Have found 6oz. in the foam bottle is plenty...I generally use this stuff for strip wash and recons. 2 steps - foam gun with rinse and a follow up hand wash with no more than 4-6 oz in a 2 gallon bucket. For me anyways that combo gets the jobs done on a consistent basis. Squeaky clean and ready for prep. Foaming in the sun I find to be tough even if you rinse the vehicle down with cool water once you've foamed ya wanna let the soap set just a bit to lift the dirt but the sun starts drying right away. I found that can make the rinse just that more difficult- AND you have to hurry...which kinda sorta defeats the purpose. Good vid man!
Audie thanks for sharing 👍I always appreciate feedback. I would give the foam another try but recently sold my pressure washer... I'm ALWAYS trying and selling stuff🤯.... LOL ! Have a good one and thanks again!
For strip wash, use Down. More stripping effect and cheaper. Once your car is clean and waxed don't use Dawn anymore but rather a soap that will keep your wax on. I like Mr Pink in my foam canon.
Good video. As far as getting the soap out of the crevice you mentioned I look at like this . Go in your house and fill your sink with water. Put some dish soap in it and turn on the faucet. Not alot of suds . Now turn on your sprayer in it . Lots of suds . Run the hose down the crevice without any pressure or nozzle.
I'll keep that in mind. Thanks so much for the tip. I know straight was waaaay to much waste🤯. I do like the soap though, solid! Thanks for watching and for the help👍
LOL !! Man I tell ya, those fields make it tough to keep clean rides....😳🤬... there are roughly 40 acres of dirt field around my block... 🤯... hey ,thanks for watching and for offering that comment/question. 🤣🤣🤣
Lol.. yes it was. The directions say to use straight in foam guns so I tried it... waaaaay too much product but it definitely cleaned good! Thanks for the input and thank You for watching!!... oh and yes... zip wax was my FAV for years!!!👍
I believe the correct ratio for pressure washer is 1/1 in the bottle. That’s 1 part soap per 1 part water, not full strength. The confusing thing for me is that with all the water that’s used with a pressure washer wouldn’t the actual concentration of soap to water on the vehicle be very diluted compared to the ratio of the bottle?
Hey there. I could have sworn I read to put it into a foam cannon straight. Either way it's super affordable and effective. Mixing 1:1 would work great as well. No wrong answer here. As far as dilution, Foam cannons dilute between 4:1 to 10:1 automatically upon foaming I believe....🤷♂️. That's a tough one..Hope that helps. Enjoy!
@@detailit Oh Oh, my bad. You’re right. 😱 I went out to my garage and checked my jug. After saying 1/1 it also says “for maximum foam and cleaning use full strength.” I won’t be using that much though since the low cost advantage would disappear.
Nice video… what extension hose are you using? That looks much longer than standard. I recently purchased a highly rated aftermarket that also isn’t suppose to kink… not getting a good enough seal at the connections. 🤬
Wow someone finally saw the instructions to run it straight or 1:1 ratio for foam sprayer/devices. Idk how many videos i seen where people use 9oz at the most in their foam cannon. They also never mention the 3, 6 and 9oz instructions are for a SINGLE gallon of water. Even at 1:1 ratio in a 32oz container thats 16 oz of product which cost about 90 cents IF you get it at 4.88 plus tax which is about 5.30 here. This product is not a good value becuase of the amount of product you need.
Hey there! Yeah I was shocked when I read to use it straight. Pretty cool that it's an adjustable soap though. I like that part of it. Hey thank You for watching and Stay tuned for more reciews !!
Hey there. That very well may be the case! However, some cannons dilute up to 10:1. In terms of gallons, that would be one Gallon soap, ten gallons water. I'd like to see Turtle Waxes take on this. Valid point! Thank you for chiming in🤘. Thought-provoking atleast!
This is crappy soap. In a foam cannon, you would dilute at a ratio around 10:1 while that TW has to be used strait. So this means that soap is already diluted 10 parts to 1. You are buying around 6 ounces of soap and 58 ounces of water. 5$ for 6 ounces of soap ! Make it the other way... 5$ for 58 ounces of water. That is expensive water ! Make yourself a favor, buy Adam's or Chemical Guys' soap.
Hey Alain, how you doing? I liked this soap but honestly I prefer Image Platinum soap. It's a new company to me but I think their soap is priced right. Of course I have used Adam's, Meguiars, Shine Supply, Power Purple, krud Kutter, and Mirror Finish. Just about every soap works about the same honestly. If you have a specific brand you support , stick to it. If you are a detailer, I'd advise you buy VALUE. Low cost, great soap, VOLUME... Image Platinum, Meguiars Hyper soap, and Shine Supply Hot Shot come to mind. Btw, I have had some feedback on this TW soap. I used concentrate but that's not neccesarily the BEST way. Thanks for watching.I 👍
Have found 6oz. in the foam bottle is plenty...I generally use this stuff for strip wash and recons. 2 steps - foam gun with rinse and a follow up hand wash with no more than 4-6 oz in a 2 gallon bucket. For me anyways that combo gets the jobs done on a consistent basis. Squeaky clean and ready for prep. Foaming in the sun I find to be tough even if you rinse the vehicle down with cool water once you've foamed ya wanna let the soap set just a bit to lift the dirt but the sun starts drying right away. I found that can make the rinse just that more difficult- AND you have to hurry...which kinda sorta defeats the purpose. Good vid man!
Audie thanks for sharing 👍I always appreciate feedback. I would give the foam another try but recently sold my pressure washer... I'm ALWAYS trying and selling stuff🤯.... LOL ! Have a good one and thanks again!
@@detailit shine on you crazy diamond!
For strip wash, use Down. More stripping effect and cheaper.
Once your car is clean and waxed don't use Dawn anymore but rather a soap that will keep your wax on. I like Mr Pink in my foam canon.
This is like a snow foam, apc/ citrus and a tfr all in one product depending on the ratio, genius product
I really Like that stuff especially since its RETAIL.. good soap👍👍
To get the soap out of the body lines turn the gun so angle of the water meets the body lines... I do this for a living.@@detailit
Good video. As far as getting the soap out of the crevice you mentioned I look at like this . Go in your house and fill your sink with water. Put some dish soap in it and turn on the faucet. Not alot of suds . Now turn on your sprayer in it . Lots of suds . Run the hose down the crevice without any pressure or nozzle.
Hey Derrick, thank You for watching and thanks for the tip. I'll have to give it a try next week.👍Have a great week man!
I recently used the same soap on my channel. I diluted it in the foam cannon and bucket wash. 3oz each in both and it worked well.
I'll keep that in mind. Thanks so much for the tip. I know straight was waaaay to much waste🤯. I do like the soap though, solid! Thanks for watching and for the help👍
I would like to see a video that actually proves this product removes sealer/wax from an auto’s surface.
That's a good topic. I would guess it could and would take many wash/rinse cycles...
I used it to strip my old waxes. It works great
Yes it seems to be great for that.. I really like the versatility of this saop!!👍 I like it !
Why does it almost look like the movie Sandlot was filmed across the street from your house? Or is it just me...
LOL !! Man I tell ya, those fields make it tough to keep clean rides....😳🤬... there are roughly 40 acres of dirt field around my block... 🤯... hey ,thanks for watching and for offering that comment/question. 🤣🤣🤣
Id stick to using it for the hand washing, or add an ounce to a neutral snow foam to add some ph, but never as a foam itself.
Yeah sure. Any way u feel comfortable with it!
I use this to clean the vinyl siding on my house. Works great.
It really seems to be solid. I'm glad to hear some have used it for other than vehicles cleaning!👍 "Noted"... thanks for sharing!
Turtle wax zip wax was all I used for years. That was a lot of product used in your foam cannon.
Lol.. yes it was. The directions say to use straight in foam guns so I tried it... waaaaay too much product but it definitely cleaned good! Thanks for the input and thank You for watching!!... oh and yes... zip wax was my FAV for years!!!👍
Just picked up.a jug of this, can't wait to use it to decon the paint before clay bar. Great vid!
Roosters world, thanks or watching. I appreciate it. This is a solid soap. Hope you like it. ENJOY !!
I believe the correct ratio for pressure washer is 1/1 in the bottle. That’s 1 part soap per 1 part water, not full strength. The confusing thing for me is that with all the water that’s used with a pressure washer wouldn’t the actual concentration of soap to water on the vehicle be very diluted compared to the ratio of the bottle?
Hey there. I could have sworn I read to put it into a foam cannon straight. Either way it's super affordable and effective. Mixing 1:1 would work great as well. No wrong answer here. As far as dilution, Foam cannons dilute between 4:1 to 10:1 automatically upon foaming I believe....🤷♂️. That's a tough one..Hope that helps. Enjoy!
@@detailit Oh Oh, my bad. You’re right. 😱 I went out to my garage and checked my jug. After saying 1/1 it also says “for maximum foam and cleaning use full strength.” I won’t be using that much though since the low cost advantage would disappear.
@@baklash1762 hey no issue .. I think it's a good soap... you will Like it
Nice video… what extension hose are you using? That looks much longer than standard. I recently purchased a highly rated aftermarket that also isn’t suppose to kink… not getting a good enough seal at the connections. 🤬
That was a FLEXZILLA 50' hose... great hose. Amazon is where I bought it. Check Tractor Supply... they may have them..
I use this on my dog's hair, works like a charm!
Well, that's another Good use!
Never thought of it🤔
Awesome video and product review buddy. Looks like a winner 2 me.b well
Yer Awesome Richard... thanks for watching all my vids man. I appreciate you.👍
Stubby gun with a 40 degree nozzle. Maybe a wet coat or spray wax could help remove the sudz quicker
Hey I never thought of that! Thank You! Have a good 1
Wow someone finally saw the instructions to run it straight or 1:1 ratio for foam sprayer/devices. Idk how many videos i seen where people use 9oz at the most in their foam cannon. They also never mention the 3, 6 and 9oz instructions are for a SINGLE gallon of water.
Even at 1:1 ratio in a 32oz container thats 16 oz of product which cost about 90 cents IF you get it at 4.88 plus tax which is about 5.30 here. This product is not a good value becuase of the amount of product you need.
Hey there! Yeah I was shocked when I read to use it straight. Pretty cool that it's an adjustable soap though. I like that part of it. Hey thank You for watching and Stay tuned for more reciews !!
The reason soap stays in the crevices: Those crevices are designed to drain but the car needs to be on level ground.
Duuuude!! Awesome that makes sense... Thank You! So simple Yet so frustrating... I appreciate the tip. Love it!!👊🏼🙏🏼🤙
I wished they would start with a dirty car.
LOL.... that's a garage queen... doesnt get very dirty ....
The use of the electric power washer just gets a car wet with NOISE.
Yeah, my 3200 psi gas one in the past seemed to be a tad more effective. Just hate that noise!
@@detailit And that kind of pressure is Dangerous.
@@brianmchale6668 I have heard that before. Thank goodness I didnt have any issues with it.🤯....
Mr Pink is really a good foam cannon soap
Hey Manuel, I have heard that before. Thanks for stopping by. Take care!
what foam cannon is that
TriNova from Amazon website! Real good. Second one I have owned👍
To get soap from crevice take off nozzle from gun and rinse like that
Hey John, thanks for the tip. I'll give it a try. Thanks for watching
Not true i buy same it just troing like water dont lie
Not sure I understand your comment. Please restate it. Thank You
9 oz and above will strip wax, time to reapply
Hey there. That very well may be the case! However, some cannons dilute up to 10:1. In terms of gallons, that would be one Gallon soap, ten gallons water. I'd like to see Turtle Waxes take on this. Valid point! Thank you for chiming in🤘. Thought-provoking atleast!
This is crappy soap.
In a foam cannon, you would dilute at a ratio around 10:1 while that TW has to be used strait. So this means that soap is already diluted 10 parts to 1. You are buying around 6 ounces of soap and 58 ounces of water.
5$ for 6 ounces of soap !
Make it the other way...
5$ for 58 ounces of water. That is expensive water !
Make yourself a favor, buy Adam's or Chemical Guys' soap.
Hey Alain, how you doing? I liked this soap but honestly I prefer Image Platinum soap. It's a new company to me but I think their soap is priced right. Of course I have used Adam's, Meguiars, Shine Supply, Power Purple, krud Kutter, and Mirror Finish. Just about every soap works about the same honestly. If you have a specific brand you support , stick to it. If you are a detailer, I'd advise you buy VALUE. Low cost, great soap, VOLUME... Image Platinum, Meguiars Hyper soap, and Shine Supply Hot Shot come to mind. Btw, I have had some feedback on this TW soap. I used concentrate but that's not neccesarily the BEST way. Thanks for watching.I 👍