I have zastava m85 and haven't so far had any issues. Watching your video convinces me it's the ammo, not the rifle. Or something with a magazine spring or recoil spring having to much tension. But keep it simple, it's most likely the wolf ammo their brass ammo is suspect at best here of late .
Have you tried the new PSA AK 101 5.56 30rnd metal reinforced mags yet? They are based of the Russian 101 slab side mag they seem to work really good so far
Sorry for your bad luck. These 556 Jack's and the kit (cg556) builds are being highly praised! I only run wbp,beryl, and filed ((10))'s in mine. I bought a m70 once that short stroked and was waaay undergassed. Shit happens:(
I was thinking something similar....Thinking either 1.mag sits just too high and not letting bolt move freely 2.weak spring not pushing bolt hard enough to lock around casing (also ties into option 1) 3. Maybe just bad extractor claw?? I lean toward a mix of both 1 and 2..Especially seeing that the bolt is denting the casings in the mag...definitely seems the bolt is riding top of that magazine a bit too much.....hopefully AOA figures it out soon.
I hoping so..They seemed real cool about it over phone...Watched this vid n asked some questions...Said shouldn't be issue to figure it out...I also have been staring down a Beryl...But someone also told.me.they had this exact issue with one..So idk what to do...lol
I am sorry you are having issues and this video showcases to me the wisdom of buying my Zastava M90 with it's adjustable gas system. I have also switched over to using superior AK74 mags and installing 5.56 mm followers, a much better fit and function.
Already sent it of....I have a lil bit of "5.56" but had mostly an assortment of .223 Thinking it's a bolt or magazine height issue.....Will find out soon I suppose when they contact me. But thanks for watching 👍
You should never run brass ammo after steel. Brass expands at a faster rate than steel. When you run painted steel cases, they dont expand and get a lot of gas blow-by in the chamber. The brass cased ammo will swell and grab this fowling. Give it 2 seconds to cool and it will shrink and extract without isssue. This may not be 100% your problem, but by running brass before steel you can at least eliminate this variable. This is a common problem for guys that run steel in AR's.
Maybe the extractor is not grabbing the case. perhaps a new extractor and extractor spring is in order. Honestly I'd send it back because how much money in troubleshooting ammo are you in and even if best case extractor did fix it, how much money would you have to spend to be confident in it again or will you ever feel full confident with it and it's just a toy if you cannot trust your life to it and you paid for a rifle you can trust your life with I'd assume. Ammo sentivitiy is not an excuse because we know aks should eat all ammo.
It on way to be "Fixed" now....I was thinking maybe the bigger paddle mag release may have been seating mag a bit to high and was slowing bolt down to wear like you said "not locking claw around casing"...but hopefully they can figure it out and get problem fixed
I have a Jack 556SR and I havent had any of these issue with brass or steel cased ammo. Havent had one hickup about 1000 rounds in.
Just rub it in my face why dont ya!!!
Mines off for repairs..hoping for the best
I have zastava m85 and haven't so far had any issues. Watching your video convinces me it's the ammo, not the rifle. Or something with a magazine spring or recoil spring having to much tension. But keep it simple, it's most likely the wolf ammo their brass ammo is suspect at best here of late .
Thanks for watching...The problem has since been resolved and this WBP is fantastic!!
WOlf gold is underpressured?
I'm no gunsmith....Just a guy who loves to shoot trash...Sent it back going on 2 weeks ago.....Just want a working rifle back. 🤞🤞
The clear C10 mags are known to be sketchy
Weak extractor spring...? When he spent case is driven back over the new case, the tension between them makes the extractor "slip"
At gunsmith at moment....Hoping they have a fix on it sooner than later.
Any update on the jack? Send off for repairs?
Sent it off going on 2 weeks now.......Still waiting...Anxious n irritated..lol
Have you tried the new PSA AK 101 5.56 30rnd metal reinforced mags yet? They are based of the Russian 101 slab side mag they seem to work really good so far
I have not....I'll look into that..THANKS!!
Are the mags madr for 556?
Think it just doesn't like wolf ammo. Wasn't it wolf in part one?
Yup
I wouldn't run an Ak that doesn't like wolf ammo. Glad he sent that off to get fixed.
Just ordered the Jack.
Sorry for your bad luck. These
556 Jack's and the kit (cg556) builds are being highly praised! I only run wbp,beryl, and filed ((10))'s in mine. I bought a m70 once that short stroked and was waaay undergassed. Shit happens:(
Yeah...Really hope my WBP gets fixed soon 🙏
Almost looks like it's the mag, a weak spring or just doesn't like the follower
I was thinking something similar....Thinking either
1.mag sits just too high and not letting bolt move freely
2.weak spring not pushing bolt hard enough to lock around casing (also ties into option 1)
3. Maybe just bad extractor claw??
I lean toward a mix of both 1 and 2..Especially seeing that the bolt is denting the casings in the mag...definitely seems the bolt is riding top of that magazine a bit too much.....hopefully AOA figures it out soon.
Also....Thanks for watching 👍
Hopefully that gets sorted . I'd like to get myself a beryl at some point sooner than later
I hoping so..They seemed real cool about it over phone...Watched this vid n asked some questions...Said shouldn't be issue to figure it out...I also have been staring down a Beryl...But someone also told.me.they had this exact issue with one..So idk what to do...lol
I am sorry you are having issues and this video showcases to me the wisdom of buying my Zastava M90 with it's adjustable gas system. I have also switched over to using superior AK74 mags and installing 5.56 mm followers, a much better fit and function.
Thanks for watching!!
Try running 556 through it.
Already sent it of....I have a lil bit of "5.56" but had mostly an assortment of .223 Thinking it's a bolt or magazine height issue.....Will find out soon I suppose when they contact me. But thanks for watching 👍
A lemon unfortunately. Hope it's fixed and running already.
It's not....AOA been holding it 2 months almost...still not fixed...it's a sore subject
You should never run brass ammo after steel. Brass expands at a faster rate than steel. When you run painted steel cases, they dont expand and get a lot of gas blow-by in the chamber. The brass cased ammo will swell and grab this fowling. Give it 2 seconds to cool and it will shrink and extract without isssue. This may not be 100% your problem, but by running brass before steel you can at least eliminate this variable. This is a common problem for guys that run steel in AR's.
Noted....Problem has sense been resolved,chamber was just rough and held everything.
When an AK doesn't run. Makes me sad.
Sad...followed by angry
Just got the 74 556 sc style straight gas block...fine popper....WBP👍
Where'd you get your cool hoodie???
Wethepeopleholsters.com
Tell em I sent ya.....won't get any deals but maybe we will both get a free hat or something...lol
@@Midwest__Savage AWSOME...keep up the faith brother....
Will do!!! Thanks for watching and the comment!!
How do you like the sc version? I've seen them on the site for a while. Was interested but wondering why they aren't selling.
This is a jack.
Um...yes? Is that a question?
Zastava= lol... I remember my first beer bahaahahahaha
Maybe the extractor is not grabbing the case. perhaps a new extractor and extractor spring is in order. Honestly I'd send it back because how much money in troubleshooting ammo are you in and even if best case extractor did fix it, how much money would you have to spend to be confident in it again or will you ever feel full confident with it and it's just a toy if you cannot trust your life to it and you paid for a rifle you can trust your life with I'd assume. Ammo sentivitiy is not an excuse because we know aks should eat all ammo.
It on way to be "Fixed" now....I was thinking maybe the bigger paddle mag release may have been seating mag a bit to high and was slowing bolt down to wear like you said "not locking claw around casing"...but hopefully they can figure it out and get problem fixed
@Midwest__Savage hope so, my friend. Always happy to see people using and enjoying their 2a rights.
I'm sure there will be a PART 3 eventually..👀
some guns just wont work with some mags or ammo. Just stay away from those kind of mags or ammo.
Hall Shirley Hall Maria Perez Karen
that is a bad mag for that gun. that mag is a boom when it dos that to the ammo. stop using that mag with that gun.