How To Make A Fancy Nylon Stockwhip
Вставка
- Опубліковано 1 жов 2024
- Hello friends, in this video I’ll be showing you how I made this 5ft fancy nylon stockwhip, and how you can make one too! As always, it’s important to state that I am not by any means claiming that this is the only way to make a fancy plaited stockwhip. Instead, this is a method that has worked well for me, and that I’d like to share with you. Modifications and alternative methods that you find work better for you are always encouraged, so if you feel like there is a better material/method anywhere throughout the build, please let me know in the comments. The handle and the thong of this whip will be plaited with Whipmaker’s Cord. The handle is 18 plait, and the thong is 16 plait.
The process of filming this tutorial has been by far the most challenging production that I have ever created for this channel, and I have done my very best to film in detail, every step to the best of my ability. Although this project is quite involved compared to others on the channel, don’t let it scare you! I’ll be building the entire whip right along with you in real time. All tools and materials needed to build this whip are listed below. In addition, I am excited to announce that I am giving away the final prototype that I made while designing this whip, and all you have to do to be entered to win is… 1. LIKE THE VIDEO and 2. LEAVE A COMMENT. Complete those two steps, and you will be entered into the drawing. All countries are eligible in this international give-away, and I will be drawing names in exactly one month. If you feel that these videos are helpful to you, your support is greatly appreciated and allows me to continue making them. You can support my channel here ► www.paypal.com.... I’m glad you’re here! Sit back, relax, grab your supplies, and join me on this whipmaking adventure!
-----
Use This Link For The Handle Pattern Guide ► www.whipinfo.co...
Use This Link For The Thong Pattern Guide ►www.whipinfo.co...
--------
:::You will need the following paracord to complete this project:::
233ft Of Whipmakers Cord
39ft Of 550 Paracord
6ft of type #1 Paracord
Purchase your different cords with the links below
--------
MATERIALS
2-Part Epoxy ► amzn.to/3sKZjSm
120 Grit Sand Paper ► amzn.to/3Z8WB54
Brown Packing Paper ► amzn.to/3Zd04Q7
Spray Adhesive ► amzn.to/3rdJK53
Artificial Sinew ► amzn.to/44LAhQ6
Hockey Tape ► amzn.to/45Xdn9w
Whipmaker’s Cord (USA) ► theparacordsto...
Whipmaker’s Cord (outside USA) ► www.boredparac...
1/32in Lead Sheet ► amzn.to/3Rfea1G
1in Round Aluminum Disk ► amzn.to/3PvNmJe
Ball Chain For Core ► amzn.to/3sKoLr1
Neoprene Rubber to help Roll Whip ► amzn.to/45IU8AP
Parafin Wax ► amzn.to/3Z83Ie4
550 & Type 1 Parachute Cord ► theparacordsto...
5/16in (8mm) Driveway Fiberglass Stake ► amzn.to/3Rg8io... String Great For Crackers ► amzn.to/3Rb0DrK
Electrical Tape ► amzn.to/3sS915b
-----
TOOLS
Custom Metal Stamp for Metal Stamping ►amzn.to/488CHv0
Numbered Metal Stamps ► amzn.to/465ipRB
Utility Knife ► amzn.to/3PvhpAA
Tape Measure ► amzn.to/3PtKk85
Caliper ► amzn.to/460qLcV
Lighter ► amzn.to/488DeNw
Scissors ► amzn.to/45X8nSZ
Stapler ► amzn.to/3Rery6a
Small Hammar ► amzn.to/45ZCkRM
Tin Snips ► amzn.to/3P5F617
Portable Vice/Clamp ► amzn.to/45UnXOQ
Torkey Roaster For Heating Wax ► amzn.to/3Z5KXYR
Paracord Lacing Needle ► amzn.to/44IeZmK
Fid ► amzn.to/3sQ18gC
Hemostats ► amzn.to/3Z7o8DW
Thermometer For Checking Wax Temperature ► amzn.to/3EvVliV
Hack Saw ► amzn.to/44NBiax
Metal Yard Stick ► amzn.to/3Zc8CGT
great job ! hope to win cause i won't be able to do it for now XD
Congratulations @Bleiz39! You won the drawing for the stockwhip give-away!
@@NicksWhipShop woooo ! seriously !? I can't belive it... thank you so much !
I remember making my first 6ft whip with your tutorial when I was in the 6th grade and it’s super nice to see how far your channel has come.
Same here bro, exactly the same
Thank you both very much!
I've followed a lot of your tutorials and made most of your whips. My all time favorite is the electrical tape and BB one. That thing EXPLODES when it cracks. Very underrated method IMO. Seriously, use Scotch 33+. It would work much better than that brown paper glued to that handle.
I love these videos, if it weren't for them I would never have been able to build my replica of Indiana Jones bullwhip
thanks for inspiring
It finally clicked for me who your videos remind me of: Nick, you are a modern day Bob Ross. Not only is it incredibly relaxing to watch you work, and your voice is so soothing, but it's really the fact that you are always so positive and encouraging to beginners that reminds me of him so much. Thank you for your amazing work!
I've been using your videos and teachings to make myself a better whip maker. My custom handles are proof of that. Thank you Nick.
Thank you brother!
Awesome video as always! Full plait stocks have been my favourites for a bit now so it was great to see your take on them!
Why didn’t you use athletic tape, to make the handle thicker?
Hey Nick! Greetings from central Iowa...making an 8ft whip with a black and white whipmakers cord overlay with a checkerboard handle all while watching!
@nickswhipshop have you thought of just layering hockey tape instead of paper? Hockey tape is almost exactly 1 inch wide.
Hey Nick! I love your videos! Thanks for all your tutorials, they have been really helpful in growing my own whip business! I would love to serve you one of my whips so you could at least give me personal feedback if not a video! I hope you see my comment Nick!
EPIC video man. Well done. Tons of great information throughout
Thank you as always
This haves to be the coolest thing! Just watched a whip live stream while me and some other people were talking about what you have been up to in the past while, you showed up on the stream to apart of an awesome experience. To make it even better, I had a feeling to check your UA-cam channel and I see my dream tutorial waiting😁 Now that’s what I call a day made in Heaven
Hi Nick. Is it possible to make this whip from gutted parachord? If so, what things would I need to modify? I would like to make it for a family member. I’m fairly new to your channel. I’ve watched a few of your videos including this one. I just realized I wasn’t subscribed till just now. Thanks in advance if you see this comment and have time to reply!
Just a note about the strand drops: if you start the herring bone in U4O5 instead of U5O4, it lets you make a clean drop to 16 plait U4O4 without a double strand overlap, and U4O4 also lends itself cleanly to drop to 14 plait U4O3.
Thanks a million Nick, keep it up. I’ve learned so much from you about the whip world, both utilization and creation, and produced a few nice whips.
Love watching these videos, I work with cattle in close proximity and I think a whip would help in a few situations but I have not bought one because I really don't know what length would work best. If you have any suggestions, I would appreciate it. Since I am on foot and within 10-15ft of them... I think a shorter whip would work best.
I would've commented even if there wasn't a giveaway. This whip is beautiful. I think the "paper-taper" is brilliant! lol I haven't gotten my hands on some whip maker chord yet, but I hope to sometime, hopefully soon. Thanks so much for these tutorials!
Glad to see your post... been a long time. EDIT: I washed my hands thoroughly after just watching this video...
Love your work! Already made a few bullwhips myself following your tutorials.
Greetings from germany!
I have been following your tutorials for at least the last 4 years and have learned so much from you. I have built several whips and have taken the knowledge I have gained into several other similar projects. While you were tapering the handle, you asked if we had any suggestions for alternative materials to the packing paper. Have you ever worked with 1 & 2 millimeter thick craft foam?
Hey nick I was wondering what formula you use to determine what length you need for each strand of a braided layer when you have...
1. The number of braided layers
2. Number of strands per braided layers
3. How long the whip is going to be
And also I need help determining how many braided layers I need per whip design when I know the length.
And also how many strands I need for a given belly determined by the amount of strands from the overlay. Thank you and i love your videos im learning so much.
Hey, Nick. You've been an inspiration for me this last year I've been making whips, I've learned so much from your videos. I've still got a lot to learn, but I'd love to be entered for the giveaway
Incredible work Nick!! Thank you so much for your dedication to our community and for always sharing your knowledge. We are very lucky to have you!
Thank you Justin! As soon as I get my passport renewed I'm coming up to visit you guys.
@@NicksWhipShop Our guest room is always open man. Come by any time!
@nickswhipshop why not just use hockey tape to increase the diameter of the handle rod? Would also give it a nice sticky surface. If you want to you could also use kraftpaper tape. That's actually a thing. Basicly it is just what you used but it's pre glued and comes in rolls. I use already tapered fibre glass rods to plait riding crops. That would probably be the easiest way to design the handles core.
I love watching your videos, you're like Bob Ross with whips... I've got a question, how would you attach a monkey fist as the butt of the whip?
Now I regret Truly, the first time in my life, I have like experience like a shock of ego sort of speak. I don’t know how to explain the words enough to someone considered the Bob Ross avoid making but very cool with my guy very heavy nod to you sir
I'm curious as to why you doubled up on the keeper. In you Adam Winrich stock whip video you fed the strands through the loop. Can you do the same for this build and do the fancy plaiting the same way?
Any information available on when and where the next whip convention will be? I have several whip I have made, with variations from your pattern. Would like comments from experienced people who crack whips on where I can improve my whip making.
Thank you for teaching me how to make the whips ❤❤❤
From James youngblood in Colfax Louisiana
Always look forward to seeing your videos
I have been watching for years and you are the reason I have been making Whips’s for years now I have made some where around 50 whips and walking sticks with plaited handles.
Would duct tape work to make the thickness of the handle?
I was thinking of using something like an aluminum or stainless steel rod and duct tape (just get like 1inch type).
Hockey tape is 1" wide, lightweight and comes pre glued for wrapping nicely around the shaft. it also provides a tacky surface to plait over. I'm not sure how you ended up making your own tape before just using tape to create the taper. 😂
Hey Nick, have you ever thought of using drum sticks for the handles? I feel they woyld be almost perfect considering the tapered shape and nib on the end of the sticks.
I really enjoy watching your vids I’ve already made a couple whips myself , the only problem listening to you speak is so relaxing I fall to sleep while watching so this video will take me hours to watch 😊
I've been following your videos for a while now and this is another great tutorial! Hopefully I'll get a chance to make a stockwhip like this sometime soon.
thank you for the time and effort spent. i am fascinated by it, and could probably build along without much trouble. that you've left out no detail is very encouraging. i will begin gathering the materials. silly for me to not have a single whip when i have the skilllset from my other braiding to help me along.
Sir I have some roo hides from years ago. I've tried to get in touch with Drew's whips for 2 decades. He never responded. I met him back in the late 90s. If your interested in a trade, if the hides are still good, please let me know. Thanks.
Really appreciate your great work :) Newbie here but thank you for the all the info and if theres an LA whip conv next Jan I'll be there, hope to meet you.
Soon I discovered that this rock thing was true
Jerry Lee Lewis was the devil
Jesus was an architect previous to his career as a prophet
All of a sudden, I found myself in love with the world
So there was only one thing that I could do
Was ding a ding dang my dang a long ling long
these are awesome, im looking to make some kind of microwhip using 750typeIV as core then some 3mm coreless as belly, thanks for these videos it helps a lot with practicing the separate stages of the whip making
I know an alternative to that paper-wrap.
You can take artificial sinew or waxed lacing tape and spiral it closely together (closed-loop binding) so it adds more stifness to the rod and will have a more pronounced taper after adding the paracord layers
Awesome tutorial, thanks a lot.
I've recently been at that gasometer in oberhausen, and asked if they would mind if I crack my whip in there and it was totally ok for them.
They told me about your time there and were still in awe of that special moment of the very first crack.
thank you for the vid. everything I know about whipmaking, I learned from you. Thank you
So glad you Are walking through the eye setup because I struggle with finding any sort of other instructional video on this sort of weird so I appreciate it very much. It’s too bad you don’t have it up on your patron or is your patron still working?
I would like to Do this but i dont have access to your special cord in my country. Can I use normal paracord instead? Mby paracord type II ?
I was wondering if you can make a blueprint of materials used in this whip and the bull whip btw I’m in the process of making my first bullwhip in my shed
Love the channel and ive even got friends ive brought into the hobby watching you and learning… can i post a pic in this comment??? I would like to show you my latest whip…
Love your work and the fact we have the same favorite personal colors red and black lol ima copy it but me and my wives(yes two) have decided mine should in bored paracords haunted for black and cannibal for red or a rainbow color blend I make whips so that the colors and patterns hurt the eyes to look at lol I call it dazzlers or the dazzle method based on the move dazzle on dragons quest they have whip moves that are fun to imitate now that you have made me a whip maker thanks Nick love your work
I got to ask why do you think 16 plant is better than say 14 or 12 even? I think 12 or 14 makes a very good tight braid in my opinion around the whole thing for more rugged every day use but you seem to rely heavily on the 16.
love your videos, I have used some of your bullwhip and snakewhip tutorials to help me make some of my own whips but i was never drawn to stockwhips until i saw this tutorial and now im interested in giving them a go =) love from the uk
Love your vids. I wonder if using a pipe cutter to cut the fiberglass handle would eliminate the splintering issue.
Hello, could this whip be made from 325 paracord instead of whip makers cord?
Although I love the designs you made in this handle and In the fancy handle video but do they not look like a Christmas sweater to you Nick? Lol
Nick! We need you to come back down to Florida. The lizards are thick! - the family.
Amazing video tutorial as always! Such a beautiful stock whip
I have watched many of your video’s and you are really something when it cones ti making whips
Schell Silverstein, Cricket in Times Square. You are an old soul. You're also a good egg.
I like your videos and you’re very good with the camera, I’ve made 2 whips, first one not so good second one cracks great
Hello from Germany, I love your work and your videos. You inspired me to Bild, my own whip.
I don't know if this was intentional or if it is brought up later on the video, but I think there was an incorrect marking on the pattern.
At 1:08:45, I think that pass should have started with an over 2, not under 1 over 1.
Awesome videos, I was able to follow another video of yours and created a beautiful whip for my first time!
great video, have tried making a few whips, and had some issues, but sitll learning, and you videos are are a great reaource.
That's my boy
Hey you mention that one inch is going to be cut making the handle 19". I didn't see where this happened.
Nick can you please tell me how to get a hold of you to purchase a Web I want to get one made from you like a 8 foot whip bullet would be cool but I don’t know where to contact you at.
I have made a few whips in my life but all leather. Used them alot here in Australia for stock work.
Great video as usual. They are very inspiring and soothing. Keep up the good work.
This is the best tutorial I've seen yet for new whip makers like me hands down! Truly am thankful that you do all of this work and share it for free. Keep up the good work👍
Thanks so much!
it is a baby northern water snake. they are completely harmless but there teeth bend both back and forwards so their bites kind of stink compared to other species.
That’s my cousin nick he was popping balloons at are old house with his whip we were with the family
I see the supervisor had a cameo about and hour and a half in and let the audience know what they thought about getting less attention than the paracord got...
Thanks for making this! Definitely makes me want to try giving fancy plaiting a go.
Reminds me of the great Bernie46’s videos. Even down to the table!
Nice Whip, Nick!
Greetings from Germany!
Thanks for introducing me to the world of whips and for the great videos!
Could you just use paper tape to build up the handle taper? I imagine it would work the same
That is super cool. I am going to give this a go this winter. Thanks for the awesome video.
I did my first whip watching your videos
Thank you for so many incredible videos, you’re one of the best of the best 👍
Thanks for all your work and tutorial
i was able to made my own whip thanks to you \o/
Long time viewer, it's been awesome to watch your journey!
Showing me the website was worth the sub. Keep going on!
Thanks for all of the great videos that you make Nick.
🎉🎉🎉 so excited to make this. Love your work Nick!
I like watching your videos on whip making
Another great tutorial Nick! Keep up the good work!
Nick,
I appreciate you for taking the time to share whipmaking knowledge. Your channel was is one that I reference most when I make my own. Friends liked the ones I made and I was asked to make more to sell to them, I’ve sold 20+ so far and have gotten pretty good in-person review from Adam Winrich when I met him at Texas Renaissance Faire. This boosted my confidence to create my own small business. I’m excited for the future! Thank you and all the whip maker communities so much!
Sincerely,
Eric Q
Nice love it i follow your videos always so detailed tanks Nick awesome work
I love watching your videos.
Very nice whip. You're a very good teacher. 😊
What an amazing craft. Thanks for the ‘lessons’
Super excited for this tutorial! I’ve been looking to up my game in making stockwhips!
Thank you for sharing your knowledge.
Thank you for doing videos like this.
Such a great video. So much good information.
Thank you very much! When I started building bullwhips in 2020, I came across your videos and they have helped me tremendously. And I'm pretty sure this video will help me build my first stockwhip. Keep up the good work
Keep creating Nick, love seeing new ideas.
Man everyone thinks i'm nuts watching a 4.5 hr vid making a whip😂😂😂. Love it, thanks for all the entertainment and knowledge. Sure hope to be able to try that whip in person. Cheers from Calgary AB
Can’t wait to build one of these whips.