How to Replace Alternator 2013-2017 Honda Accord

Поділитися
Вставка
  • Опубліковано 6 лют 2025
  • Buy Now!
    New Alternator from 1AAuto.com trq.video/ib-1...
    This video shows you how to install a new alternator from TRQ on your 2013-2017 Honda Accord. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
    This repair was done on a 2013 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2013 Honda Accord
    2014 Honda Accord
    2015 Honda Accord
    2016 Honda Accord
    2017 Honda Accord
    Tools you will need:
    • 10mm Socket trq.video/objM...
    • 12mm Socket trq.video/obES...
    • 14mm Socket trq.video/obES...
    • Trim Tool Set trq.video/oahF...
    • 1/2 Inch Ratchet
    • 1/4 Inch Ratchet trq.video/objM...
    • 3/8 Inch Drive Ratchet trq.video/obES...
    • Torque Wrench trq.video/oaMG...
    • Gloves trq.video/oan7...
    • Safety Glasses
    Subscribe: / @trq
    Check out our playlist:
    Honda Accord 2013-17 9th Gen: • Honda Accord 2013-17 9...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 27

  • @TRQ
    @TRQ  Рік тому +4

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @prodigeemd
    @prodigeemd 11 днів тому

    I just replaced my alternator following these steps! Only issue I had was the part I got from O'Reilys was defect, the holes didn't line up for the top and bottom bolts. Just make sure it fits. Now putting everything back was a pain especially the bolt for the tensioner and putting back the belt. You might need someone to hold the tensioner while you put the belt back. After I was done everything was good! Thanks TRQ! I'm a pro now! LOL. P.S. If you have a "Check Charge System" displaying on your Accord make sure to check the battery, and alternator with a multimeter and battery sensor. My issue was the alternator. Message and Battery light is gone.

  • @TeacherofFaith-mt7jt
    @TeacherofFaith-mt7jt Рік тому +3

    Thank you, your videos have been such a helpful way to navigate and precisely deal with my Honda Accords problem

  • @mityashin
    @mityashin Місяць тому

    Probably the best on UA-cam

  • @TOWNERENTERPRISES
    @TOWNERENTERPRISES 8 місяців тому +5

    It was very helpful! thank you. I only wish I would I have known the exact list of tools and necessary before starting as well as some notes on the difficult parts. Thanks for your work!

  • @marquisgreen3628
    @marquisgreen3628 Рік тому +7

    Walked me through my first job at a mechanic shop, thanks

  • @nonenope6091
    @nonenope6091 2 місяці тому

    Best video for my 2015 Acura alternator repair thanks for the video

  • @davidjoaquin141
    @davidjoaquin141 4 місяці тому +1

    Nice job!! Waiting for the alternator and will change it out. Well done for sure!! Thanks!!

  • @ellangarcia5299
    @ellangarcia5299 3 місяці тому +1

    Thanks bro really appreciate you walking us through that! ✊🏽👊🏽

    • @TRQ
      @TRQ  3 місяці тому +1

      +@ellangarcia5299 Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @cris41300
    @cris41300 2 місяці тому +1

    I broke an Allen wrench trying to take off that tensioner 😅 it's worth it to get the 8mm hex socket for sure

  • @igotyabackhomeboy
    @igotyabackhomeboy 7 місяців тому +1

    Saved a life here. Thank you!

  • @nyshanaallen8324
    @nyshanaallen8324 4 місяці тому

    This was so detailed and helpful thank you so much for posting this video!

  • @DisabledTeamYT
    @DisabledTeamYT 9 місяців тому +4

    This is not the same as 3.5 v6 engine. Can you guys do a video on it? There’s zero videos on yt for a 3.5 v6 2014 accord

  • @travismccullough9470
    @travismccullough9470 Рік тому +15

    14mm to loosen belt tensioner but a 17mm to reinstall belt??

  • @cesarolivares7932
    @cesarolivares7932 Рік тому

    Great video. Thanks!

  • @pipag35
    @pipag35 11 місяців тому

    thank super easy 🙌

  • @daveramsay8115
    @daveramsay8115 5 місяців тому

    Great video!

  • @richardfabrizio8998
    @richardfabrizio8998 Рік тому

    Very informative thank you

  • @TeacherofFaith-mt7jt
    @TeacherofFaith-mt7jt Рік тому +1

    Thank you may you be blessed by the Lord Jesus Christ in all your ways me he make his face shine upon you and be gracious to you. In Jesus name I pray amen ❤🙏✨

  • @teddiazjr.6223
    @teddiazjr.6223 7 місяців тому

    8mm Allen tensioner bolt torque?

  • @amritChhoker-u5o
    @amritChhoker-u5o 4 місяці тому

    hey, can anyone explain what can i do now, actually I broke the 12 m bottom bolt while tightening it ,broken piece still in the mounting bracket in a car ,i don’t know what to do now !!

  • @nectros8452
    @nectros8452 Рік тому +2

    I really wished a qualification of a design engineer is that you have to be a mechanic for 5 years 1st. There is no reason why car manufactures make some of this stuff so hard to do.
    I also like how you don't use your electric ratchet to brake torque.

  • @chuckcross1546
    @chuckcross1546 9 місяців тому

    Excellent, thank you!!

  • @liamcarters8987
    @liamcarters8987 3 місяці тому

    The only problem I’m having is using that 8 MM socket. It doesnt fit?

  • @Satisfyingcleaningone
    @Satisfyingcleaningone 7 місяців тому +1

    17 mm tentioner

  • @guillermojimenez310
    @guillermojimenez310 Рік тому

    THANK FOR A GREAT VID 👍 👌