Brother, I've been trying to make it work with AC for the last 6 months since I've got the SF1000 and finally found some great help. worked like a charm. Thanks a lot for taking the time.
I have just set up this wheel and really like AC so this video is a fantastic find for me. Thanks for sorting out how to do it and for sharing it. I was so impressed I have subscribed. Thanks again and my very best wishes Brian aka g0rlbm.
Thank you for this video, the setup process is a little finicky but now it works flawlessly. Without this video I wouldn't have been able to set it up.
Hi I've just got sf1000 and followed your tutorial and I'm getting data on my wheel but I'm facing a huge data delay and lagging like tev leds just show from time to time in random values and its not in real time ... any clue what could be the issue Thanks in advance Great Video!
failed to create the directory C:\Users\RafaUsing 127.0.0.1:9995 i get this in terminal when i open runWinAC, so because of that i dont see my ip etc... which i need to matchup - so i cant do next steps what to do?
how do you showed the UDP menu in the wheel? Cause I don't have it T818 and SF1000 both up to date with firmware Forget it, how did you make it working? thanks
@@brainnotfound239 hello, i fixed my problem (i just used an other wifi because there was a proxy in this wifi that block UDP data transfer) maybe you can try to allow communication in all udp ports to your firewall
hi bro' in my case it starts working but everytime i cross the line for the next lap the screen freezes and the only way to fix it is reconnecting the steering wheel. i mean, in practice for example, once i finish the outlap, screen freezes for 2-3 seconds and then goes into stand by mode, but i need to restart the wheel everytime for it to work again. i mean its gotta be something about the lap time logging, when the chrono restarts. think you could figure it out? in ACC, F1 21 and AMS2 in native mode works fine, i'll try the F1 in UDP mode now
I have a problem when i put all the information in and start the game it doesn’t show the data it only keeps showing the thrusmaster and Ferrari logo Can you help me
I had the same problem until I decided to screw it and fiddle with the program's settings. You'll need to check "Use UDP Broadcast mode (*)" and then it should work.
Hello! I did everything and when i go into AC, the wheel does turn on the telemetry screen but there is no feed.. when im stationary it says im going 120 kph at 600 rpm and its stuck at that
Yeah sadly that's one of the big issues of this method as it's not 100% working perfectly. Even with the latency very high in the Network settings there's still issues with it showing up immediately because of the wheel relaying with the game over your wifi. I would keep restarting the game until it works a little better, but sadly there's no fix for this as of yet. With more people getting the wheel I'm hoping that we'll see a mod soon that'll fix that.
thanks for this tuto/guide but can't get it to work either.. have latest firmware 5.51 also connected the wheel trough my phone. what mode r u using in the ac settings there are 3 modes i left it on the default one AC SharedMemory relay & UDP.. for the networks settings UDP 1 target Ip u enter the ip of the wheel found in the wheel wi-fi menu aswell as the the UDP target 1 ip's port it's the UDP number indicated there is this correct?
Hi, In the AC settings you want it to be "AC SharedMemory Relay Only" In that same menu you want the "AC UDP IP" and EVERYTHING underneath to be the same as what is in the command line that opens when you click "runWin_AC.bat" In the network settings under UDP Redirect & UDP 1 make sure that your data format is "F1 2020 format" and enter in your wheels IP below and press save and close. Remember you need to open the Telemtry tool before you start AC.
@@JoeyBonzo the fact is that in AC Settings int AC Broadcast data the AC UDP is correct but UDP port isn't (9996 instead of 9995) and cannot be changed... Also I don't get the "In the AC settings you want it to be "AC SharedMemory Relay Only" cause in the AC settings of the tool there isn't such a thing to select...
hello congratulations for your work! i installed the latest version of your tool from racedepartment but i have a problem with my wheel, i have too much delay on the display i have a latest generation router, the fastest connection that exists in my country and the maximum signal strength on mine sf1000 wheel. what could be the. cause?
Thanks for this video, i have a same problem, very good wifi but i start the race the delay on the display it's very latest... what could be the cause? thanks and best regards!!! :-)
S'il y a des noobs comme moi, d'abord faut connecter la roue au wifi du tel, de la accéder au wifi maison, de la prendre les données du volant (ip) puis seulement commencer a regler la télémétrie.
@@HeibyeYTB en gros faut aller dans ton tel, dans les wifi et te connecter a la roue, de la tu auras un genre de menu thrustmaster dans le navigateur et tu pourras faire le lien entre la roue et ta box wifi. Par contre moi je suis dans la mouise, j'ai réinstallé mon ordi et mnt le ip ne correspond plus a celui de la roue et plus moyen de deconnecter du wifi... vraiment incroyable ce niveau d'incompétence de la part de TM...
@@Nathan_hst Dans l'app telemetrie il y a la fréquence, je ne sais plus exactement le nom, en gros c'est la vitesse a la quelle les données sont maj/envoyé sur le volant. Plus elle est élevée plus vite tu reçois
1. Did you make sure the SF1000 is on the same network as everything else? Click on the wifi button I showed in the video and turn it on. If the number is 2X.X.XX.XXX you will have to connect to the Wheel (use your phone and connect to the wifi network titled Thurstmaster ~~~~) and from there you should be able to connect your wheel to your home wifi network. It needs to be on the same network as your computer or else it won't work. 2. Is your SF1000 up to date? It needs to be on Firmware v5.51 if it's not there'll be issues. To update your wheel you'll have to disconnect it from your base and remove the clutch pedals. Once those are removed connect the wheel via USB-C to your computer and update to version 5.51 via the Thurstmaster Firmware Updater
@@adriansorianoancio3257 So when you are on the select UDP it doesn't allow you to change it to F1 2019/2020? I would contact the Thurstmaster customer support in that regards because it shouldn't be doing that.
@@JoeyBonzo me salen las dos opciones que pone udp offf y luego lo de f1 me deja seleccionar las dos pero en udp no se pone en ningún momento en on me he bajado el programa de telemetría he abierto el puerto udp 20777 y al iniciar asseto corsa no hace nada no me muestra ningún dato la pantalla no se que tengo que hacer ya he probado un montón de cosas me podrías pasar un manual o hacer un video
@@adriansorianoancio3257 Please make a video of you following the instructions and I will let you know what you've done right or wrong. If you put the UDP option to F1 2020/2021 and follow the instructions in the description it should work.
Brother, I've been trying to make it work with AC for the last 6 months since I've got the SF1000 and finally found some great help. worked like a charm. Thanks a lot for taking the time.
AMAZING 😃👍 would never have got the steering wheel display working without your video, much appreciated, subscribed as a thank you
I have just set up this wheel and really like AC so this video is a fantastic find for me. Thanks for sorting out how to do it and for sharing it. I was so impressed I have subscribed. Thanks again and my very best wishes Brian aka g0rlbm.
Thank you for this video, the setup process is a little finicky but now it works flawlessly. Without this video I wouldn't have been able to set it up.
Yeah, the process is not ideal but it works! I'm hoping that when there's another better solution I'll be able to put a video out for that as well!
hi, how did you managed to make it working? thnaks
it doesnt work for me.. tried many times and followed all instructions. No display on the SF1000 with AC :(
@Joey Bonzo Is it possible to do something similar for Project Cars 2?
Hi I've just got sf1000 and followed your tutorial and I'm getting data on my wheel but I'm facing a huge data delay and lagging like tev leds just show from time to time in random values and its not in real time ... any clue what could be the issue
Thanks in advance
Great Video!
Thanks man! Best description on UA-cam!
failed to create the directory C:\Users\RafaUsing 127.0.0.1:9995 i get this in terminal when i open runWinAC, so because of that i dont see my ip etc... which i need to matchup - so i cant do next steps what to do?
Awesome...worked perfect. A little complicated, but if you follow the directions exactly it's done.
how do you showed the UDP menu in the wheel? Cause I don't have it T818 and SF1000 both up to date with firmware
Forget it, how did you make it working? thanks
HELP, I UPDATED MY FIRMWARE AND THE UDP OPTION (with the car logo) DISAPPEARED! WHAT CAN I DO?
That option was removed in update.
Heyy I Tried your tutorial for using my SF1000 in AC. the telemetry works but the SF1000 screen stay on the ferrari logo. Could u help me?
I have the same problem. It works in Competizione, but not in AC
I have the same problem. Have you connected it to your Wifi? What is your Driver Version?
@@brainnotfound239 hello, i fixed my problem (i just used an other wifi because there was a proxy in this wifi that block UDP data transfer) maybe you can try to allow communication in all udp ports to your firewall
hi bro' in my case it starts working but everytime i cross the line for the next lap the screen freezes and the only way to fix it is reconnecting the steering wheel. i mean, in practice for example, once i finish the outlap, screen freezes for 2-3 seconds and then goes into stand by mode, but i need to restart the wheel everytime for it to work again.
i mean its gotta be something about the lap time logging, when the chrono restarts. think you could figure it out? in ACC, F1 21 and AMS2 in native mode works fine, i'll try the F1 in UDP mode now
The download link you've provided doesn't have AC.bat only ACC.bat. It looks as though the dev has got rid of this now
its avaiable with rfactor2?
Im unable to get this working. I set up wheel and then connected to home network after I had set up telemetry
I have a problem when i put all the information in and start the game it doesn’t show the data it only keeps showing the thrusmaster and Ferrari logo Can you help me
So does mine, did you fix it?
No sadly not
I did everything in the vid, but it still doenst work for me, any tips?
same here
I had the same problem until I decided to screw it and fiddle with the program's settings. You'll need to check "Use UDP Broadcast mode (*)" and then it should work.
This actually helps! Thank you :)
@@eldrax78 thank you very much 😁👍
sadly doesnt work for me. followed every step but it wont work.
hey did you find a solution? thanks!
Is this possible to have the telemetry on the wheel on ACC on Xbox series x ?
Hello, Im having problems with the telemetry set up on my Xbox, If you can help me with that, Im willing to pay you for a class. let me know, thanks!!
I had a problem with the relay program It says that some DLL files are mising
Hello! I did everything and when i go into AC, the wheel does turn on the telemetry screen but there is no feed.. when im stationary it says im going 120 kph at 600 rpm and its stuck at that
Yeah sadly that's one of the big issues of this method as it's not 100% working perfectly. Even with the latency very high in the Network settings there's still issues with it showing up immediately because of the wheel relaying with the game over your wifi.
I would keep restarting the game until it works a little better, but sadly there's no fix for this as of yet.
With more people getting the wheel I'm hoping that we'll see a mod soon that'll fix that.
thanks for this tuto/guide but can't get it to work either.. have latest firmware 5.51 also connected the wheel trough my phone. what mode r u using in the ac settings there are 3 modes i left it on the default one AC SharedMemory relay & UDP.. for the networks settings UDP 1 target Ip u enter the ip of the wheel found in the wheel wi-fi menu aswell as the the UDP target 1 ip's port it's the UDP number indicated there is this correct?
Hi,
In the AC settings you want it to be "AC SharedMemory Relay Only"
In that same menu you want the "AC UDP IP" and EVERYTHING underneath to be the same as what is in the command line that opens when you click "runWin_AC.bat"
In the network settings under UDP Redirect & UDP 1 make sure that your data format is "F1 2020 format" and enter in your wheels IP below and press save and close.
Remember you need to open the Telemtry tool before you start AC.
@@JoeyBonzo the fact is that in AC Settings int AC Broadcast data the AC UDP is correct but UDP port isn't (9996 instead of 9995) and cannot be changed...
Also I don't get the "In the AC settings you want it to be "AC SharedMemory Relay Only" cause in the AC settings of the tool there isn't such a thing to select...
I thought ACC had official support for this wheel. They have a short teaser video?
Edit: ah this is not competizione.
My home´s wifi isn’t saved. Anyone has this problem ?
hello congratulations for your work! i installed the latest version of your tool from racedepartment but i have a problem with my wheel, i have too much delay on the display i have a latest generation router, the fastest connection that exists in my country and the maximum signal strength on mine sf1000 wheel. what could be the. cause?
Thanks for this video, i have a same problem, very good wifi but i start the race the delay on the display it's very latest... what could be the cause? thanks and best regards!!! :-)
Thanks for the guide - great job.
Thank you! It works🏁
doesn't run, says "windows cannot find the file"
For some reason I get this error when I try to open runWin_AC.bat can someone help please
Does anyone know how to setup SF1000 on the Xbox ?
Thanks man, got mine setup thanks to you but ers is not working on the telemetry it seems. Is it only me?
it does not work anymore right?
nope
Does this work on xbox?
Thanks for sharing eh Bud :)
Anyone do worked in rf2 and AC? Here don´t works.
work for ps5 or only pc?
It works for PS5 automatically theres nothing to setup you just have to plug it in and it works
Can I put a video on the screen
Please tell me this works with console version of AC.
No.
S'il y a des noobs comme moi, d'abord faut connecter la roue au wifi du tel, de la accéder au wifi maison, de la prendre les données du volant (ip) puis seulement commencer a regler la télémétrie.
j'ai toujour pas compris mdr
@@HeibyeYTB en gros faut aller dans ton tel, dans les wifi et te connecter a la roue, de la tu auras un genre de menu thrustmaster dans le navigateur et tu pourras faire le lien entre la roue et ta box wifi.
Par contre moi je suis dans la mouise, j'ai réinstallé mon ordi et mnt le ip ne correspond plus a celui de la roue et plus moyen de deconnecter du wifi... vraiment incroyable ce niveau d'incompétence de la part de TM...
Moi y'a 5 seconds de retard je comprends pas
@@Nathan_hst Dans l'app telemetrie il y a la fréquence, je ne sais plus exactement le nom, en gros c'est la vitesse a la quelle les données sont maj/envoyé sur le volant. Plus elle est élevée plus vite tu reçois
@@Pauticon3 OK ok merci je vais voir
Does it work on ps4 too?
No. PC Only.
Works but u know how to send the live data of battery system and ERS data to the display?
Sadly we're super limited in what we can send over. Hopefully with updates to Content Manager we'll get options for that information
Thank u so much
not works man
gran ayuda pero no me funciona creo que tiene que ser algun tema de puertos
1. Did you make sure the SF1000 is on the same network as everything else?
Click on the wifi button I showed in the video and turn it on. If the number is 2X.X.XX.XXX you will have to connect to the Wheel (use your phone and connect to the wifi network titled Thurstmaster ~~~~) and from there you should be able to connect your wheel to your home wifi network. It needs to be on the same network as your computer or else it won't work.
2. Is your SF1000 up to date? It needs to be on Firmware v5.51 if it's not there'll be issues. To update your wheel you'll have to disconnect it from your base and remove the clutch pedals. Once those are removed connect the wheel via USB-C to your computer and update to version 5.51 via the Thurstmaster Firmware Updater
@@JoeyBonzo está todo actualizado pero en el volante lo de udp me sale en off y abajo me sale f1 realmente no se que hacer ya
@@adriansorianoancio3257 So when you are on the select UDP it doesn't allow you to change it to F1 2019/2020?
I would contact the Thurstmaster customer support in that regards because it shouldn't be doing that.
@@JoeyBonzo me salen las dos opciones que pone udp offf y luego lo de f1 me deja seleccionar las dos pero en udp no se pone en ningún momento en on me he bajado el programa de telemetría he abierto el puerto udp 20777 y al iniciar asseto corsa no hace nada no me muestra ningún dato la pantalla no se que tengo que hacer ya he probado un montón de cosas me podrías pasar un manual o hacer un video
@@adriansorianoancio3257 Please make a video of you following the instructions and I will let you know what you've done right or wrong. If you put the UDP option to F1 2020/2021 and follow the instructions in the description it should work.
doesnt work
not even remotely working.
Work for Ps5?
No.