Thank you for such informative video. I've been painting our traditional pottery from Bolesławiec for almost three years now and I want to start my own small business. Your videos help me a lot!
@@MaeCeramics oh, I somehow missed this one.. i think it went well (Thank u for asking❤️) - some of the pieces turned out nice and others, not so much 🙈 I am using Botz atm, and each layer seems super important to get it ‘right’, but I would love to experiment making my own glaze. Can I ask if you can recommend any online shops to get supplies? And also how often do you make test tiles? And how do you test for ‘runny’ glazes? Thaaaaank uuu!
Excellent kiln loading videos…I’ve watched both! I’ve done lots of firing but still found this interesting. I’m sure all those new to firing their work would find them really helpful! Brilliant to mention checking the props before lifting the shelf off (I’ve had them sticking and dropping on to the ware below) - I’ve never heard ANYONE suggesting that! Your packing was very economical. One thing I thought you didn’t mention about spacing between glazed pieces (and the lid) was the fact that the ware actually expands slightly in the firing, is 1mm really enough? My 1/2 cm makes me a bit of a scaredy cat! Also I’ve always been told not to have anything overlapping the edge of the kiln shelves, but it didn’t seem to have an adverse effect. I shan’t worry about that any more! Thank you.
Omg the falling prop took out a pot once and I've still never recovered from the fear of it haha. Spacing wise - my glazes are pretty stable and don't run or bubble, so I can get away with a really tight pack. Give it a go packing tighter with a couple of pieces - you might find you don't need 1/2cm and can squeeze in a tiiiny bit more! I generally overlap over the edge of a shelf only a tiiiny bit, I always feel like it's naughty too but I've never had an issue!
Hi! Thank you for all the tips!! I was just wondering why you'd fire to cone8! Where I live is cone5-6 or cone 10. So the commercial glazes are more stable on that specific cones
Hi, I’ve attended your Domestika course so I was happy to chance upon your channel here. I’m a new hand builder and kiln user. I’ve just done 1 bisque and 1 glaze firing in a small Skutt kiln. I plan to make flat decor tiles and wall decor plates, use underglazes/coloured slip as colourants with a clear glaze on top. My question is about ways to prevent cracking of wares due to their flat base. I placed grog under a plate and some tiles but one still cracked slightly from the edge. I was glad to see your suggested method for stacking plates but my kiln shelves are only 13” so I won’t find smaller shelves. Do your plates stay intact due to their foot ring (and of course their evenness as they appear to be wheel made)?
My plates don't actually have footrings generally! Tiles are really susceptible to cracking, so I wouldn't blame yourself at all. Try stacking the bisqueware on the side, that may help. Good luck!
Hi! Great video ad always :) I have a question if possibile. I loaded a kiln and, when the firing has finished, I’ve noticed some color changes from the plates on the upper part from the lower part (same glaze and clay). The ones in the bottom look more dark and the others on the top are more light and balanced in color. Can you please help me finding a solution for that? I think it’s a distribution of the temperature problem. Thank you and cheers from Italy!! Claudia
Sounds like a heatwork issue - you can try adding a soak to your kiln so that the cooler areas of your kiln can catch up with the rest of it. You may want to check you elements too, incase they are getting old and need replacing.
Every time you glaze fire all the glaze on the piece melts so you can’t refire upside down. You can fire smaller pieces on stilts or put a foot ring on a plate, glaze the underneath but not the foot ring, but don’t use stilts on a plate or you will get warping. Hope this helps.
Great video but could you please remove the background music all together or at least lower the volume? it is very repetitive and hard to concentrate listening to that one while focusing on this great content. Many thanks.
Thanks for the feedback!! This one def is too loud on reflection. I now have a microphone and any background music is actually in the background. As this is one of my earlier vids, you might need to pop subtitles on and watch on mute I'm afraid! All the best
Again, I took a college course in ceramics, and I learn more on this channel. Thank you so much!
Thanks! Just did my second glaze fire and am watching vids to keep myself from opening it too early
That shot of inside the kiln when it was firing was cool!
Thank you for such informative video. I've been painting our traditional pottery from Bolesławiec for almost three years now and I want to start my own small business. Your videos help me a lot!
I love the “oh yeah”
Love this- so helpful and makes me feel a little less intimidated by the firing process!
This video was absolutely brilliant!!! Thank you so much for going into so much detail! The pieces were gorgeous too!
Very useful and well put together. An enjoyable watch 😊
That was sooo helpful. Thank you 😊
Loved this - thank you!! I will do my first ever glaze firing this week, and this was so helpful
how did your firing go?
@@MaeCeramics oh, I somehow missed this one.. i think it went well (Thank u for asking❤️) - some of the pieces turned out nice and others, not so much 🙈 I am using Botz atm, and each layer seems super important to get it ‘right’, but I would love to experiment making my own glaze. Can I ask if you can recommend any online shops to get supplies? And also how often do you make test tiles? And how do you test for ‘runny’ glazes? Thaaaaank uuu!
Very informative … nice job …I learned a few things today with this
Excellent kiln loading videos…I’ve watched both! I’ve done lots of firing but still found this interesting. I’m sure all those new to firing their work would find them really helpful! Brilliant to mention checking the props before lifting the shelf off (I’ve had them sticking and dropping on to the ware below) - I’ve never heard ANYONE suggesting that! Your packing was very economical. One thing I thought you didn’t mention about spacing between glazed pieces (and the lid) was the fact that the ware actually expands slightly in the firing, is 1mm really enough? My 1/2 cm makes me a bit of a scaredy cat!
Also I’ve always been told not to have anything overlapping the edge of the kiln shelves, but it didn’t seem to have an adverse effect. I shan’t worry about that any more! Thank you.
Omg the falling prop took out a pot once and I've still never recovered from the fear of it haha.
Spacing wise - my glazes are pretty stable and don't run or bubble, so I can get away with a really tight pack. Give it a go packing tighter with a couple of pieces - you might find you don't need 1/2cm and can squeeze in a tiiiny bit more!
I generally overlap over the edge of a shelf only a tiiiny bit, I always feel like it's naughty too but I've never had an issue!
Thanks for sharing the process and makes that (my) first firing coming up a wee bit less intimidating! 😁
Awesome video. Thanks for sharing. What kind of controller were you using? It looks so simple🥰
Thank you, this was super helpful. Can I please ask why you said terracotta is gonna melt? Just got my first kiln and I'm trying not to ruin it
Hi! Thank you for all the tips!! I was just wondering why you'd fire to cone8! Where I live is cone5-6 or cone 10. So the commercial glazes are more stable on that specific cones
This was a freakin great video! Thank you so much 🤗
would love to to come 1 or 2 days to learn how to glaze with you or how to mixed glaze
Super helpful ❤
Hi, I’ve attended your Domestika course so I was happy to chance upon your channel here. I’m a new hand builder and kiln user. I’ve just done 1 bisque and 1 glaze firing in a small Skutt kiln. I plan to make flat decor tiles and wall decor plates, use underglazes/coloured slip as colourants with a clear glaze on top. My question is about ways to prevent cracking of wares due to their flat base. I placed grog under a plate and some tiles but one still cracked slightly from the edge. I was glad to see your suggested method for stacking plates but my kiln shelves are only 13” so I won’t find smaller shelves. Do your plates stay intact due to their foot ring (and of course their evenness as they appear to be wheel made)?
My plates don't actually have footrings generally! Tiles are really susceptible to cracking, so I wouldn't blame yourself at all. Try stacking the bisqueware on the side, that may help. Good luck!
Super mam... how much cost that burning mitchine please
Hi! Great video ad always :)
I have a question if possibile. I loaded a kiln and, when the firing has finished, I’ve noticed some color changes from the plates on the upper part from the lower part (same glaze and clay). The ones in the bottom look more dark and the others on the top are more light and balanced in color. Can you please help me finding a solution for that? I think it’s a distribution of the temperature problem.
Thank you and cheers from Italy!!
Claudia
Sounds like a heatwork issue - you can try adding a soak to your kiln so that the cooler areas of your kiln can catch up with the rest of it. You may want to check you elements too, incase they are getting old and need replacing.
So is it not possible to glaze the bottom? Or could you do a 2nd round upside down? Or would that make the glaze at the top melt again?
Every time you glaze fire all the glaze on the piece melts so you can’t refire upside down. You can fire smaller pieces on stilts or put a foot ring on a plate, glaze the underneath but not the foot ring, but don’t use stilts on a plate or you will get warping. Hope this helps.
I like your music but it's a bit loud and making it hard to hear your voice. That said, I really like your tutorial.
What pink is that? ❤
I love u💖💖💋
Great video but could you please remove the background music all together or at least lower the volume? it is very repetitive and hard to concentrate listening to that one while focusing on this great content. Many thanks.
Thanks for the feedback!! This one def is too loud on reflection. I now have a microphone and any background music is actually in the background. As this is one of my earlier vids, you might need to pop subtitles on and watch on mute I'm afraid! All the best
Awesome info Thank you!