dudes!

  • @kingmike6501
    @kingmike6501 2 роки тому

    This helped just bought one cause I wanted to finish my old game since I was a kid, thanks guys 🫡