I do this for a living and use the exact same model of pro tote. Only difference is I only use two chains from the front drive axel all the way to the boom and I use a pair of vice grips to hold the bumper in place. Also a suggestion to drivers using this, secure the steering wheel first before lifting the truck and add a ratchet strap through the steering wheel and over the seat belt then back through the steering wheel. Attach both ends to the bottom of the seat. Trust me it helps keep those steers from shifting. Just thought I could help
Thanks for your input Jay! I have used the two chain option also and it does work great. I have found, though, that for truckers that don't do this every day it breaks it down and simplifies the process. Dealing with four chains instead of two has it's benefits of shorter and lighter chains making it easier to work with. Keep on Truckin' Jay!! Stay safe!
I am a tower and I have no problem with guys using these, but do it right. This guy knows what he's doing, but here are some other pointers. 1: release all the air out of the rear air bags then chain them up, if it's easy just pull a line of one of the rear bags. You can plug it back in once the truck is out of air. 2: the rear axle chain should be longer so you can hook the frame right above the axle, the way it's done in the video could cause damage to the breaks so just a heads up on that. 3: tie your steering wheel like he tells you, but get a ratchet strap and run it from the seat base through the bottom of the wheel, this is to be used as a safety. 4: fold in your mirrors. Volvos push them forward towards the hood, the rest backwards. 5: secure your fairings, use ratchet straps three per side, 2 on bottom big fairing and one 1 on top per side 10 or 12 ft length recommended.
I'm not a Tower, but your Extra Tips made Damn Good Sense. Going to have an old '74 International Paystar 5000 transported on a trailer more likely 220 miles to my land. P.s. Thanks for sharing.
I didn’t have a clue about using this towing method!! After seeing this video you made it so easy to understand and tow our own trucks now!! Appreciate it brother!!
i have used this video to explain to my drivers how to use my protote 9 max. there are a few points to ad 1 safety chains and 2 steering wheel securement should have an additional strap thru the steering wheel to the bottom of the seat. and a light bar for directionals and brake lights and driving lights! but this is the best example of how to i have seen explained.
Excellent video, professional advice! I can see this guy knows what he does. I need it to see a good video like this, I’m going to use it in a couple of weeks and it’s definitely my best pick. Thank you and keep doing videos like this where people can understand them and get benefit from it
So I drove a 30 ton wrecker for 10 years. You missed several major steps. First you dump the air ride suspension before hooking up the axle chains. Then after lifting the truck to your transport height, check how tall the truck is now (never assume it's ok). Most states require 4 points of Securement, so that 2 lift chains and 2 safety chains. I know it's obvious but you did not say to make sure the front wheels are straight, not just the steering wheel is centerd. Then lastly two lights are a good idea, even if not required by state laws. Bare minimum put the hazard lights on
Dean T also tie down cab extenders off with ratchet straps or they will break off. Being towed from the rear causes the extenders to act like a parachute n can cause major damage
Ok, good. We have a couple of heavy operators in here. I did this for years and did a few things different. First, never rely on the rear axle as a pull point. First, dump the air bags and chain up the front tandem as shown here. Run the chains under the axle and clip the top of the frame. Use a length of angle iron that leaves about six inches of it outside of the chains. If the truck being towed shifts, I'm not sure those nipples will stop it. There are a couple other thing as well. Anyway, The idea here is good and I've seen them used several times so I guess they work but if I had my $150k rig one the line and no knowledge of towing, im pretty sure I would call a towing service with a professional driver/operator to do the job. Thats just me though.
Missed a very important step which is air out the rear end before chaining the tandem and lifting makes everything much easier and safer to work with as well as giving you up to 8 more inches of clearance on rear wheels
Woww thank You very much for Your tutorial, Im in process to buy a model 10 equipment but I had a lot of questions in how to tow, now I thank God I found You, thanks again
solid operation, the only thing I dp differently is I hook the rear axle chains to the frame then under the axle and back to the boom. i usually use one chain per side and go from the frame in front of the front axle, holds both axles up that way. oh, and definitely dump the air suspension on both trucks during the hook up process, especially when unhooking...
No worries Shane! It is a lot simpler than the tow companies want you to think. You will save a ton of money doing it yourself. Thanks for the comment.
Also need to tie down cab/bunk extenders. Towing truck from behind causes a lot of air drag n causes the extenders to flap n can cause cracks in fiberglass
Good video. Just wanted to point out that tube you keep calling a slack adjuster is actually the S cam tube. The slack adjuster is the thing that slides onto the S cam shaft, located at the inner end of the S cam tube.
recommend one thing--I hauled a carnival rig with midway light towers 500 miles to West Virginia-(1970's)-there was a "pin" holding the two ton towers in place on the truck bed--the towers were on small wheels because they were pulled onto the truck sideway's up ramp's by a winch-I left Crown Point Indian fairground's with all five tower's-two on the truck--three on the trailer--I got down to the Kentucky Parkway--4 lane-about half way to Beckley West Virginia which was my destination-I looked in the rear view mirror(by habit0and noticed the front tower was slowmy "rolling" back and forth on the bed--I never eased off more gently on the gas-and slowly braked into the emergency lane--very lucky--almost lost the tower which would have landed on any one who happenedto be parked in the emergency lane--pure "lottery"-the spring clip or at least a wire had not been placed in a pin holding the tower in place preventing it from rolling siday';s off the bed-as the tower "jostled" intermittantly sidway's while driving--the pin actually worked it's way "up" and fell out --I found it on the bed- A real "near miss" on the highway--I am refering to that "bar" you use under the beam and piston--vibration could possibly cause it to slide out--strange thing';s happen--!!---from "Thomas Joyland Carniva"l---I was a "one shot" hiree for the trip-$150 including road money back then--had nothing to do on the farm that week---so I thought I would try "Carny" business for a break of routine-- those "little'thing's" which an mean a lot--disaster potential-enjoyed your video--stay aware
Grow up with my fathers tow company , why not have a long chain that goes under both tandem axles hooks the fame braved behind the fifth wheel frame and back to the tow bar ?, like it’s done with the standard tow truck ? I ran a Pete with a 750 Holmes for my father long ago
I'm still looking for a slack adjuster he's saying go-between and that's not a slack adjuster that is a tubing that holds the cam which the slack adjuster is fastened to I have set up I only use 2 Chainz hook it to the front axle bring it back under the rear axle and back to the pro tote and it works wonderfully
just like that, are you sure about that, dingo all right ok. how the hell is a renter going to remember all that crap, g dingo you earned your pay this week.
John Smith Hey John, thanks for watching. Remember to subscribe. Hey bud, if you watch the video at 11 minutes 42 seconds it starts explaining where that pin goes. Let me know what you think?
@@tylertucker4478 they have a system that ties into the front brakes of the truck that allows the truck being towed to break with the front brakes just like having trailer brakes if you've ever towed a truck you would know when you break the truck being towed will push you forward. If I don't know about the brakes on my truck I shouldn't be driving okay if you don't know what you're commenting on you shouldn't be commenting.
@@purolaerte actually I do know. Been running a heavy wrecker for almost 10 years. Most of you're front brakes are single pod. And I've towed thousands of trucks from the rear and never had a truck push me. If u run into one that pushes u probably shouldnt be towing it from the rear just saying
I’m Towing 30 Years With A Chain Lift. You Need Two Extra Safety Chains if The Initial Set Snap, (and They can And Do it. ), and Separate Anchorage just Incase, PS. Don’t Know if America Do Anti Speed Ramps , we Do in Europe, if The Truck Being Towed , Is Not High Enough, when it Hits The Ramps It’ll Jump Out Of The Chains, and it’s In The Hand Of God After That, BE SAFE AND FIT An EXTRA SET OF safety Chains. I’m Towing Since 1989. 👍🍀 Be Safe and God Bless all.
People keep saying an extra set of safety chains need to be attached. Where do we attach the other set of safety chains? Just starting, all help is very much appreciated 🙏
@@hotrodhog2170 No it isn't. Ratchet straps to the seat mount are safer, won't put stress on the steering column and can be removed without an air supply. I used a 5/8 nylon noose rope with a knot outside the door closed on the rope.
Guys thanks for your comments. I’ve been towing trucks with this boom for over 15 years and have used the seat belt method and have NEVER had any issues what so ever. I have heard of the ratchet method and it’s good too. Thanks for your comments. Safety is our top priority.
I do this for a living and use the exact same model of pro tote. Only difference is I only use two chains from the front drive axel all the way to the boom and I use a pair of vice grips to hold the bumper in place. Also a suggestion to drivers using this, secure the steering wheel first before lifting the truck and add a ratchet strap through the steering wheel and over the seat belt then back through the steering wheel. Attach both ends to the bottom of the seat. Trust me it helps keep those steers from shifting. Just thought I could help
Thanks for your input Jay! I have used the two chain option also and it does work great. I have found, though, that for truckers that don't do this every day it breaks it down and simplifies the process. Dealing with four chains instead of two has it's benefits of shorter and lighter chains making it easier to work with. Keep on Truckin' Jay!! Stay safe!
I am a tower and I have no problem with guys using these, but do it right. This guy knows what he's doing, but here are some other pointers. 1: release all the air out of the rear air bags then chain them up, if it's easy just pull a line of one of the rear bags. You can plug it back in once the truck is out of air. 2: the rear axle chain should be longer so you can hook the frame right above the axle, the way it's done in the video could cause damage to the breaks so just a heads up on that. 3: tie your steering wheel like he tells you, but get a ratchet strap and run it from the seat base through the bottom of the wheel, this is to be used as a safety. 4: fold in your mirrors. Volvos push them forward towards the hood, the rest backwards. 5: secure your fairings, use ratchet straps three per side, 2 on bottom big fairing and one 1 on top per side 10 or 12 ft length recommended.
I really appreciate the feedback and your input! Great advise and awesome pointers! Thanks for taking the time to comment and help out!
I'm not a Tower, but your Extra Tips made Damn Good Sense. Going to have an old '74 International Paystar 5000 transported on a trailer more likely 220 miles to my land. P.s. Thanks for sharing.
I see them things all the time and wondered how it worked. Learned something new! Thanks D.
是
I didn’t have a clue about using this towing method!! After seeing this video you made it so easy to understand and tow our own trucks now!! Appreciate it brother!!
The best instructor I seen thank you so much for it ever He really knows teaching this
i have used this video to explain to my drivers how to use my protote 9 max. there are a few points to ad 1 safety chains and 2 steering wheel securement should have an additional strap thru the steering wheel to the bottom of the seat. and a light bar for directionals and brake lights and driving lights! but this is the best example of how to i have seen explained.
That camera guy drove me nuts with the zooming in and out!
Auto focus. Some cameras are noiser then others :)
@@TutorialPanda It ain't auto focus. The idiot running the camera was zooming in and out the whole time!
Excellent video, professional advice! I can see this guy knows what he does. I need it to see a good video like this, I’m going to use it in a couple of weeks and it’s definitely my best pick. Thank you and keep doing videos like this where people can understand them and get benefit from it
This video was better than the actual pro tote video, thank you, very helpful!
So I drove a 30 ton wrecker for 10 years. You missed several major steps. First you dump the air ride suspension before hooking up the axle chains.
Then after lifting the truck to your transport height, check how tall the truck is now (never assume it's ok).
Most states require 4 points of Securement, so that 2 lift chains and 2 safety chains.
I know it's obvious but you did not say to make sure the front wheels are straight, not just the steering wheel is centerd.
Then lastly two lights are a good idea, even if not required by state laws. Bare minimum put the hazard lights on
Dean T also tie down cab extenders off with ratchet straps or they will break off. Being towed from the rear causes the extenders to act like a parachute n can cause major damage
Hey man I’m with you I operated a 75 ton century rotator and I have one of boom systems as well and he forgot to do many major things
Wow I don’t know how he thinks his system is safe
Ok, good. We have a couple of heavy operators in here. I did this for years and did a few things different. First, never rely on the rear axle as a pull point. First, dump the air bags and chain up the front tandem as shown here. Run the chains under the axle and clip the top of the frame. Use a length of angle iron that leaves about six inches of it outside of the chains. If the truck being towed shifts, I'm not sure those nipples will stop it. There are a couple other thing as well. Anyway, The idea here is good and I've seen them used several times so I guess they work but if I had my $150k rig one the line and no knowledge of towing, im pretty sure I would call a towing service with a professional driver/operator to do the job. Thats just me though.
Dude you Nailed iT, GREAT JOB 🎉
Great info
Been a cdl driver for almost 30 years
Thanks for this info
He kinda look like the flex glue guy👀
This guy makes my feel like instead of using chains hes gonning to use flex tape
Good video... I owned a boom many years ago, but was wench operated. Hauled many trucks. Miss it! Thanks for doing this.😳
Hey no worries. Just trying to help where I can. Wrecker’s are so expensive and this is very simple to do and it saves you thousands.
Missed a very important step which is air out the rear end before chaining the tandem and lifting makes everything much easier and safer to work with as well as giving you up to 8 more inches of clearance on rear wheels
Lol my truck I will have to tow in a few weeks, has an air leak anyway so that's good to know 😅
This guy makes my feal like instead of using chains hes gonning to use flex tape
Lol
Lmao man that was to funny cuz i can see that too. Im crying over here 😀
Nicely done. Very informative video. Good job guys. Gino your Afrotrucker from Cape Town in South Africa
Looks like a good unit and nice work on the rigging ! That's how we do it with a 750 Holmes bed .
Best video I’ve seen on this yet!!
Excellent explanation about it...Thank you very much.. I did exactly the way you showed and work perfectly....thank you!!!
Woww thank You very much for Your tutorial, Im in process to buy a model 10 equipment but I had a lot of questions in how to tow, now I thank God I found You, thanks again
solid operation, the only thing I dp differently is I hook the rear axle chains to the frame then under the axle and back to the boom. i usually use one chain per side and go from the frame in front of the front axle, holds both axles up that way. oh, and definitely dump the air suspension on both trucks during the hook up process, especially when unhooking...
Thank you I did the same thing and everything was fine towing Arizona to newark NJ 🎉
No worries Shane! It is a lot simpler than the tow companies want you to think. You will save a ton of money doing it yourself. Thanks for the comment.
Tu sabiduría nos ayudó mucho 💕
Also need to tie down cab/bunk extenders. Towing truck from behind causes a lot of air drag n causes the extenders to flap n can cause cracks in fiberglass
Good video. Just wanted to point out that tube you keep calling a slack adjuster is actually the S cam tube. The slack adjuster is the thing that slides onto the S cam shaft, located at the inner end of the S cam tube.
recommend one thing--I hauled a carnival rig with midway light towers 500 miles to West Virginia-(1970's)-there was a "pin" holding the two ton towers in place on the truck bed--the towers were on small wheels because they were pulled onto the truck sideway's up ramp's by a winch-I left Crown Point Indian fairground's with all five tower's-two on the truck--three on the trailer--I got down to the Kentucky Parkway--4 lane-about half way to Beckley West Virginia which was my destination-I looked in the rear view mirror(by habit0and noticed the front tower was slowmy "rolling" back and forth on the bed--I never eased off more gently on the gas-and slowly braked into the emergency lane--very lucky--almost lost the tower which would have landed on any one who happenedto be parked in the emergency lane--pure "lottery"-the spring clip or at least a wire had not been placed in a pin holding the tower in place preventing it from rolling siday';s off the bed-as the tower "jostled" intermittantly sidway's while driving--the pin actually worked it's way "up" and fell out --I found it on the bed-
A real "near miss" on the highway--I am refering to that "bar" you use under the beam and piston--vibration could possibly cause it to slide out--strange thing';s happen--!!---from "Thomas Joyland Carniva"l---I was a "one shot" hiree for the trip-$150 including road money back then--had nothing to do on the farm that week---so I thought I would try "Carny" business for a break of routine-- those "little'thing's" which an mean a lot--disaster potential-enjoyed your video--stay aware
Wow what a story! Thanks for sharing it! You’re right you can never be too safe! Stay safe and keep on truckin!
I just did this with two trucks after the holidays :-)
Up to wa back to ca
Question, how much do You charge per mile? Or You also rent the equipment?
No safety chains requires in your jurisdiction? Many places do!
Thanks a lot for this knowledge !!!!! Very appreciated !!!!!❤❤❤
Very nice presentation. Well done.
How about safety chains a lot of states require safety chains.
Very enlightened video, if i ever need this type of tow boom ill definitely reference this video. Thanks alot
Dot in my area would not like the seatbelt to the wheel. They require straps.
Nice video with clear instructions
You can hear camera-man Darth Vader breathing, "Use the Chain Luke" Yoda would be proud😁👍
Great video. Congrats👏👏
Grow up with my fathers tow company , why not have a long chain that goes under both tandem axles hooks the fame braved behind the fifth wheel frame and back to the tow bar ?, like it’s done with the standard tow truck ? I ran a Pete with a 750 Holmes for my father long ago
Thank you, nice explanation 🎉
your video very helpful thanks
Tks Friend God Bless you
Sir what about the tail lights?? Im going to tow my truck from Kansas city Missouri to Phoenix Illinois
I towed my rig from Kansas city Missouri to Phoenix Arizona
Thanks a millon for the tutorial brother, very informative. God bless
Does Caleb comes with the kit😂😂😂
how do you connect the lights that go on the grill of the truck being towed?
Great video very very helpful
Very helpful. Thank you!
Great video tutorial
I'm still looking for a slack adjuster he's saying go-between and that's not a slack adjuster that is a tubing that holds the cam which the slack adjuster is fastened to I have set up I only use 2 Chainz hook it to the front axle bring it back under the rear axle and back to the pro tote and it works wonderfully
Woww beautiful, well explained thank You very much I really apreciate since Im looking to buy one Esther like these or the Zack permanent mounted
Is this the “job site” boom?
Great video.
Thanks for sharing.
What about the light bar ?Thanks William
Where can we find these tools in North Dakota?
Thank you very much it helped me a lot today
No worries! That’s exactly the reason I made this video. It’s very simple once someone shows you.
Mucha gracias bien explicado amgo
That’s for this info brother
What is the. Charge. Sir
That was a need-to-know video
just like that, are you sure about that, dingo all right ok.
how the hell is a renter going to remember all that crap, g dingo you earned your pay this week.
Hey Mark...it's a video. They can view it as many times as they wish and can rewind and pause on any portion of it.
Is it legal to do it interstate?
Good job
Thank you very much
What happens if the truck doesn’t start. Yiu wont have air in the tank to move west up and down
Do I need a tow permit to use this?
You just need a class A CDL
Thanks I gonne do my first time this Visio help me thsnks
How much does this unit cost to own. I’m interested in purchasing one. Any help with that? Thank you
These things are like $10k
Great Job Mon, I am going to be towing my First Truck in Few Weeks. Thanks for the Help Mon!
No worries. We are here to help!!
Wondering how much will cost everything
pavel1809 Hey, thanks for you comment! Call us at 904-783-8187. Please don’t forget to subscribe.
Helped me alot thanks
Thank you
Thank you bro
Does it hook up from the front too?
Interested
Thanks brother
Thanks for the video
No worries! Glad to help!
Great video
wonderful explanation and I wish you to be my instructor.
So what about the pin? The one you sat on the frame at the begining of the video?
John Smith Hey John, thanks for watching. Remember to subscribe. Hey bud, if you watch the video at 11 minutes 42 seconds it starts explaining where that pin goes. Let me know what you think?
Wheres the safty chains, tow lights at. Quick question why use the seatbelt and not a ratchet strap or a device that holds it in place
I use seat belts in all the cars/trucks i haul as well
Hey Jon, seat belts have just as heavy duty rating than most of your straps so it's perfect for this.
Thanks
Good video where I can rent one ☝️
Where's your safety chains?
Perfect
Well done
Looks like air wasn't dumped on truck being hooked up an don't like that chain on last air bag on axle rubbing on it
How much the rent costs.?
Great video. Thanks for sharing.
I’d rent one if you were close to ft Smith Arkansas.
What about the front brakes.
What do you need front brakes for????
No need to do anything. The truck will roll just fine.
Lol front brakes.... if you dont know how you're brake system works you shouldnt be driving
@@tylertucker4478 they have a system that ties into the front brakes of the truck that allows the truck being towed to break with the front brakes just like having trailer brakes if you've ever towed a truck you would know when you break the truck being towed will push you forward. If I don't know about the brakes on my truck I shouldn't be driving okay if you don't know what you're commenting on you shouldn't be commenting.
@@purolaerte actually I do know. Been running a heavy wrecker for almost 10 years. Most of you're front brakes are single pod. And I've towed thousands of trucks from the rear and never had a truck push me. If u run into one that pushes u probably shouldnt be towing it from the rear just saying
I need a truck towed can you please help
I thought those were S-Cam tubes🤔🤔🤔
you need a wet kit??
Why just no take ignition key out and lock the wheel , that how I lock wheel when towing car van small lorry’s in the UK
The wheel doesn't lock on big trucks in usa
Awesome thank you for your help trucker
904..... Must be in the Jville area??? 👍
Yes right off of Commonwealth and Lane Ave
I’m Towing 30 Years With A Chain Lift.
You Need Two Extra Safety Chains if The Initial Set Snap, (and They can And Do it. ), and Separate Anchorage just Incase,
PS. Don’t Know if America Do Anti Speed Ramps , we Do in Europe, if The Truck Being Towed , Is Not High Enough, when it Hits The Ramps It’ll Jump Out Of The Chains, and it’s In The Hand Of God After That,
BE SAFE AND FIT An EXTRA SET OF safety Chains. I’m Towing Since 1989.
👍🍀 Be Safe and God Bless all.
People keep saying an extra set of safety chains need to be attached. Where do we attach the other set of safety chains? Just starting, all help is very much appreciated 🙏
А самосвал как буксировать ?
The truck you are towing may not have air to play with seat so use ratchet straps
all that time you put into making the tow device and all you can come up with to hold the steering wheel is to use the setbelt , well !
That's the way all wrecker drivers do it too.
@@hotrodhog2170 No it isn't. Ratchet straps to the seat mount are safer, won't put stress on the steering column and can be removed without an air supply. I used a 5/8 nylon noose rope with a knot outside the door closed on the rope.
Guys thanks for your comments. I’ve been towing trucks with this boom for over 15 years and have used the seat belt method and have NEVER had any issues what so ever. I have heard of the ratchet method and it’s good too. Thanks for your comments. Safety is our top priority.
nove video body tanks 👍