Making A Giant Bearing For My Power Hammer (Ft.
Вставка
- Опубліковано 13 бер 2023
- Use code WILLSTELTER50 to get 50% OFF your first Factor box at bit.ly/3JmwQbS!
Thanks Factor for sponsoring this episode.
Check Out @Abom79 for some great machining videos.
Thanks For Your Incredible machining help!
Stay tuned for more fun projects
Make sure to check out Patreon! You'll get your name in the credit roll of the video, and it's the best way to directly support us.
/ willstelter%e2%80%8b
The best place to follow along with the day to day updates in the shop is through my instagram @Will_Stelter ( / will_stelte. . )
My PO Box for if you have any cool old tools, maps, or blueprints you’d like to see hanging on the walls (please don’t send just anything) is:
Will Stelter
PO Box 514
Manhattan, MT, 59741
Editing by the talented @isaiaharnoldfilm
lastandfirstproductions.com
Website www.willstelterbladesmith.com - Розваги
Use code WILLSTELTER50 to get 50% OFF your first Factor box at bit.ly/3JmwQbS!
Thanks Factor for sponsoring this episode.
Why not switch to metric/smaller units when you start having to use "1/20000 inch" as the measurement? 1.27 micrometers (as example) is far easier to understand
Abom is cool : D Serious man! : D
Two of my very favorite people, Will Stelter and Adam Booth. Excellent!
You just know when Adam Booth gets involved, its going to be a 4 hour video incoming on his channel!
dude, your read my mind. I thought if he was doing this for himself it would at least four parts and the job could have been shown in one.
Stoked to watch it!
and what could of been a 5 minute vid :) Aboms awesome like that
Adam could do a one hour video breakdown of a drywall screw. But I’ve been a sub- ever since Scott @ Essential Craftsman highlighted Abomb79. Cheers.
He da bomb.
Are you kidding?? A collab between Will and Adam??? I'm in!
As you and Adam were saying, it's almost a shame you won't be able to see that work of art. But thinking about it, those clean, smooth surfaces will be improving the performance. So in a way, you'll be able to "feel" the beauty of Adam's work every time you use the power hammer.
I love that we get a look at a lot more than tossing iron into a firey furnace and then beating it with a hammer until it submits to your will. This level of detail as we look at classic machinery is a rare gift.
Nice! Everyone has been waiting for the cherry to be popped on the Pacemaker. The bearing came out perfect and it will be great to see your hammer back in service.
That's so cool that you worked with Adam on this project! I've been watching him for many years.
Can believe you survived the drive through St. Louis. That stretch of Highway 70 is one of the most dangerous in the country.
you can file the brass flush and then use a woodworking router to re-cut the radius on the brass
I'm glad you got it all the way in before it started to expand.
Factor meals are actually DELICIOUS. I don't usually comment about sponsors, but I used them when I was single, low carb, finishing university, and working full-time as an intern, and it was a life saver. Customer support was incredibly easy when needed, which was rare. They never skipped a beat during the pandemic. It was a great match for that time of my life, so check it out if it sounds like it could be for you too.
I have watched this dude for a couple years. Super Awesome work. Very talented
12:07 busted 😂. After all that Abom precision work... will drill it off centered hehehe
As a trained machinist, this was a treat. As a new blacksmith at 52 years old, I'll be beating hot steel until I die at the forge. Now I just need a lot of bronze to make a Gladius.
I have never done any machining work but I have watched so much Abom79 that I could probably work at a machine shop for a week before someone figured out I was never formally trained.
That "Ace Ventura" hair really suits you
Are we sure the hair wasn't Wolverine?
I remember when it was the coolest thing you could was rocking the ace Ventura hair style.
been waiting for this
You could use a woodrouter with a roundover bit to cut it flush
8:04 "....aaannnnnd.... Yathzee!" (Am I the only one who was expecting to hear this?) 😆
4:31
"We call this boring bar THE HOME WRECKER"
At 4:30 i can hear Curtis from CEE yelling "That's not a boring bar.....that's a boring bar" 😀
That surface finish alone speaks volumes... DAMN
Hard to find a Machinist with more experience than Adam. What a great collaboration between two of my favorite creators!
Just depends where and how long you look...
@@carlbukowsky1931 true that.
Sweet collaboration!
Will’s got the flock of seagulls’ look going on
I love Adam's new shop content. Haven't missed a single episode
That bronze singing made me very happy 😊
15:20 "MEASUREMENTING" -- New technical term 😂
I love the rifle on the tripod in the background during the Factor ad! Welcome to Montana!!
The scale of that lathe!!! Insane 🤯
Awesome to see ABOM! 🥳
That was totally rad AF! Very cool to see UA-camrs working together. Abom79 is amazing!
God bless you and I can't wait for more "content" from your channel. 😀
This is Awesome!! Some Abom!! Would love to see Abom come to your shop and make a tool or something for his shop.
Adam Booth he's our man if he can't do it no one can ....great job guys
Everybody loves Adam.
"Measurementing." Hah! What a hoot, Will.
You guys did it, got it done. Nobody does everything perfect. Get it!!!!
Before you file it, try making a wooden plug with a large head, then heat up the top of the casting and try hitting it into place using the plug to protect the bronze. Worth a try at least.
Nope, it has a death grip on it's home now. If you try to force it to move now, the bearing would be damaged. How much I'll leave to the millwrights in the crew, they are the best educated to respond.
Best wishes from the far North.
Depends. Old bearing was drenched in oil and took both heating and cooling plus massive amount of force to move due large surface area or bearing walls. If you go try to move it now, heat and cooling would be needed and even then bronze might change its shape due relatively small end surface area messing up everything and requiring to be reamed back in size. Depending on how much the difference is, its best to take millimeter or two off from casting rather than try to mess with the bearing. If its 5mm... well i would consider trying to redo it, but Will said its 0.762 mm under, so less than millimeter being taken out would not negatively effect the hammer, specially if the casting is bit uneven. In wills case its pretty straight, but smoothening that is not much of a issue and this should not effect rest of the hammers function at all.
@@Hellsong89 Line boring jobs are not cheap.
That lathe is beautiful , what an amazing machine. 👍
Love the video with Adam, @abom79. I ve follow Adam since years. Great to see he was able to help. Superb machinist and perfectionist. Very high level of care and perfect execution.
Amazing to see young people keeping this alive.
Looking forward to the "Extended cut" on Abom's channel. :)
One of these days, I'll have to do a show of my uncle's salt shaker. 3 pieces, temperature fitted bottom. beautiful piece. one of the most sentimental pieces i own.
I was there when he fitted the base into the shaker, using the heat/shrink thing.
Heck of a road trip hope you had fun with the drive
Wow! The size of that lathe is just mind-boggling! Very interesting to watch.
Did you try Keith Rucker? He is in Tifton Georgia and has an extensive shop. Incredibly nice guy as is Adam. Great job you are doing.
Tripod setup, very nice! 01:22
Are you going to be doing any collaboration videos with your friend in Sheridan? Sheridan is another beautiful town in the Midwest.
I LOVE seeing voolabs from channels I've been watching for years. Abom should do you right!
I love turning brass / bronze!
Ooooooooo damn Abom and Will yesssssssssss abom doing what he does you can't beat his craftsmanship
Ooh, Abom, spray welding? Dang, still cool to see how well that massive lathe can handle such a big part.
Love the new Caesar laurels hair stylin’. Great video!
It was cool seeing you and Adam working together, looked like ya'll had a great time
That bronze looks awesome against the black paint. Everything should have more bronze on it
Machining has to be the best ASMR material... I can watch lathes for hours. Adam's videos are always awesome.
You could get paid to watch lathes for hours.
This is the collaboration the internet needed
LOL Measurementing. Great word Will.
That is pretty cool. Glad to see you got to do a vid with Adam.
Even happier that the fit was dang near perfect considering you couldn't take the bore measurements with you.
Can you scooch it over just a smidge by pressing it back the other way?
Ohh Paul - once the two interference fit 3d surfaces are shrunk fitted with the vast temperature differential they can seldom be chilled/heated to a different location, or even removed one from the other depending on the fitment number ranges chosen. So in short no, and not as easy to re-position once the temps start to interface mechanically. MikeC
"Measurementing?"
Looks like Florida Man got to Will, too.
Lol at the varmint gun on a tripod as you take a bite for the promo
Will, that was an epic trip. Adam is indeed a top tier machinist. Good two see to masters of their craft having a good day.
That lathe is a monster! Cool video.
Abom79 and Will? Abom79 is a living legend! Thanks Will. Where there is a will...
I'd love to see the old bearings turned into knife guards or shield parts
It’s great seeing you two working together
Some serious Ace Ventura vibes from that haircut Will 👍
Interference fits that are put together with liquid nitrogen and heat always stress me out because I know the parts can get stuck before they're fully assembled. 😬 Super glad it all went smoothly!!!
You and Adam get along so well it’s nice to see personalities that mesh like that.
Measurementing. Gonna steal that.
Hopefully in a hundred years when someone goes to service that power hammer again and pulls it apart, they see the beautiful work done.
So glad you guys got together on this. Can't wait to go see Adams video now.
"It's not boring, it's actually quite interesting!"
Yeah yeah, this is a pun every machinist with a lathe NEVEREVER had heard in his life before... 😂😁😇🤟
Holy crap, the suspense when installing that bearing was intense for me. I was all, "shit! I would hate to see it get stuck, and they can't get it all the way before it warms up."
Yup. I think just about any man wood jump at the opportunity to keep a Boudry power hammer in service. I love how craftsmen tend to view themselves as custodians of old tools and want to keep them around for future generations. “I’m just keeping this in good working order for the next guy.” Really cool that You can go to other UA-camrs for the stuff you can’t handle in house. Hopefully Adam will have need of a blacksmith to preserve some other tools.
That thing spins pieces that way hundreds of pounds, effortlessly...
Crazy. Also, with that kid and of energy, if anything goes wrong, it reaaaaally goes wrong.
But man is it amazing to watch it operate
1:22 Nice telescope there!
Awesome video! Abom's great, and Will's the best, so this was a great collab.
In terms of matching that radius, could you put some abrasive on the radius of the shaft, and use that to create a match on the bearing?
OK, so there was a AR at about 1.25. On a tripod... hahaha classic
Thank you for bringing us along on your trip!
Awesome awesome awesome video! I have been waiting for you to do a collaboration with Adam! Now talk Alex into spending some time with Adam and then maybe my head won't hurt every time he machines something.
Love Power Hammers 😀
@Abom79 is magician 💪
Great see to see collaboration with Adam. I follow him and you and absoltutely enjoy the talents that you both share on UA-cam. Thanks and take care.
Man I never thought I'd see you guys together! Subscribed to you both and Adam's actually my favorite channel these days (sorry will) that bronze looks amazing, doesn't it? Absolutely beautiful! I love his work!
Always tighten big bolts to Abom torque! Only way to do it 😉
Abom? Next week Colin Furze will be riding the fly wheel like a ferris wheel.
so glad to see that american pacemaker put to work in Adam's shop. Sorry You had to drive all the way down to Mount Hannon to make it happen. LOL
Fantastic. Nice to see you and Adam working together.
I've watched Adam for many years, he knows his stuff. It's good to see him pass on his knowledge to you and others. By the way, that bearing looks so much bigger in your vid.
I got here from there , Great to see a collab with Adam, he's a great machinist ,
Heck of a drive!
Nice to see Abom on.
Great and fun video Will, I really enjoy your work and personality.
Who edits your videos?
Montana to Florida, nobody doubting your commitment if they were lol
I subscribe to both of you and cant think of a better machinist. Awesome.
That’s a damn good collaboration
Cannot wait to see this thing slam hot steel
1:23
are we just going to ignore the gun on the tripod in the background?
I jest, great content!
Yes. You saw nothing.