Great video but it doesn't mention the 4 screws, 2 on each side, that are under the dash connecting the console to the stereo amp bracket. I had to replace my heater core and used your videos to get the job done properly and was having a problem getting the console out, watched the video a couple times before finding the other 4 screws. Thanks for making these DIY videos. I've had my 90GT since 1989 and the heater core was OE and I had not pulled the dash apart before, your videos made the job much easier than I anticipated, still not a fun job but the videos made me confident I could handle it myself. Thanks !!
On the LMR website, this video is titled "How to remove 1979-93 mustang console". But the video is only for 87-93. I've noticed the earlier cars don't get much love.
How about a video on removing your dash to get to your heater core on your fox body. That would be pretty helpful. Just did mine, and for a $25.00 part seemed like a tough job.
So when I put together mine the center console in the back wouldn't fit its like the whole middle part was too far back. It was really hard to get the back screws in I had to screw them in at an angle. Any thoughts on what I did wrong?
I followed all instructions and when I pull back on the console, the top part will not budge. It seems as if its still stuck on something. What did I miss?
Why don't you guys sell the blue plastic variants, my interior is all blue plastics. You sell red, was blue so uncommon that its not profitable to offer the color?
I was hoping you could help me. I had to replace my center console on my 93 GT. My problem now is that I can't put my shifter bezel back on because the shifter is sitting too high. Is there a way to remedy this? I've been driving for a few years now with no shifter boot.
@@latemodelrestoration I see, though I made a mistake with the video, I just wanted the way to take the console cover off to install a cup holder cover on.
Great video but it doesn't mention the 4 screws, 2 on each side, that are under the dash connecting the console to the stereo amp bracket. I had to replace my heater core and used your videos to get the job done properly and was having a problem getting the console out, watched the video a couple times before finding the other 4 screws. Thanks for making these DIY videos. I've had my 90GT since 1989 and the heater core was OE and I had not pulled the dash apart before, your videos made the job much easier than I anticipated, still not a fun job but the videos made me confident I could handle it myself. Thanks !!
On the LMR website, this video is titled "How to remove 1979-93 mustang console". But the video is only for 87-93. I've noticed the earlier cars don't get much love.
No problem. Just glad the video could help your project!
So thankful to LMR for these Videos!
check out our Fox Body Windshield Wiper Install and Removal video. Enter " ifyMNjd8HN8 " into the search on youtube.
I am restoring a 89 5.0 and this helped out alot thanks guys
Tight these guys make the best vids. I cant wait until they show how to do a T5 swap.
is it possible to switch the location of the air conditioning controls and the stereo?
good info.I'm putting a c-4 in my 1990 lx and I need to do this for my shifter install
Patrick Huszarik Glad we could help!
How about a video on removing your dash to get to your heater core on your fox body. That would be pretty helpful. Just did mine, and for a $25.00 part seemed like a tough job.
do you have a screw kit for mounting the console
You Make It Look Eazy Bro...Thanks For The Vid...
You do? Well that's great! Should've looked into the website a little further, because that would have been nice to have.... Hahaha thanks a lot
great videos really helpfull keep them coming need lots of help on my 88 fox thanks
Wow,outstanding video! Great job LateModelRestoration
Do a video on dash pad replacement
Once again great tips! Thanks :)
I need to know how to install the hinge pins on my console armrest on my 88 fox GT.
So when I put together mine the center console in the back wouldn't fit its like the whole middle part was too far back. It was really hard to get the back screws in I had to screw them in at an angle. Any thoughts on what I did wrong?
Something may not have been fully seated somewhere else on the console. It's tough to say without seeing what's going on in person. -Landan
Awesome video thanks.
That black carpet looks good with that Titianium gray interior, I may put black carpet in mine
could someone help me out i wanna put a shift boot on my 87 gt automatic
more how to videos on these mustangs please.
Would this console fit in a 79 Mustang? I can't find the original console for the 79 anywhere and this console would be my last option
That is exactly the color of the car and trim on my mustang. but I dont know what what color grey that is!? is it smoke grey?
The interior color in this '92 Coupe is Titanium Gray. -Landan
I want to paint the grill I have but I don't know how to remove the wipers. Help! Lol
I followed all instructions and when I pull back on the console, the top part will not budge. It seems as if its still stuck on something. What did I miss?
Nvm I found it for anyone with the same problem:
www.mustangandfords.com/how-to/paint-body/mmfp-0911-fox-body-mustang-coupe-restoration/photo-12.html
Very helpful👍 Thanks Jmac & LMR!
How do you remove an aftermarket radio?
Can someone tell me where to get that arm rest piece?
Here is a link to our website: lmr.com/products/79-93-Mustang-Center-Console-Components
What about with an auto does the plastic around the shifter just pop out
This will pull up just the same as the 5-speed applications.
Why don't you guys sell the blue plastic variants, my interior is all blue plastics. You sell red, was blue so uncommon that its not profitable to offer the color?
I was hoping you could help me. I had to replace my center console on my 93 GT. My problem now is that I can't put my shifter bezel back on because the shifter is sitting too high. Is there a way to remedy this? I've been driving for a few years now with no shifter boot.
GIve us a call. I'm sure we can help you with your issue. Do you have an aftermarket shifter or non-factory transmission?
***** I have a Hurst shifter and a stock T5. Everything fit fine with my original console. I just accidently broke it.
Wish I would have known that.... I could have added some pics. Next time I hope not.
Where are you guys located, I really want my heater core replaced on my mustang lx 90.
We are located in Hewitt Texas. However, we do not provide mechanical work to the public. All of our videos are for the DIY'er. -Landan
do you guys sell wiring harnesses for the cigarette lightter
Please give our tech team a call at 866-507-3786.
Do you have to remove the seats?
Removing the seats is not necessary. We had ours removed to make the steps easier to see.
Do all these steps really need to be done?
Yes. -Landan
@@latemodelrestoration I see, though I made a mistake with the video, I just wanted the way to take the console cover off to install a cup holder cover on.
@@sto1asgoetia600 Then no, you don't have to do all of these steps. Instead, watch the video below. -Landan
ua-cam.com/video/ye93jYV4Mds/v-deo.html
Where can i buy a Fox Body mustang stock radio?
Shark Record Films I am not 100% sure on that one. Maybe try a local Craiglist, eBay, or forum. -Landan
*****
From ford. It's 800.00$
Brockton GuardianAngels can you give me a link to where its available to purchase?
+Shark Record Films wreckers might have some hanging around.
too much work............ its easier on the 94-98's
Great video.
Thanks.