How BIG is too BIG?! Will it FIT? Can I get it UP???!!! Lintels, wall plates and an Australian!
Вставка
- Опубліковано 5 лют 2025
- Get 20% off + free shipping @manscaped with code BUILDERS at manscaped.com/b... #manscapedpartner
Thank you once again to manscaped.com/b... for sponsoring this video.
Hi, welcome back to MR A BUILDERS! In this episode, we tackle the installation of corner lintels (also known as mitered lintels) and show you where to get them and how to fit them to give your project that extra edge. Don’t worry-it’s easier and more affordable than you might think! Plus, we meet our newest team member, a labourer all the way from Australia, who’s joining us for the next phase of the build. If you're following along with our DIY house build, make sure to tune in as we go through this crucial stage! Like, comment, and subscribe to MR A BUILDERS for more updates and future episodes. Don’t forget to turn on notifications so you never miss a new video. Thanks for watching!
Thank you to everyone who has donated a Super Thanks so far, ever! Every penny will be spent on Christmas presents for the kids that are in Birmingham Children's Hospital this Christmas. If you'd like to donate, go for it! Thank you!
Below is a list of links to various things that I've mentioned in the video, obviously including the link to the lintel company. If I've missed any of would like any more information on what you see in this video then please comment and I'll get back to you and update the list.6
We don't get paid of or any of the below, they are just links that we've found easy to find so please shop around for the best deal and if you find one, let us know!
This is where we got the corner lintels from:
www.harvey-ste...
Thank you Mike for helping with the above.
For all the other lintels on this project, we went here:
www.wadebuildi...
Thank you once again to Sarah for all her help with this and other projects.
The resin anchor product that was used in the video:
www.screwfix.c...
The unbranded rotary laser level:
www.amazon.co....
The Milwaukee angle grinder blade changing thingy:
www.toolstatio...
The links to the two previous garden renovation are here:
• From Ruin to Bloom: Th...
• I built this brick pla...
Thank you for watching!
Get 20% off + free shipping @manscaped with code BUILDERS at manscaped.com/builders #manscapedpartner
Thanks. Fantastic episode Adam, lots of grunting and hard graft 🙂👍
Ah mate that's ace! Thank you, TK. Really appreciate that. Take care mate.
Lovely stuff!
Dave, thank you very very much indeed! That is so generous, thank you.
Great to have another Wednesday episode.. cheers 🍻
No no no Brian, thank you! Hope you enjoy it mate, take care.
Thanks
Wow Mr King! That is amazing!!! Thank you so so much.
Welcome to the team Corby, I’m a big fan of your trouser presses.
Brilliant! If I wasn't contractually obliged to have this videos pinned comment be a Manscaped one then you comment would be it! I can't believe that I didn't think of that! Bravo!
Bought one of the angle grinder lockrings today - brilliant! Thanks for the tip.
Haha! Honestly?! That's ace!
Have a bit more for the kids! Great idea.
Ah Simon that's amazing mate. Thank you so so much.
Great to have you back, thanks for the kind consideration for Birmingham Childrens Hospital as a lot of us have connections with the excellent work they do. I have to credit you with the magnificent and complex work you are doing. ❤️ All the best Mike.
MIKE! How are you mate? Hope you're well and getting there with the house? Thank you for watching and commenting again, take care.
Great idea and a good charity choice.
That's great, Paul! Really appreciate that mate. Thank you so much.
Great to see the progress gents. I’m really looking forward to seeing the woodwork progressing & see it take shape. Looks like a great trade test of job. No idea how you can quote it and make it work but it’s looks a great one to be part of.
Great to see you’ve managed to get a labourer sorted. Shame you had to go to the other me did the Earth to find one!
Have a great week all 👍🏻
Cheers mate, really appreciate that. How's things with you mate?
@@Mr_A_Builders All good here thanks. Enjoying the English autumn trying to get all the outside work done before the weather turns. Have a good one 👍🏻
@SBODevelopments you too mate.
Thanks for the great vids 👍
Amazing Kris, that really is. Thank you so much.
Great video! Really like the dark flags chosen for the home garden.
Sit nicely against the brick flowerbeds.
Thank you, Don! I'll be showing them off in a future video soon! Hope you're well, mate.
Thanks
Nice one, Chris! That's great mate, thank you very much! £675 now! Take care mate.
When cutting threaded bar/bolts thread the nut on first below where you want to cut. Once cut undo the nut back off the bar/bolt this cleans the threads and the nut goes back on just as easy as if it was the manufactured end 👍🏻great video as usual keep up the great work cheers
Cheers man! Hope you're well.
Another great video 👍 Good to see you back on the job and getting some help with the labour 😊
Yes mate, some much needed help and company! Cheers mate.
Adam great for BCH my nephews son was saved and able to walk again after they diagnosed what several GP's could not awesome!
Mate that's great news! So happy to hear that. Glad he's ok mate.
Nice one. Big job this one. Didn't realise that it would be such a big job when you started. I'm looking forward to seeing you boys back together.
No mate, me either! And we're doing more than originally asked now too, so we'll be here for a while. Cheers Bryan, hope you're well.
Best ever Adam and your new mate Corby. Fantastic work. I agree about the laws of the land. Move a roof tile - rain. Pull off felt - deluge. Only place to do the job is below the gutter and down your neck and back. Looking forward to this roof. I'm a chippy and this looks ???
Cheers Andy! It's amazing isn't it! Utter the word roof and that's that, flooded! Yes the roof is a head scratcher, glad I'm not doing it! Thanks again mate, hope you're well.
Whahey Adam, where the devil you been? Long time no see- seems yonks ago you last posted. Good to see you back.
Hello Russ. I've been busy here mate getting it all ready for Richard. Really appreciate the message mate, hope you're well.
hello again been watching the other jobs as well great to see you back .....
Cheers lee! I always notice that you watch and comment, we really appreciate it mate. Thank you. Hope you're well.
@@Mr_A_Builders fine thanks great video will be nice to see the carpentry work on this one .... remember spiders need love to .... oh and nice choice on the garden slabs .....
Haven't used a tool on my mini grinder for years just grab the blade and unlock, the label is removable for better recycling
Same here. The nuts don't spin off, they tighten.
G’day Corby😀
On to the hall trimmer………. No I’ll leave it there😂
Excellent video again mate
Haha! Cheers man! Thank you for watching, hope you're well.
Tip when cutting threaded bar put the nut on to the desired length cut bar at the face of the nut Then remove the nut and it will clean the threads up
Good to see you cracking on with those extensions Adam. Winters coming fast, Rick is gonna be a bit damp doing those roof sections... is the job getting a lid ??
I don't think we'll ever have a lid, Woody. They are so expensive it's quite unbelievable. We'll be covering as we go, all will be revealed! Cheers mate, take care.
Regarding the studding / allthread... run a couple of nuts on the bar then cut the end off; when you remove the nuts they act like a die and tidy the cut end up so you can get nuts on again.
Question.. how do you get all four studs in so square. I would never achieve that and would end up having to encourage the plate on with a small hammer.
Cheers man! Oh there was some 'encouragement' going on, don't you worry about that! We just took our time and got them as square as we could but as you say, there's always room for persuasion!
That's a brilliant idea with toys and a very very kind jester. Could there possibly be a video of you buying the presents obviously delivering them
They'll definitely be a video of us buying them mate and also showing us taking them to the hospital, but not handing them out. I don't think we're allowed for one and secondly I don't have the emotional capacity to hold it all together!
@@Mr_A_Builders that's brilliant and thanks for another great video today
@DANFUN32 no worries at all mate. Thank you for watching. Take care.
havnt even started the vid yet but wanted to say what a lovely suprise it is , another vid on a wednessday
Ah cheers mate! Hope you're this jovial after you've sat through it! Hope you're well mate.
@@Mr_A_Builders not too bad Adam. im jovial enough. your assent of the scaffolding tressels was funny. not sure about miami vice, looked more hot fuzz to me. job is getting there. can wait for rich to talk us through what's going on there roof wise. its looks like a complicated one.
Those Milwaukee 14mm grinder quick fasteners are brilliant, no looking for the 2 pin spanner you just put down, fasten and loosen with no real effort (and the blade stays on)
👍
That's fantastic mate, thank you very much!
@@Mr_A_Builders you're more than welcome bud, thanks for all the top quality videos, I've learned a lot from you chaps. And thanks for putting the effort in for the kids, I've done a similar thing in the past for kids in care but I likely won't be able to this year, so it's absolutely fantastic that you are.
Nice to see Adam showing us some of his Parkour techniques 😄
Haha! I was never nimble in my youth and that was a lifetime ago! It took me 3 days to get over that one 'jump' on this video! Cheers Lester, hope you're well, mate.
@@lestercranmer2631 Parkour off Thunderbirds!
@TheDranny haha! Yes, me dranny!
If you are ever stuck having to use the cut end of threaded rod... If you thread a nut on before you cut it and then take the nut off it can help clean up the threads and make them usable. Or just go spend a fortune on a tap/die set. :)
Sod the fortune, I'll just do what you say! Haha! Cheers mate! Hope you're well.
Just chamfer the cut end with a grinder
well hello Adam where the he'll ya been it's not been the same with out m8 but loverly to see ya bk and what a video it was carnt wait for the next one ❤❤❤ just think it's better wen ya all together not the Richard boring but banter alot better well done to all the team 😂and
Hello Mick! I'm like a rat mate, never too far away! Thank you for your message mate, really appreciate it. I agree, we need to get back together soon! Hope you're well mate, take care.
Good to see you back, are the corner lintels made to order?
Thank you, Peter! Yes mate they are, tell them what you want and they'll make them.
Did the scaffs leave any long standards on site? You could put one diagonally across your corner and use it to take the weight of lintel as you slide where it needs to go.
when you cut the bar put the nut on 1st cut the bar and undo the nut happy days save you loads of work👍👍👍👍👍👍
Nice one mate! Hope you're well.
Nice to see you back Adam! Well done with that mahoosive lintel, a 3rd person may have helped with that one! Did I hear one or two old man grunts during that? 😂 Bloody weather doesn’t help at all. Just an observation, those jeans were a bit tight to clamber up on those trestles, you almost cut your circulation off to your manscaped area! 😮😂 See next week mate, have a good one!
Haha!!! Let's just say that thanks to Manscaped there's now a bit more swimming room down there!!! And as for the man grunts...I can't tie my shoes without making one nowadays!!! Cheers man, for this and for always supporting us, take care.
Hi Adam, how did you manage to drill them holes 500mm deep and keep them vertical at the same time, were the holes in the actual steel plate bigger than the threaded rod ? Looking forward to the roofing video's I think Richard will be answering a few questions from viewers. Keep up the good work 👏👏👏
We just took it slow and steady mate. I think starting with the small 10mm helped. It was only 230mm long, get that plumb and it's difficult to veer off when you go bigger. Cheers mate, hope you're well.
Another fab video … very much appreciate the extra time spent producing when its hard enough just doing the job !! ps please wear gloves !
Thank you, Laurie! Appreciate that mate. It's our pleasure providing people will watch! Take care mate.
Great ,learning ,from ya
Thank you, Commander. Hope you're well!
That resin is bloody good but still not great compared to others. Check your curing times vs temps before you apply a load, but vertical stud like that shouldn't see any load in real usage.
Nice one mate.
That medieval law is absolutely true.
Liike when i use my mitre saw the dust HAS to fly in my face ! 😊
That one dates back to the pre bible era, mate! Nice one! Thank you for watching.
sods law, rain when striping a roof, wind when dealing with felt or wide dpc. 🤣
Haha! Ain't that just the way!
A bit squeaky bum time setting that big bugger on. Hope the new labourer works out well for you. looking forward to getting a roof over it all now.
Too right mate, just like yourself when you were in your first week at shark school! Haha! Hope you're well, mate.
Just wondering if your going back to the basement build as it’s been quite awhile since any updates
Yes mate, definitely. Just need to sort out a couple little boring issues then we'll be back to show it all off!
That epoxy tube doesn’t go off immediately in the tube, you can put the lid back on and it’ll be fine to use down the line as all the mixing happens in the nozzles.
Neither parts will go off unless exposed to the chemical reaction e.g. mixing the two parts.
The nozzle will though. Only 1 nozzle with each tube
Ah sound mate, thank you. I've used it in the past and it has gone off but maybe that was an old tube and a different brand. Cheers man.
@@Mr_A_Builders I’m sure it’s the same stuff I’ve used in the past. Long story short I wrapped some cling film over the opening and screwed the cap back on, I thought it would be off, tried it out with the second new nozzle and it was fine.
However I can’t really say, how long it’ll last or if it will have an adverse effect on the strength etc.
As when I used it the same tube the second time it was only for in my own garden because I had a loose slab and couldn’t be arse re-bedding, so just cleaned up the area and put a few blobs and it was sound.
@@CraveThatCoin You normally get two nozzles per a tube, how long before the tube becomes unusable, I can’t state nor can I confirm if the product becomes weaker.
You can buy extra nozzles if you have fiddly, time-dependent jobs for the resin.
Unclip the gutter off temporarily in situations like that and let water run off the roof. You'll still be wet but not drenched😂
That is a standing rule here in the Pacific Northwest USA if you open the roof it will rain! 😓
Glad to hear it's not just enforced in this country! Thank you for watching, Kevin. Hope you're well mate.
@@Mr_A_Builders all good thanks! You as well
Great job Adam! Not sure why anyone would swap Sydney for the UK though! Have you got those Oasis thickets sorted yet? BTW glad to see you like the new channel banner. 🙂
Pete! Are you the ace fella who did the banner for us? Thank you so much if so and sorry that I didn't get round to replying, it was on my list, honest! Also thank you for the logo, we've used that too. No Oasis tickets yet I'm afraid but being that you're a dab hand on the old computer if you could knock us two up that'll do be ace! Thanks again, mate.
@@Mr_A_Builders Yep that was me, glad you like it! No worries on not replying, I know you guys are super busy. No can do on the Oasis tickets I'm afraid though - firstly I'm not that good, and secondly I don't want Liam & Noel coming round to smash the place up! 😁
@@PeteH.90 Calling Oasis 'thickets' will probably get your place smashed up. 😅
§§§§§❤❤❤ If you read the KemFix instructions on the back is states “Peel back label where instructed and with a UV light shine over blue tubing” ….we did this and to our amazement is various instructions and timings in depth and set times. It was done like this as it’s used in various environments and the UV shows up in day or night and can’t be rubbed off by rain or solvents. §§§§§❤️❤️❤️
Hi Adam, how long does it take your labourer to get to work ,or does he go home at weekends 😂
Put it this way. Keith, he's been late twice this week and used the BA self check-in app as the excuse!
13:37, I really wouldn't be happy with anything less than chipping off the old compo and properly ree bedding the two loose bricks. It would obviously delay things by a day or two for setting, but at least the job would be done right.
The job is progressing well nonetheless.
Hello Paul, hope you're well. Why?
@Mr_A_Builders I'm good thanks, as for why, because it's the only proper way and no risk of the pointing cracking.
Hi Mr a builder well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
You have by far the best sign off to a comment I have ever seen! Hope you're well mate. Take care.
Manscaped!!!! What a load of bollox 😂😂😂😂
Haha! Too right! Well... actually one right and one left all being well but you know what I mean! Nice one, Chris! All the best, mate.
Smooth bollocks mind you......
@sylvinolieno5361 mate they're like the Mitchell brothers!
Ads!!! On the resin tube there's a bit just before where you peeled that you're sposed to peel. Difficult if you have gloves on, or like me, no fingernails 😂
Haha! No way???!!! Seriously???!!! So that settles that then, it IS me and I AM the idiot! I will be fact checking that in the morning and reporting back! I hope you're right though, that would be amazing!!! Cheers man!
@@Mr_A_Builders Great step forwards. The label is like those on joints of meat in the supermarket with cooking instructions. Mostly about as useless as the ones on the tube will be!
@jonthomson1996 haha! Nice one Jon! Hope you're well mate and having a nice evening.
Be nice to see you working and not just talking zzz
There's not a lot to show mate, it was one of those tasks. If you want to see me drill a hole then...well...that's just a bit weird...
Why are you working in skin tight jeans?? come get the sponsors like snickers on board with ya.
I do like you very much but as with 95% of builders you are a hugely tallented little boy who hasn't grown up and is so nice you get walked all over! You have to understand once you have to a contract and once you start, the building site is YOURS. Nobody including the client can come onto the site without your permission or approval!... If a client (stop calling them customers because they are not!) if a client wanders on site and starts telling you what to do you very politely asking him to leave and let you get on withthe job. I watched your video ten months ago wshere you allowed yourself to be fired and felt very unhappy for you. You need to get tougher and be procedural. Stop being so informal! Its getting you into trouble!
First and foremost Gareth, thank you very much for watching our videos and commenting. That being said I've got to ask...what on Earth are you babbling on about???
Your lack of safety is a serious concern
Who to?
🤣 I’m guessing you’re not from the background of getting things done when needed?
Time served in this game gives you a sixth sense when something is pushing it too far. I think it’s a case of the only way sometimes, may not be pretty but it’s effective.
Well said mate. Couldn't agree more.
Thanks
Roy that's brilliant mate, thank you!
Thanks
Thank you! That's great, thank you so much.