Matt, thank you so so much. After buying my first Wittern 3589 new, this video gave me the confidence to buy my next one used and install the Nayax Reader myself. Took about 2 hours for me to do it by following along and stopping video as needed. Very good step by step video.
Thank you! Yes I usually mount them internally and it doesn't really matter where... However sometimes when you get it to your location the cellular service may not be very strong. If that is the case, you may need to route the wire to the outside of the machine to catch a better signal
Thanks for the vid. Silly question. I'm trying to make sense of all the machine brands and models. From what I can tell, the Wittern Futura is now the Selectivend 29, but I've not seen one in the finish shown in this video. Are there various exterior finishes available? Thanks!
Thanks so much for this video! I just got my 1st machine and I've been stuck on how to remove the coin section. UA-cam University has cone through again😊!
Hi Matt, Great Videos!! I have a quick question, do I need to setup the product prices on both the vending machine and on the nayax reader? I am seeing conflicting info online about this. Some people say you set the prices on the vending machine only and they will be captured on the Nayax once purchases are made and others say you need to set the prices on the vending machine as well as the nayax reader in the product map. Thanks Rob
What size bolts did you end up using or what size driver did you use to screw it in? My machine was second hand but didn't come with them either. And I have the same drill what kinda Phillips driver did you buy?
My apologies as I just used whatever was on the machine... I don't recall off hand what socket it was. As far as the phillips driver just whatever was on the rack at home depot!
Does the machine have to be off when you install the card reader the only reason why I ask is because I have a location where I am installing but I didn’t know how to do it so I bought myself time to install it next week but in the meantime, do some questions I need to ask And the first one would be does the machine have to be off when installing
Yes! Some machines don't have a designated space for them though. In that case you'll need to drill holes and mount somewhere on the front of the machine
So I just bought one of these machines with a card reader but the card reader is still attached to the old owners account. How do I switch that to my account?
I try to take out the bottom coin container, but for some reason it wouldn’t come out and I didn’t want to force it and break something so just ask is there a certain way?
@@GalaxyGames843 no I didn’t do that. I was trying to figure it out while I was there at the location but wasn’t too sure so I gave up and explained it. I will be back Tuesday so until then I was looking at videos on how to do it so when I go there, I’m able to just do it quickly and then be out because I feel like I’m losing money because who carries dollars or change anymore
So, I installed it into the same machine. However, it's lag time to actually make a transaction is quite a while. Only the tap pay currently works, not the slide or insert option. Is there a specific thing I have to do with the management system before payments can be accepted on the machine? I am struggling as this is my first machine and Nayax system.
@@GalaxyGames843 i wish you had a shop in NY where i can just bring on my entire machine lol! Thanks for the help will be using your channel as a guide 🙌🏼
NAYAX DONT WORK, change my prices, loose conection, i have to take off these devices from machines, the support is horrible, only phone support, bad attendance, change settings, they dont know how to fix! is a nightmare, all days on phone! it make me broke! IS THE WORST DEVICE!
Matt, thank you so so much. After buying my first Wittern 3589 new, this video gave me the confidence to buy my next one used and install the Nayax Reader myself. Took about 2 hours for me to do it by following along and stopping video as needed. Very good step by step video.
@@123hotdog111 glad the video was able to help you!
Glad to see the progress matt, all the best in 2023 🎄🎁🍾🕹️💵🧦🔥👍🏿🤙🏿
Thank you for all of your support!
Great video. I have a question on the antenna. Do you mount it internally and if so, does it matter where? Thank you.
Thank you! Yes I usually mount them internally and it doesn't really matter where... However sometimes when you get it to your location the cellular service may not be very strong. If that is the case, you may need to route the wire to the outside of the machine to catch a better signal
Thanks for the vid. Silly question. I'm trying to make sense of all the machine brands and models. From what I can tell, the Wittern Futura is now the Selectivend 29, but I've not seen one in the finish shown in this video. Are there various exterior finishes available? Thanks!
Thanks so much for this video! I just got my 1st machine and I've been stuck on how to remove the coin section. UA-cam University has cone through again😊!
Hi Matt, Great Videos!! I have a quick question, do I need to setup the product prices on both the vending machine and on the nayax reader? I am seeing conflicting info online about this. Some people say you set the prices on the vending machine only and they will be captured on the Nayax once purchases are made and others say you need to set the prices on the vending machine as well as the nayax reader in the product map. Thanks Rob
@@gamingboxervideogames just set the prices on the machine. When someone purchases each item, it will report the price to Nayax
@@GalaxyGames843 Awesome!! Thanks
What size bolts did you end up using or what size driver did you use to screw it in? My machine was second hand but didn't come with them either. And I have the same drill what kinda Phillips driver did you buy?
My apologies as I just used whatever was on the machine... I don't recall off hand what socket it was. As far as the phillips driver just whatever was on the rack at home depot!
thank you very much for this video. It is very very helpful. I hope I had watched this video earlier to use ur discount code!
Glad the video helped!
Very good video thank you much. Can’t wait for the mapping video
Look for it later this week!
Hey there, did you connect the Dex cable anywhere? I have a wittern 3589 and there is no input for it. Would appreciate your help
There is a dex harness you can purchase for the 3589 but honestly you don't really need it
@@GalaxyGames843 awesome. Thanks for the quick response! Wish you the best!
@@DavidJones-hk8uy thanks same to you!
Does the machine have to be off when you install the card reader the only reason why I ask is because I have a location where I am installing but I didn’t know how to do it so I bought myself time to install it next week but in the meantime, do some questions I need to ask And the first one would be does the machine have to be off when installing
I would advise to always power the machine off when connecting / disconnecting anything electrical
@@GalaxyGames843 got it
Are all of the card readers the same size regardless of the machine it will be used on?
Yes! Some machines don't have a designated space for them though. In that case you'll need to drill holes and mount somewhere on the front of the machine
So I just bought one of these machines with a card reader but the card reader is still attached to the old owners account. How do I switch that to my account?
@@oniINapolaroid most likely they will have to start a transfer. Unless they do, it will be useless to you
@@GalaxyGames843 thank you
When Creating a new machine on Nayax, What is the Machine Reference on the backend of Nayax referring to?
Nayax will create the new machine for you
I try to take out the bottom coin container, but for some reason it wouldn’t come out and I didn’t want to force it and break something so just ask is there a certain way?
Did you remove the screw at the bottom - I show it step by step in this video
@@GalaxyGames843 no I didn’t do that. I was trying to figure it out while I was there at the location but wasn’t too sure so I gave up and explained it. I will be back Tuesday so until then I was looking at videos on how to do it so when I go there, I’m able to just do it quickly and then be out because I feel like I’m losing money because who carries dollars or change anymore
grinder on plastic. you are a brave man. lol
Lol yes!
So, I installed it into the same machine. However, it's lag time to actually make a transaction is quite a while. Only the tap pay currently works, not the slide or insert option. Is there a specific thing I have to do with the management system before payments can be accepted on the machine? I am struggling as this is my first machine and Nayax system.
Should not be - if one works they should all work - i'd reach out to Nayax tech support and make sure they have all of your back end settings correct
Was a good 👍 today
Thank you!
@@GalaxyGames843 yea big likes
Can you install this reader on any machine ? Or are there requirements in order for it to function properly ? Thanks!
The machine would have to be MDB compatible for the reader to work
@@GalaxyGames843 i wish you had a shop in NY where i can just bring on my entire machine lol! Thanks for the help will be using your channel as a guide 🙌🏼
@@Alexndrv._ I wish too!
@@Alexndrv._ glad the channel could help!
Nicely Done
Thank you!
Super nice
Thanks!
Awesome!
Thanks!
I remember when you had one coke machine dam
Both the channel and the vending business have grown!
Do you know how to fix the cash only message in nayax screen?
That can happen for multiple reasons
What are the most common? 🤔
How do you fix it
Why dosent nyax offer a thinner mounting bracket?
They used to have a thinner one with the old VPOS models. Wonder if they still have one
@@GalaxyGames843 sorry, Nayax doesn't sell the thin metal backings anymore, not sure why or where else to get them.
NAYAX DONT WORK, change my prices, loose conection, i have to take off these devices from machines, the support is horrible, only phone support, bad attendance, change settings, they dont know how to fix! is a nightmare, all days on phone! it make me broke! IS THE WORST DEVICE!