Це відео не доступне.
Перепрошуємо.
What my 4efe engine needs before turbo install | Toyota Starlet 4efe turbo build.
Вставка
- Опубліковано 13 лип 2022
- Started preparing the Toyota Starlet EP91 4efe engine for the turbo install. TD04 Turbo oil feed, log manifold test mounted, Tuning developments 3” Glanza exhaust pipe built up etc. Lots of work to help finalise the turbo position on the manifold.
Don't forget to like, comment, share and subscribe!
Instagram: @dan91sgarage
Disclaimer: These videos are meant as entertainment only. They are only a vlog of the work I have carried out on my cars and not meant to be instructional in any way! Working on cars can be dangerous and the results can cause harm to yourself, your vehicle and others! Be careful, be safe and only you are responsible for your actions.
#toyotastarlet #starlet4efeturbo #glanza
What turbo is this your using mate
It's a Maxpeedingrods TD04l for a Subaru impreza.
Unboxing and strip down: ua-cam.com/video/eQpzX1vvfqE/v-deo.html
Turbine housing porting: ua-cam.com/video/r423LaEJLBY/v-deo.html
From mauritius ❤❤
Just found your channel, I’m from the US and just got a Starlet with the standard 1.3 no turbo, but hopefully I can get a turbo for it in the future
Welcome along friend 👍. I have an entire playlist dedicated to the whole process.
Want to so the same project to my starlet too
Excellent 😄👍
building my corolla 94 4efe turbo
U build it brother ? I am going to build mine soon !!... How the project is going ?
Yes its finished...only my ecu det 3 needs a tune.....i want to hook up a toggle switch for launch control but dont know how to do it.
I am wanitng to do the same rn. I am looking at a glanza turbo, but I am unsure of the total costs and the list of things i need to complete a medium to low boost setup. Is there any experience, you would like to share?
good day sir, what kpa or psi is your radiator cap? 0.9kpa(13psi) or 1.1(16psi)? thank you very much! is it good also for long drive?
I'm using a Civic half radiator from Tegiwa and it comes with a 1.3 bar rad cap. No problems with it.
Install video:
ua-cam.com/video/RpA2T589Y-A/v-deo.html
apart from the manifold, what is necessary to upgrade?
Hello currently I am driving 4efe 1.3liter 4 speed manual I want to upgrade it to 5 speed manual gear box which gear box I should use currently I am using c140
Thank you
A C150 or C151 from a tercel/corolla II, Paseo, or non-turbo high grade starlet will drop in
if you're willing to do some more convoluted work for a gearbox that could handle a decent bit more torque than stock you can get a C52 from like, 1993-2000 corolla and mount it to the C140 bellhousing
I sir very good job can you sent me all link you buy your turbo and your ecu box all so
Thanks,
Maxpeedignrods turbo, Subaru TD04l 13t-6: www.maxpeedingrods.com/product/subaru-forester-xt-impreza-wrx-nb-2.0l-58t-td04l-13t-6-turbo-turbocharger.html
ECUmaster DET3 with in built 4 bar MAP sensor, check the distributors page for your country:
www.ecumaster.com/products/digital-ecu-tuner-3/
Thanks sir is the engine 4efe will support the torbo well or can damage the engine??
As long as the engine is in good condition, you are sensible with the level of boost, have good fuel quality and have a good tune in the det 3 these engines are good.
@@dan91sgarage ok thanks
What type of radiator is it
It's a Honda Civic 92-00, 2 core, half width, aluminium radiator from Tegiwa. Full install episode here: ua-cam.com/video/RpA2T589Y-A/v-deo.html
Can i convert stock 4afe 1.3 into turbo?
Please anyone guide me about requirements...
The videos in my Starlet turbo playlist covers every part needed to turbocharge a 4efe powered EP91.
You've Instagram
@Jake Brown Yes: dan91sgarage