Cutting Open Oil Filters To INSPECT
Вставка
- Опубліковано 21 сер 2024
- We cut open oil filters to inspect them in this video to check the health of the engine and look for any potential fragments in the oil
Here is the Oil filter cutting tool we used
amzn.to/2ZLJFnk
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com...
👇 *SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX* 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint (937) 262-7452
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#DIY #Garage #Wrench #ManCave #Honda #Dodge #SRT #Performance #Carproject #Truckproject #Salvage
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Here is the Oil filter cutting tool we used
amzn.to/2ZLJFnk
I had a customer in the pass that would send his oil samples to a lab. They check out and send you a report. Good job on cutting the filters. 👍
Awesome Jon《☆》Great idea🤓👍🏾You will find most of the metal particles get trapped in the pleats of the paper. Aircraft mechanics cut the paper off with a knife or case cutter & unfold it like an accordion. Oil analasis is a big business :*: Greetings from⛾Florida🤳my friend🤓🗣🔊☮✌👍🏾
Great idea John! So interesting to watch you do that. I guess it would give you a heads up on any problems before you get left stranded. Thanks for another great video
Thanks BoostMobile! I was looking for this! Really!😁😃
Oh and also you can place a magnet on the bottom of the oil filter case so if there is any cast iron or steel it will get held by the magnet instead of punching a hole in the media and go through the pump and oil passages...alot of drag racers do it .....I do it also just because I have the magnet and can only help not hurt👍
Both of those filters still look really clean.
Yeah they look pretty good to me! It’s s bit nerve racking opening them up still though and seeing a flake or two but that’s what the filters are for and why we change them every time with the oil. 💪
You can also send out oil for analysis engine,trans,axel.tell you the health of components we do it with our hydrolic oil in our excavators,dozers, loaders, you burn up a pump on some of these things and it can cost big money like the bearing in our cone crusher just the bearing and race was $10,000 not including labor,oil,seals,hardwear and dry ice 400 lbs of that to shrink the race to get into the housing....was a huge job but got it done.
FYI if that Honda filter is an A02 it's made by Fram anyway. If it is an A01, it is made by Filtech/Roki.
Very informative thank you.
@BoostedMotorsports First of all, thank you for the video, I tried the link to the Filter Cutter, the link did not work, can you add the brand and description of the Filter Cutter so that we might find it. I like the design that uses the threaded opening to locate the filter in the cutter, it seems it would require less force to rotate the cutter, meaning that the process could be completed without putting the filter in a vise as with many of the others. Thank you in advance for considering my request.
I'd never touch a Fram filter.
Wow the viper element looked so much better
Awesome bro. How did the filters look in both of your vehicles?
Viper was clean! S2k has a bit more but nothing alarming!
@@BoostedMotorsports that's awesome. Do you have more plans for the Viper powered Ram?
Wonder if you could use a strong magnet to fish out any hidden metal fragments from the filter media.
I put the filter off my srt 10 ram in a vise and turned the cutter. Alot less mess
Fram gives me chills. Lol
ITS FINEEE
@@BoostedMotorsports what that? It's fiiinee
When's the muffler video, I REALLY want to know how it sounds sense I have access to those mufflers and I'm about to do a 5.9 swap
I should have that done this week
@@BoostedMotorsports 😩😩 but I'm soooooo impatient lol can't wait to hear it.
Me too trust me! The drone right now is brutal
@@BoostedMotorsports I understand that bro, I'm running an Off-road X-pipe on my 3.9 with two Flowmaster Super-10s and the drone was deafening. I threw two resonators and it cleared up alot but still a lil drone. If those mufflers sound good, I wanna throw em on the 3.9 before I do the 5.9 swap just to see how it is.
use a razor and cut the top and bottom of the filter media so you can spread it out. Any particles are going to be trapped down in the pleats of the filter media.
Lol I see that Lexol leather conditioner bottle. I just used that on my heep. They used to have it in a spray bottle, god what a bad idea that was!
Lmao that stuff is garbage I’m actually going to return it. Glad I tested it on the crappy s2000 seats first cause it left white stains all over the seat 🤦♂️🤦♂️🤦♂️
@@BoostedMotorsports Oh no!
Nothing to see there. That's comforting.
Well that link does not work any more.....nice