CNC Plasma Table Upgrade
Вставка
- Опубліковано 12 сер 2021
- Upgrading the homemade CNC plasma table. Check out the full CNC plasma build playlist here: • CNC Plasma Build
Check out my other videos on my channel page: / donndiy
#donndiy #homemade #cnc
Soundtrack:
Pomade - Silent Partner (UA-cam Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter - Авто та транспорт
More fabrication videos on ua-cam.com/users/DonnDIYvideos
Need more meme's i mean video ;)
@@Oerknalx p
@@Oerknalx p
@@Oerknalx p
Could you share something about how much money you saved compare to buying a similar size plasma machine? The cutter itself i guess cost more then the rest of the machine, but lets say if you were to buy a machine that comes with the same plasma specs
I think it a GREAT setup !! Nice touch with the new belt and end plates and belt tensioner helps get more cutting space for sure !! I have to say it was cool to hear you talk in this video !! I don't think you have ever spoken this much in any of your other video's it was really cool to hear !! Great video as always !! 👍👍
Cheers man!
Oh, you are so close to one million subs.. Thanks for all the cool videos, Donn. Your high level of understanding of mechanics, physics and (all the) dynamics makes you steps above the "book smart" engineers. I have worked with many (over rated engineers) in my life. They have nothing on you or I. Isn't it cool to be able to think "outside the box"? The beefing up of the plasma CAM will make everything run tight and smooth.
Će će
Amazing ! What a great workshop you have with very nice equipment ! Really cool !
Looks great, nice work and awesome upgrade. Always look forward to your uploads!
I do like the use of "do hicky" in place of "thingymebob" much more rustic hahahaha! Keep it coming Donn, we love watching you create. :)
I prefer "do hickey" too if I'm mad and can't work on my "whatchamacallit" project. I'm mad b/c I lent the last "thingamajig" I had left to my neighbor "whatshisface" who said he lost it while fixing his thingumabob project. Even worse, he already had 2 "doodads" that would've worked just fine! 😂
Thanks for sharing with us Donn, enjoyed your video. You make it look so easy. I’m impressed. Fred 🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋
You have an AWSOME workshop Donn!!! And every little upgrade you do makes it even better. 👍👍
That's the idea behind upgrades 👍🙂 Hopefully one day I can take a look at my workshop and say to myself: "It's finally done and finished, no more upgrades are needed", but I really doubt it 😁
Your knowledge and tools have advanced so much over the years. I learn something in every video. I really like the skinny paint marker you have. I'll start looking for one. Thanks a bunch and please keep the videos coming... Bill
Cheers man. I got my marker from toolmarketing.eu
Thank you, great thought of improving your Plasma
I love that plasma cutter. Really cool.
Now that's a proper workshop sink...
It looks like the men's urinal in a bar in Perth I once went to.
@@garthmonday That must have been pretty rank.....but compared to the toilet I walked into in Nepal .....indescribable..
Setup looks good Donn, I would be very happy to have this.
I don't know what: "RGB" is all about, but with regard to the series, its final outcome, and the parts it'll
produce for future builds that we all enjoy, I'd say this is a ⭐⭐⭐⭐⭐ setup/build. God bless.
Great job as always.
Excellent work👍👍👍. Thanks for sharing
Nice upgrade. Really should help when making parts for builds. Current build is the rock crusher. I am sure there are many more in the works.
Your system runs pretty fast, you did a great job!
Cheers!🙏
Great video
Hello friend🖐 ️ everything is as always at a high professional level 💪 😀 👍 👍 👍
Cheers mate! Spasibo!
*memes that made Donn take a day off hahaha*
I didn't even know what a CNC plasma cutter was until I watched this! I thought I was pretty high tec when I clamped a 2x4 to a table so I could torch cut a more or less straight line! ;)
That CNC Router of your friends looked like a handy size.
great video ,, with upgrades your machine will be even better , less room for machine mistakes even better product in the end .
Good to hear you speak more in this episode, rather than just the occasional "Like a glove ..."
😁
Dobra robota bracie jak zwykle
We got a talky ! = )
Красиво!
Отличный станок!
СПАСИБО!
Донн всё сделает!!! Красавчик! 👍💪👋
5/7 plasma setup, much wow!
What is "5/7"??
my favourite youtuber 👍👍
Very nice.
Great idea's bro 👌👌👌👌💪✌️🤞🤞🤞
Great Work Donn! I also bought one of those Makita copy's, over a year ago, and it is still working good. Mine is totally unbranded from Bangood.. So I ordered the Impact driver a couple of days ago, still waiting for it, but we will see how that one performs? It looks like they are made from the Makita mould's?
Be sure to give an update, once you have used it a lot.
Well (d) done!
Awesome 👏
Дон дай заговорил... Я в шоке. Ни чего не понимаю, но всё равно лайк. 😎👍
Spasibo!
So satisfying. :-)
Nice !
Nice mod Donn.
Exelente
100% awesome
I surely hope you don't get Meme d by that Memes! I don't care how long the angle grinder lasts as long as I can see and hear it grind! 😁👍
Excellent work, could you share the electronic schematic, structure design, configurations.
hi don, nice to hear you talk ,, your english is verry good . regaqrds richard.
cool im glad to see you got a cnc plasma machine set up id be lost without mine . i sure like the drives you used where did you get the drive strip it sure looks like it allows it to run alot smoother im in dire need of revamping my gantry and been looking for a better solution so i can run higher ipm speeds
This washing tray needs a lot of love. Beurk
Great work as always
But do you think this setup will be functionally, stable and accurate more than rack and pinion like helical gear
From down under. Donn, Q & A. Did you teach yourself all the skills you have.
Sensacional 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
You did a very nice job building this CNC. Could you tell me where to find the Alu U profile?
I'm wearing headphone and the servo motors sounded a bit louder after the drive belt upgrade. That makes me want to ask questions. Did you use a different camera or mics between takes?
Are the motors having to draw more current to compensate for added stiffness? Does the belt flexibility change between hot and cold temperatures or is it stable over a broad thermal range?
:) I know you are pretty thorough when you research stuff, nevertheless there is no harm in asking.
No lollygagging on that rock crusher. 😀
Do you think its better to do belts or a gear rack setup
Good night, laydies and gentlemen.
It’s shocking that the “Meme” brand is able to make their tools fit Makita batteries. 😉
Hopefully you get your $40 out of it before the smoke gets out of it. 💨
Yup, I'll torture this angle grinder and give you guys the results after it's grilled into not a "well-done" but an "over cooked" state. Nice and crispy.😁
Wasn't it Bosch who developed this standard battery and made it "open source" (not sure mind and apologies if this is correctly answered below!)
Hi!Just in case, be warned, the reducers of these fake makitas are sometimes "dry", you have to add the grease yourself!
Otherwise very handy tools!
Now on with the rock "CRUSHER"...L0L
Yes!💪
Finally you speak up on film😂👍 i always follow your channel(never hear you talked)but now i do.
PLASMAKUNN
What is the software you are using, great work man
As Lauri Vuohensilta would say, "pretty good". :)
Are you from finland
@@late221 No-- but I love watching the Hydraulic Press Channel.
I really like your comments in a films. You should stick to speaking. As always great content.
Witaj, jakiego rodzaju pasek został zastosowany HTD? Ile zębów na kole zębatym? Pozdrawiam👍
0:03-- сразу лайк!!)) Буду смотреть,как робот из Скайнета делает для Донни полезные в хозяйстве хреновины!!)))))))
Hmm hope these belts are not steel reinforced, as that bending will work harden steel, strings start to break and belts start to stretch. Had that issue with 3d printer..
hi. witch motors are you using. Thanks
You make me want to take all my custom brackets off of my cnc table and paint them.
Wish ya'll would make and offer plans for this. I'm sure I'm not the only one that would love to get a set!
The intellectual property is not mine to sell. It's my friend's brainchild. 🙂
Hi thank You for Shearing ?
Did you ever try to cut with nitrogen (co2) instead off atmospheric air ? i get a a lot off slagging on the backside that has to be removed with a needle hammer and the surface has to be cleaned with a grinder before welding
Hi, Svend! Nice to hear from you. I'm a big fan of your chain sawmill. 👍 I haven't used CO2 and can't say whether it's benefitial or not compared to regular compressed air. If there's too much slag on the backside you might want to play around with the cut settings - adjust feed rate and amperage. I usually get too much slag with higher amps and lower feed rate. The sweet spot is somewhere in the middle. I have dialed in settings for 3, 6, 8, 10 & 12 mm material on my machine but I still play around constantly to get even better cutting results. And to get slag off of material I just use old sharpened file, this knocks the slag right off, no need for grinding. I hope this helps! Thanks for watching!
Good stuff Donn,
Lol i noticed you use the term do hickey too !
Did you pick that up when you were here in Australia?
Cheers from Sydney Australia
🇦🇺🦘🐨🇦🇺🇪🇪
What is the advantage of making the torch mount spring loaded as opposed to the torch being rigidly mounted to the Z axis “platform?”
The "floating" torch allows for sensing the material height without binding the z axis when slewing down. There is a microswitch that is contacted when the torch floats up and the machine is calibrated to "know" how far up the torch must float to make the switch.
Needs rgb in the water tank😋
WHERE DID YOU GET THE ELECTRONICS AND PARTS AND THE PROGRAMS TO USE THIS TABLE? DO YOU HAVE A LIST?
Which belt model is the tensioner for?
You keep your shop pretty clean, however, that sink! You can use your new grinder with a wire wheel and clean it up. lol You might need a sandblaster lol
The sink does it's job mate🍻😁
@@DonnDIY True, but don`t wait till you need a jack hammer. lol
I looked online for the Memes cordless tools and didn’t find them. Am I spelling it wrong
I need this marker
Hi. Plasma torch z hight switch was differend than original version . Where i could get it or is there closer video somewhere?
My friend at Blackloop CNC made it. Look up blackloop.ee and contact him. He can make you a set if you want.👍
Ничего не понятно, но очень интересно!
🤘
👍👍👍👍👍👍
👍
I have the same grinder, mine is branded Drill Pro. Project Farm called 'em cousin Eddy. Think AVE had another name
Yeah, this is exactly the same thing as DrillPro. My friend has one too. We'll have an angle grinder frying competition going on. I'm planning on winning. 😁
👍 👍 👍
Judging by the state of your sink, it looks like the cleaning lady hasn't been in again.
Must be making bank on UA-cam... paying for Memes... LOL.
Best memes are free though 😁
W
Plasmakunn is not that far away from the Swedish word for the same, plasmakung 👍😀
Yes it is close, but "kunn" is a slang word for "kuningas" that translates to king or in swedish kung.
Do you have blueprints for the project
I have drawings for the steel table frame I made. My buddy at blackloop.ee who built the CNC side of the table has all the CNC related drawings.
👍😆
Tagumik!
what happened to the rock crusher?
Obviously it's still an ongoing project.😉
UTV video when?
What pen are you using?
Can't recall it on the top of my head.
Amazing, one must take care of tools so tools take care of the job. Also I’d rate your setup 69/10 😹
Hei Donn. Oskad nõu anda? Mul plasma 100A, 1.5x3m laud. Plasma peaks lõikama 12mm terast, ja seda ta ka teeb. Plasma juga uute düüsidega, elektroodidega jm. tuleb otsast nagu instant kalde all. Mis probleem olla võib? Õhk on kuiv, ampreid piisavalt, otsikud uued. Pink on aasta vanune. Ja see mure on algusest peale mind kummitanud. Tavaliselt on nii, et alguses lõikab paar detaili mõne avaga enamvähem sirgelt, mitte alati, vahel lõikab ka kohe nurga alla. Kõik mis jahutusest sõltub, siis olen püüdnud need väikesed avad puhtana hoida jne. Ikka ei midagi. Tead vb mõnda kirjandust või kedagi, kellel see probleem on olnud vn?
Ahoi! Kõike muud olulist mainisid peale õhusurve. St. kas kasutad plasmalõikurile ettenähtud survet? Äkki liiga väike ja sellepärast ei puhu korralikult vertikaalselt läbi materjali? Saan ainult arvata, aga ega ma ka täpselt ei tea. Endal 12mm materjali lõigates on nii olnud, et uued kuluosad sisse, kõik põleti kilbi jahutusavad puhtad, aga paari esimese läbistusega sülgab kilbi ja düüsi vahele sodi ja õhk ei tule enam ühtlaselt läbi ja lööb lõike kalde alla. Natukese ajaga tavaliselt puhub ikkagi puhtaks ja lõige läheb sirgemaks. Kilbi piserdan aegajalt keevituskäpa spreiga üle, et sodi nii hullult kinni ei võtaks. Rohkem ei oska midagi arvata eeldades, et juhtprogrammis on eendekiirused paigas.🤔
How burned did your wrists get?
When we going get a Q&A learn about the man
heeey, where is crock rusher?
👍💯🤜🔥🤛🤘💯💯💯
You're the "Plasmakung" (/Swedish)