I got thrown a couple of these to mount on some actuated valves today, this video has been helpful! Thank you! I primarily build VAC units, but this Siemens was a breeze, though it looks complicated lol. I had a little trouble since I am using a single action spring return, but think I figured it out now.
Excellent job! But what about the mechanical yellow rotatory selector at the left and the other one...the internal down/up mechanical switch at the center, please?
Very good explained, very well organized video. Have on question: What’s the difference between this ps2 and Bray 6a positioner? Their design and operation is almost the same, why?
Hello , I have a question ; Even though there is 4mA in operation card, in the screen of valve appears AUTO 100 . Is there a problem with the settings of the valve? So valve is bot taking action accreding to plc command.
Sir, in many cases we have encounterd problems as not completion of auto calibration nor error display, how to deal such problem? Is replacement only solution of it?
I have a question, on a Flowserve positioner I can just run a "find travel stops" and a Masoneialan SV2 I can also only run a travel stop. This can be very helpful at a time when we have to have the valve immediately. We use a lot of the PS2s where I work, is there a way to only run a find travel stop and skip the other steps ? If we are on a sloppy valve that is not scheduled to be rebuilt until an outage I could really use this function because the PS2s at times will not complete the calibration if there is slop? Any suggestions? Thank you for your help.
Hello SuperStang thanks for checking out the video. If you want to speak to one of our technicians please feel free to give us a call on 03 8727 7800 and we can talk you through the process or send an email to info@acrodyne.com.au
How to change the position reading on the positioner? Example the valve is 100% open and in the positioner it comes out at 0%. where gives me the option to change it?
Como cambiar la lectura de posición en el posicionador? Ejemplo la válvula está 100% abierta y en el posicionador me sale en 0%. dónde me da la opción para cambiarlo?
Hello Rizky, thanks for checking out the video. If you want to speak to one of our technicians please feel free to give us a call on 03 8727 7800 and we can talk you through the process and hopefully sort out your issue.
I got thrown a couple of these to mount on some actuated valves today, this video has been helpful! Thank you! I primarily build VAC units, but this Siemens was a breeze, though it looks complicated lol. I had a little trouble since I am using a single action spring return, but think I figured it out now.
Great video, I followed the instructions for a couple of PS2 positioners that have been giving us problems and now they work perfectly. Thanks!
Great news Myles, glad you enjoyed the video.
Very good. Nice slow pace
what happen when you doing calllibration, but it stuck at run 2 for long time.
This is so helpful, can you plz make some videos about using the HART protocol (?)
Excellent job!
But what about the mechanical yellow rotatory selector at the left and the other one...the internal down/up mechanical switch at the center, please?
Great service sir
Very good explained, very well organized video. Have on question:
What’s the difference between this ps2 and Bray 6a positioner? Their design and operation is almost the same, why?
Can we get Valve position feedback from any terminal to an analogy input card to plc.
I have been facing an error during Run 1 stage seimen sp2 positisoner, could u please share your comments on this issue.
How to found the error in the siparta PS2 possotioner
You are good best tutorial for positioner thumbs up for Siemens sipart and thumbs Down for. Becoz ABB tutorial tzidc
Hello , I have a question ;
Even though there is 4mA in operation card, in the screen of valve appears AUTO 100 . Is there a problem with the settings of the valve? So valve is bot taking action accreding to plc command.
I'm facing positioner hunting problem, could you help me..
Sir, in many cases we have encounterd problems as not completion of auto calibration nor error display, how to deal such problem? Is replacement only solution of it?
Well explained. Keep up
I have a question, on a Flowserve positioner I can just run a "find travel stops" and a Masoneialan SV2 I can also only run a travel stop. This can be very helpful at a time when we have to have the valve immediately. We use a lot of the PS2s where I work, is there a way to only run a find travel stop and skip the other steps ? If we are on a sloppy valve that is not scheduled to be rebuilt until an outage I could really use this function because the PS2s at times will not complete the calibration if there is slop? Any suggestions? Thank you for your help.
Hello SuperStang thanks for checking out the video. If you want to speak to one of our technicians please feel free to give us a call on 03 8727 7800 and we can talk you through the process or send an email to info@acrodyne.com.au
How to change the position reading on the positioner? Example the valve is 100% open and in the positioner it comes out at 0%. where gives me the option to change it?
in parameter 38.YDIR you can chanch it
Como cambiar la lectura de posición en el posicionador? Ejemplo la válvula está 100% abierta y en el posicionador me sale en 0%. dónde me da la opción para cambiarlo?
ตั้งเวลาและเพิ่มแรงดันยังไงครับ
Hello, i have trouble for my potitioner, the display, displayed p - - - , and have alarm fault
Hello Rizky, thanks for checking out the video. If you want to speak to one of our technicians please feel free to give us a call on 03 8727 7800 and we can talk you through the process and hopefully sort out your issue.
Want to open 100% in 19ma current what do????
nice presentation thanks a lot
How tu resetting
How to reset ps2 sir?
Thank you very much but could I have the video in French please thank you in advance
hi.thankyou
Ok
Very good
Hello
Since it read auto 20 when valve is fully shut so how to bring to auto 0 when valve is fully shut?